FURNISHING AND FINISHING WORKS OF INCOME TAX DEPARTMENT PORTION IN MCD CIVIC CENTRE, NEW DELHI
VOLUME V
PRICE SCHEDULE
ENGINEERING PROJECTS (INDIA) LIMITED (A GOVT. OF INDIA ENTERPRISE) Core-3, Scope Complex, 7, Lodhi Road, New Delhi-110003 TEL NO: 011-24361666, 24366226 FAX NO. 011- 24363426
1 1 a b c NON SCHEDULE ITEM 103,859,000.00 AS PER DSR -- MODULAR FURNITURE NON SCHEDULE ITEM 38,345,000.00 AS PER DSR -- CHAIRS NON SCHEDULE ITEM 356,666,856.00 AS PER DSR 16,204,941.00 CARPENTARY/ JOINERY/ FC WORKS/ FLOORING/ CIVIL WORKS. INTERIOR WORKS In Figures In Words In Figures In Words TOTAL AMOUNT 2 3 4 5 6 NAME OF WORK : FURNISHING AND FINISHING WORK OF INCOME TAX PORTION IN MCD CIVIC CENTRE, NEW DELHI. PRICE SCHEDULE S. No DESCRIPTION ESTIMATED COST (RS.) TO BE QUOTED BY TENDERER % (-) BELOW / AT PAR AMOUNT (-) BELOW /AT PAR 1 1 In Figures In Words In Figures In Words TOTAL AMOUNT 2 3 4 5 6 S. No DESCRIPTION ESTIMATED COST (RS.) TO BE QUOTED BY TENDERER % (-) BELOW / AT PAR AMOUNT (-) BELOW /AT PAR d e f g AS PER DSR -- ARTWORK AND INTERIOR LANDSCAPING NON SCHEDULE ITEM 5,653,500.00 AS PER DSR -- SIGNAGES NON SCHEDULE ITEM 9,197,000.00 AS PER DSR -- ACRYLIC BLINDS NON SCHEDULE ITEM 1,992,500.00 AS PER DSR -- CARPET 2 1 In Figures In Words In Figures In Words TOTAL AMOUNT 2 3 4 5 6 S. No DESCRIPTION ESTIMATED COST (RS.) TO BE QUOTED BY TENDERER % (-) BELOW / AT PAR AMOUNT (-) BELOW /AT PAR h 2 a NON SCHEDULE ITEM 103,132,737.00 AS PER DSR -- INTERNAL ELECTRIFICATION WORK ELECTRICAL WORKS NON SCHEDULE ITEM 89,434,000.00 AS PER DSR -- LOOSE FURNITURE AND CAF FURNITURE NON SCHEDULE ITEM 11,090,000.00 3 1 In Figures In Words In Figures In Words TOTAL AMOUNT 2 3 4 5 6 S. No DESCRIPTION ESTIMATED COST (RS.) TO BE QUOTED BY TENDERER % (-) BELOW / AT PAR AMOUNT (-) BELOW /AT PAR 3 4 a 5 SPRINKLER SYSTEM ( Down Pendants & Modification)+ Fire fighting and PLUMBING SYSTEM NON SCHEDULE ITEM 66,963,200.00 AS PER DSR -- DUCTING, INSULATION AND ALL HVAC RELATED WORKS HVAC NON SCHEDULE ITEM 9,605,767.00 AS PER DSR -- Networking cabling and termination on the patch panels and on the workstation side 4 1 In Figures In Words In Figures In Words TOTAL AMOUNT 2 3 4 5 6 S. No DESCRIPTION ESTIMATED COST (RS.) TO BE QUOTED BY TENDERER % (-) BELOW / AT PAR AMOUNT (-) BELOW /AT PAR 6 7 TOTAL PRICE 840,312,418.00 TOTAL 840,312,418.00 NON SCHEDULE ITEM 10,900,000.00 AS PER DSR -- AUDIO & VIDEO EQUIPMENTS NON SCHEDULE ITEM 3,227,280.00 AS PER DSR -- KITCHEN EQUIPMENTS NON SCHEDULE ITEM 13,879,310.00 AS PER DSR 161,327.00 5
INTERIOR WORKS
INCOME TAX DEPARTMENT SUMMARY OF COST Sl. No. Description MR ITEMS DSR ITEMS PART - A Flooring & Cladding Works 91444814 689,150.00 PART - B False Ceiling Works 21235074 8,284,650.00 PART - C Partition & Panelling 89279563 PART - D Doors and Windows 62185892 PART - E Storage Cabinet 54234955 PART - F Finishing Works 9121000 PART - G Miscellaneous Works 10488863 PART - H Civil Works 12942423 2,941,597.50 PART -I Steel Works 2676385 PART - J Dismantling Works 3057888 TOTAL AMOUNT 356666856 11915398 Applying the latest cost index on DSR items 16204940.6 Grand Total with all Taxes 372871796 Design Plus A unit of Gujral Design Overseas pvt Ltd 1 INCOME TAX DEPARTMENT DSR item code S No. Description Of Item Unit B Block D Block E2 Block Total Floors RATE AMOUNT PART A-FLOORING & DADO WORKS Note: For all item of stone and tile the contractors should see the approved sample board at the office of the architect and should also submit their own sample alongwith the tender. 