You are on page 1of 2

Battery cabinet SY-310

AutroSafe interactive fire detection system


Product Datasheet
116-P-SY310/CGB, rev. C, 2009-01-22 Protecting life, environment and property

Features
For 24 VDC sealed lead-acid batteries
Capable of surface or flush mounting and for
rack mounting in standard 19 cabinets
Designed to meet EN 54 and LPCB
requirements and conforms to CE standards
Complies to environmental conditions of IEC-
721-3-3 class 3k5
Description
The Battery cabinet SY-310 is prepared for
decentralized power distribution to panels/units in
the AutroSafe interactive fire detection system.

The cabinet has room for 2 batteries with a
maximum capacity of 24V / 27Ah (2x12V / 27Ah). To
obtain capacities greater than 24V / 27Ah, several
cabinets in a rack can be utilized.

The battery cabinet includes fuses and terminal
blocks for cable connection.

The power supply BSS-103 in the fire alarm control
panel BS-310/320 / controller BC-320 is provided
with temperature control for temperature
compensated battery charging voltage. The
temperature sensor is located in the battery cabinet
to allow different environments.

When a solution with external battery connection is
used, the sensor must be removed from the Power
Supply BS-103/01. A 3m cable (delivered with the
battery cabinet) must then be connected between
the power supply BSS-103/01 in the fire alarm
control panel / controller and the external
temperature sensor mounted on a connector in the
battery cabinet SY-310. (Please refer to the
installation handbook 116-P-ASAFE-BC/DE).




It is recommended that the batteries be replaced at
least every 4 years (depending on temperature).
When batteries are replaced, only batteries of the
same type should be used.

Power
Fire Brigade Msg
Fire Vent Activated
Fire Ext Activated
0
A L A R M
?
C
9 8 7
6 5 4
3 2 1
Silence Buzzer
Silence Sounders
Reset
More Alarms
Prewarning
Early Warning
SystemFault
FunctionDisabled
Test
Fault
Self Verify
General Alarm
Power
Fault
Self Verify
AutroLON
Fire AlarmControl Panel BS-320
with1Detector Loop.
Built-in battery, maximum24VDC/12Ah
and3Acharger.
Controller BC-320
with 1 Detector Loop.
Built-in battery, maximum24VDC/12Ah
and3Acharger.
220VAC 220VAC
INFORMASJONSPANEL
More Alarms
Silence Buzzer
Power
Prewarning
General Alarm
Early Warning
A L A RM
Fault LED Test
24VDC
Information
Panel BV-320 /
Repeater
Panel BU-320
Power
Fire Brigade Msg
Fire VentActivated
Fire Ext Activated
0
A L AR M
?
C
9 8 7
6 5 4
3 2 1
Silence Buzzer
Silence Sounders
Reset
More Alarms
Prewarning
Early Warning
SystemFault
FunctionDisabled
Test
Fault
Self Verify
General Alarm
Power
Fault
Self Verify
AutroLON
FireAlarm
Control Panel BS-320
with3Acharger.
Controller BC-320
with3Acharger.
220VAC 220VAC
Power
Fault
Self Verify
Power
Fault
Self Verify
BatteryCabinet
SY-310
Built-inbattery,
maximum
24VDC/24Ah
Battery Cabinet
SY-310
Built-inbattery,
maximum
24VDC/24Ah
24VDC 24 VDC
INFORMASJONSPANEL
More Alarms
Silence Buzzer
Power
Prewarning
General Alarm
Early Warning
A L A R M
Fault LED Test
24VDC
Information
Panel BV-320/
Repeater
Panel BU-320
Battery cabinet SY-310
AUTRONICA FIRE AND SECURITY AS
Head office, Trondheim, Norway Tel: +47 73 58 25 00, fax: +47 73 58 25 01, e-mail: info@autronicafire.no
Oil and Gas di vi sion, Stavanger, Norway Tel: +47 51 84 09 00, fax: +47 51 84 09 99
Maritime di vision, Spikkestad, Norway Tel: +47 31 29 55 00, fax: +47 31 29 55 01

Visit Autronica Fire and Security AS website: www.autronicafire.com



Technical specifications
Dimensions 350x350x194 mm
Weight without
batteries
7,5 kg
Materials Steel cabinet, aluminium and ABS
molded front
Mounting Surface or flush mounting
Degree of protection IEC-529 / IP30
Batteries 2 x 12V =24V / 27Ah (not included)
Communication Temp. sense 2-wire connection

Part number Description
116-SY-310 Battery cabinet, with space for 2
batteries
Accessories: Batteries, 2x12V / 27Ah

Dimensions (mm)

You might also like