1 Stone Flooring Providing and fixing 18mm thick pre-polished stone of approved quality (sample of marble shall be approved by Engineer-in-charge) in specified size of stone slab as per drawings on floor and laid over 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) mix, including cutting of stone, white cement slurry, matching pigment,chamfering if any, horizontal jointings, final polishing as required etc. complete as per design and drawing. i Polished Granite Stone flooring (basic rate of stone Rs. 110 / sqft)Including all taxes & tranportation ) sqm 15 15 50 80.0 3144 251,488.00 ii Polished Granite Stone flooring (basic rate of stone Rs. 150 / sqft)Including all taxes & tranportation ) to match the existing stone installed at site. sqm 25 25 200 250.0 3686 921,400.00 iii A class Italian Marble Stone Flooring (basic rate of stone Rs 300 / sqft) Cost to include appropriate coating of Latecrete make under the stone and at joints and top surface, all taxes & tranportation ) Proposed stone( perlato cicilia) sqm 650 500 2400 3550.0 6504 23,089,200.00 iv A class Italian Marble Stone Flooring (basic rate of stone Rs 450 / sqft) Cost to include appropriate coating of Latecrete make under the stone and at joints and top surface, all taxes & tranportation ) sqm 50 45 200 295.0 8672 2,558,240.00 v Polished Kota Stone Flooring. sqm 50 50 300 400.0 850 340,000.00 2 Stone Skirting and dado Providing and laying skirting and dado in stone in 12 mm average thick cement mortar 1:3 (1 cement : 3 coarse sand) jointed cement slurry mixed with pigment to match the shade of slab including chamfering, corner/ edge grinding complete as per specification, pattern and drawing. i Polished Granite Stone Skirting and cladding including ss clamps for cladding above 1 meter (basic rate of stone Rs. 110 / sqft)Including all taxes & tranportation ) sqm 1.5 1.5 5 8.0 3400 27,200.00 ii Polished Granite Stone Skirting and cladding including ss clamps for cladding above 1 meter (basic rate of stone Rs. 150 / sqft)Including all taxes & tranportation ) sqm 2.5 2.5 20 25.0 3900 97,500.00 iii A class Italian Marble Stone Skirting and cladding including ss clamps for cladding above 1 meter (basic rate of stone Rs 300 / sqft) Cost to include appropriate coating of Latecrete make under the stone and at joints and top surface, all taxes & tranportation ) sqm 65 50 240 355.0 7000 2,485,000.00 iv A class Italian Marble Stone Skirting and cladding including ss clamps for cladding above 1 meter (basic rate of stone Rs 450 / sqft) Cost to include appropriate coating of Latecrete make under the stone and at joints and top surface, all taxes & tranportation ) sqm 5 4.5 20 29.5 9000 265,500.00 v Polished Kota Stone skirting sqm 5 5 30 40.0 850 34,000.00 MR ESTIMATE Design Plus A unit of Gujral Design Overseas Pvt Ltd 1 INCOME TAX DEPARTMENT DSR item code S No. Description Of Item Unit B Block D Block E2 Block Total Floors RATE AMOUNT 3 Staircase flooring Providing and laying stone in specified size (in single piece) of stone slab in treads and risers of steps as per design and pattern shown in drawings laid over 20mm average thick cement morter 1:3 (1 cement : 3 coarse sand) jointed with cement slurry mixed with pigment to match the shade of slab including rounded moulding, chamfering, corner /edge grinding and mirror polishing, making nosing as per profile in steps, rubbing and mirror polishing, drilling holes and grouting for fixing of staircase railing etc. complete as per specification and drawing. 3.1 Treads of steps With 18 mmthick Prepolished Granite stone and joint to be filled with white cement slurry mixed with pigment to match the shade of stone including exposed edge polishing, complete. (Basic rate of prepolished stone Rs. 140/- per Sqft) sqm 50 50 100 200.0 3577 715,440.00 3.2 Risers of step. With 18 mm thick Prepolished Granite stone and joint to be filled with white cement slurry mixed with pigment to match the shade of stone including exposed edge polishing, complete. (Basic rate of prepolished stone Rs. 140/- per Sqft) sqm 25 25 50 100.0 3252 325,200.00 4.00 Stone Cladding Providing and fixing prepolished stone cladding in specified sizes as per drawing laid with 15 mm avg. thickness of cement mortar 1:3 mixed with waterproofing compound (1cement : 3 coarse sand) wet cladding. The item includes providing and fixing stainless steel cramp of adequate size & design fixed in cladding as per design, joints sealed with silicon sealent, pins, dash fastener of approved make and fixing grit on back of stone with araldite etc including filling the joints with white cement with matching pigment, chamfering, making grooves, pointing, edge polishing, scaffolding, curing etc. complete including matt finish silicon coating etc. complete as per design & drawing. i Granite Stone (basic rate of stone Rs. 140 / sqft. Including all taxes & tranportation ) sqm 50 50 50 150.0 3900 585,000.00 ii Itlian Marble Stone (basic rate of stone Rs 400 / sqft. Including all taxes & tranportation ) sqm 50 50 100 200.0 9000 1,800,000.00 Design Plus A unit of Gujral Design Overseas Pvt Ltd 2 INCOME TAX DEPARTMENT DSR item code S No. Description Of Item Unit B Block D Block E2 Block Total Floors RATE AMOUNT 5.00 Toilet Counter i Providing and fixing single piece prepolished 18mm to 20mm thick Granite Stone on counter top and facia and laid over 12mm thick cement mortar 1:4 (1 cement : 4 coarse sand) mix including cutting of granite in proper shape & size, white cement slurry, matching pigment, making hole for wash basin,mixer & sink with edge polishing of cut edges, rouding of edges, chamfering of edges, additional piece stuck with araldite at bottom ( if desired), silicon sealent as required etc. complete as per design and drawing. (basic price Rs. 180 /sft) sqm 10 10 20 40.0 4336 173,440.00 ii Samsung Staron counter Providing and fixing single piece acrylic surface( Samsung staron) top 10mm to 12mm thick on counter top and facia and laid over 12mm thick marine ply including cutting of staron in proper shape & size, making hole for wash basin,mixer & sink with edge profile as edesired by architect. fixig with approved adhesive to be part of the quoted cost etc. complete as per design and drawing. (base rate for staron 650 per sq.mt sanded grey) sqm 10 10 60 80.0 13000 1,040,000.00 6.00 Granite Stone On Jamb & Ledge Providing and fixing 18mm to 20mm thick pre-polished granite stone on jamb & ledge and laid over 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) mix, including cutting of stone,chamfering, edge polishing, white cement slurry, matching pigment, silicon sealents etc. complete as per design and drawing. (basic price Rs. 140 /sft) i For jamb with polished edges sqm 10 10 60 80.0 3472 277,760.00 ii For ledge with polished edges sqm 15 15 60 90.0 3252 292,680.00 Design Plus A unit of Gujral Design Overseas Pvt Ltd 3 INCOME TAX DEPARTMENT DSR item code S No. Description Of Item Unit B Block D Block E2 Block Total Floors RATE AMOUNT 7.00 Vitrified Tile Flooring & Skirting Providing and laying 9.5 mm thick vitrified tiles of approved quality and shade for flooring & skirting over a bed of 20mm thick cement mortar 1:4 (icement : 4 coarse sand) , laid to patterns without but joint grooves , including necessary cutting, mitring, grouting of joints with applying silicon sealents between the junction of floor & wall, etc., complete as per detailed drawings at all levels. i Polished Vitrified tile (basic price Rs. 65/sft)Prefered makes Kajaria Eternity series or equavalent with prior approval of the of engineer in charge. sqm 100 100 100 300.0 1626 487,800.00 ii Polished Vitrified tile (basic price Rs. 80/sft)Prefered makes Kajaria Eternity series or equavalent with prior approval of the of engineer in charge. sqm 3400 3600 17900 24900.0 1886 46,965,384.00 iii Polished Vitrified tile (basic price Rs. 150/sft)Prefered makes Kajaria world or equavalent with prior approval of the of engineer in charge. sqm 50 50 1000 1100.0 2700 2,970,000.00 8.00 Vitrified Tile Dado Providing and laying 9.5 mm thick vitrified tiles of approved quality and shade for dado over a bed of 12mm thick cement mortar 1:4 (icement : 4 coarse sand) , laid to patterns with 2-3 mm grooves , including necessary cutting, mitring, grouting of joints with 'BAL' epoxy based grout (grey) / white antifungal grout applying silicon sealents between the junction of floor & wall, etc., complete as per detailed drawings at all levels. i Polished Vitrified tile (basic price Rs. 65/sft)Prefered makes Kajaria Eternity series or equavalent with prior approval of the of engineer in charge. sqm - ii Polished Vitrified tile (basic price Rs. 80/sft)Prefered makes Kajaria Eternity series or equavalent with prior approval of the of engineer in charge. sqm 50 50 100 200.0 1886 377,232.00 iii Polished Vitrified tile (basic price Rs. 150/sft)Prefered makes Kajaria world or equavalent with prior approval of the of engineer in charge. sqm 10 10 20 40.0 2700 108,000.00 9.00 Raised Floor P/F false flooring comprising of 25mm diameter mild steel stud shall be threaded, with a nut and check nut 6mm. Mild steel base plate placed at all junctions of the panels approximately at 1.3. Center. Top head attachment of the pedestals pressure die-cast aluminum alloy class LM6. Stringers made of cold rolled mild steel channels of size 40mm x 40mm x 3mm placed over top head attachment of pedestals. The stringers shall be zinc electroplated to a minimum thickness of 15microns. Panels manufactured from steel with lightweight cementious core in the size 600 X 600 X 35 mm. Design Plus A unit of Gujral Design Overseas Pvt Ltd 4 INCOME TAX DEPARTMENT DSR item code S No. Description Of Item Unit B Block D Block E2 Block Total Floors RATE AMOUNT The floor panels shall have Access Managers and openings of sizes as per IT requirement. 2mm thick high pressure decorative laminated sheet, anti-static fire- retarted and abrasion resistant quality (flooring grade formica, Durosurt of equivalent as approved of required shade, fixed to the top of particle board floor panels with adhesive of approved quality and machine pressed includes cost of providing holes and openings. 3mmthick hard P.V.C beading, G.I. Sheet to the bottom surface and sides of the floor panels and aluminum cleats of size 20x20x2mm screwed to the bottom of floor panels. Included in this itemis cutting of holes/ openings with special cutter to achieve a seam less edge and also supply of vacuum pull. Height of false Floor is: i 450mm( preferred make: UNITILE or equavalent with prior approval of engineer incharge.) Sqm 25 25 25 75.0 4,500.00 337,500.00 ii 300mm( preferred make: UNITILE or equavalent with prior approval of engineer incharge.) Sqm 15 15 15 45.0 4,200.00 189,000.00 10.00 Aluminium Skirting Supply & Installation of proprietry Anodised Aluminium Skirting of matt Natural finish of aluminium alloy 6063 T5 manufactured from recycled aluminium billets. Anodizing shall be 10-15um (microns) depending on the colour selected for of 50mm high skirting. The cover be Grey PVC with PVC corner stakes for connecting the skirting at corners & wall ends.( preferred make: JEB or equavalent with prior approval of engineer incharge.) RMT 100 100 500 700.0 543 379,750.00 11.00 Laminated Skirting Providing and fixing laminated skirting(100 to 150mm high) on wall and partitions and made of 1.0mm thick laminate cladded over 12mm thick BWP ply fixed to wall with wooden plugs including all necessary nails, glues, wood preservative paint,etc. complete as per design and drawing. RMT 950 1000 5000 6950.0 326 2,262,225.00 12.00 Solid Wooden Flooring Providing and fixing of 15mmsolid hard wood flooring of approved brand make, consisting total of 3 wood layers. Top layer of precious wood in 3.6mm having 6 coats of Uvdried surface treatment, middle layer of spruce/ pine wood finger chips ie, laid perpendicular to the top layer and bottom layer of spruce veneer for balancing and stability. Having width 250mm, length 2200mm with click - connect (glue-less) technology. Fixing by providing 3mm of polyurethane foam & 0.5mm of polythene sheet underneath the flooring. sqm 25 50 75.0 5425.00 406,875.00 13.00 Laminated wooden flooring Providing and laying laminated wooden flooring of approved make ( sharper image) make and as per approved sample, colour and laid on the existing levelled flooring with approved adhesive & underlay including skirting beading & profile etc. complete as per manufacturers specification & approval of Architect (basic rate to be considered @ Rs. 1700/- sft.). sqm 50 50 100 200.0 2400 480,000.00 14.00 Antistatic Vinyl Flooring Providing and laying in position 2mm thick antistatic vinyl tile flooring of approved shade and quality to floor with adhesives, including thermo welding of joints etc. complete as per manufacturer's specifications. Cost of levelling as required to be included in the quoted rate. sqm 60 60 240 360.0 1200 432,000.00 Design Plus A unit of Gujral Design Overseas Pvt Ltd 5 INCOME TAX DEPARTMENT DSR item code S No. Description Of Item Unit B Block D Block E2 Block Total Floors RATE AMOUNT 15.00 P/P black or white round(nominal size:20-25mm) polished river pebbles in floor recesses locations, so as to achieve a uniform distribution in locations as per design. KG 200 200 600 1000.0 200 200,000.00 16.00 Ceramic Tile Dado Providing and laying 6 mm thick ceramic tiles of approved quality and shade for dado over a bed of 12mm thick cement mortar 1:4 (icement : 4 coarse sand) , laid to patterns without grooves , including necessary cutting, mitring, grouting of joints applying silicon sealents between the junction of floor & wall, etc., complete as per detailed drawings at all levels. i ceramic tile (basic price Rs. 40/sft) sqm 150 150 300 600.0 950 570,000.00 Total 91,444,814.00 2.0 PART B-FALSE CEILING WORKS General: Under this subhead,all the seen surfaces shall be measured and paid for. 2.10 Providing & fixing grid ceiling with high density / fire resistant Mineral wool accoustical Ceiling tiles tegular edge of 14mm thick and fine bevelled edge with NRC not less than 0.65. The tile shall be of size 600 x 600 x14mm. The ceiling shall be suspended with suspension system, using high quality galvanised steel frames comprising of powder coated main runner, cross Tee's & edge frames suspended from ceiling using high strength anchor bolts for hanger hooks holding the frame. Humidity resistance up to 90 %, relative humidity (90 RH) ,Reaction to Fire Class O Approved document B Building Regulations ,A2-s1,d0 EN 13501-1 1 hour fire protection to BS 476 part 23 ,Up to REI 90 EN 13501-2 Good acoustic absorption Thickness 14 mm nom. Light reflection approx. 88 (ISO 7724-2, ISO 7724-3) Sound reduction* 30 dB Coefficient of thermal conductivity should be 0,063 W/mK Mineral wool should be derived from a mixture of sand, recycled glass and limestone. This mineral wool product should be completely harmless to health - and fulfils all national and international regulations. Only natural pigments should be used in the paint coating of Acoustic tiles - a solvent-free dispersion type paint should be used. The suspension construction should consists of zinc galvanized sheet steel. Visible sides are standard white coated. Other colours on request. Weight (according to system): approximately 1.5 to 3.0 kg/m Regulations for the entire weight-bearing building component: Soffit + suspended ceiling, fire resistance of 30 to 120 min. (F 30 to F 120 also REI 30 up to REI 120.) Requirement for the suspended ceiling alone: Self contained fire protection (from above and below) fire resistance of 30 to 90 min. (EI 30 and F 30 to F 90). Design Plus A unit of Gujral Design Overseas Pvt Ltd 6 INCOME TAX DEPARTMENT DSR item code S No. Description Of Item Unit B Block D Block E2 Block Total Floors RATE AMOUNT Galvanized support system- and sillohoute grid system consisting of main tee 3000mmx15mmx34mm & perimeter angle- suitable to form a matrix of 600x600mm.Tee cap shall be bake enameled and of 12mm face width .These Tiles are in White Colour. Note: Total area shall be taken under the Ceiling including Lights and Diffusers shall be taken for measurements.preferred Brand :OWA, ARMSTRONG or equalvalent with prior approval of engineer in chief. Sqm 2568 2450 11500 16518.0 868.00 14,337,624.00 2.20 Providing and fixing in position Suspended ceiling System with microlook edge wood veneer finish ceiling tiles in size 600 x 600 x 15 mm laid on Suprafine 15mm Galvanised grid support system-consisting of main tee 3000mmx15mmx34mm 7 parimeter angle- suitable to form a matrix of 600x600mm.Tee cap shall be bake enamelled and of 15mm face width .Suggested Brand : Armstrong, OWA , AMF microlook perforated A1, in beech or maple as per approval or equv, & Suprafine 15mm grid. Note: Total area shall be taken under the Ceiling including Lights and Diffusers shall be taken for measurements. Sqm 70 35 185 290.0 3255.00 943,950.00 2.30 Providing and fixing Veneered wooden lattice Ceiling comprising of beams ( upto 50x150 size crossection) at upto 300mm c/c made with 19mm th. Comm. board as base and 4mm th. walnut veneered ply as the finishing layer comlete with all edges having suitable lippings etc. complete. The surface will be melamine polished as/app.with grooves as/det. Sqm 50 50 100 200.0 4000.00 800,000.00 2.40 Providing and fixing Veneered Ceiling comprising of necessary framework of well seasoned Hard wood / Board / MS box sections with 6mm th. Comm. Ply as base and 4mm th. Steam Beech/AM maple veneered ply as the finishing layer complete with all edges having suitable lippings etc. complete. The surface will be melamine polished as/app. with grooves as/det. Provision for cove/surface lights will have to be kept .This Ceiling will be in following two profiles : I Flat profile Ceiling hanging below the main Tile Ceiling. sqm. 25 125 150.0 3440.00 516,000.00 2.50 Providing and fixing 'SOLATON' Double Layer Ceiling System , using existing Gyp board ceiling as first layer & using 12 mm thk SOLATON Ceiling Board (SC-15-12T) as second layer fixed to eac other with the help of Adhesive & staples as per manufacturer's spec. Suggested Brand: Solution from NITTOBO or equavalent but with the prior approval of the engineer in charge of the project. sqm. 50 50 300 400.0 1500.00 600,000.00 2.60 Providing and fixing the 'Axiom' perimeter trim in following sizes in white colour, baked polyester paint finish, fixed to grid main runner with the help of Axiom profile T-bar connector clip. The Axiom profile shall be of extruded aluminium alloy 6063 and T-bar connector clip from commercial aluminium complete as per manufactutuer specifications and details and drawings. Suggested Brand : Axiom Perimeter Trim from Armstrong. i 100mm x 19mm Rmt 50 50 100 200.0 538 107,500.00 Design Plus A unit of Gujral Design Overseas Pvt Ltd 7 INCOME TAX DEPARTMENT DSR item code S No. Description Of Item Unit B Block D Block E2 Block Total Floors RATE AMOUNT 2.70 P/F Window Pelmets made out of 19mm Comm Board in L- profile fixed to RCC slab with dash fasteners/ adequate hard wood framings . Cost to include painting this with white flat paint. Average size : 200 x 450. Complete as per design and drawing. Rmt 550 550 2150 3250.0 600.00 1,950,000.00 2.80 Providing and fixing Trap Door in false ceiling, made of 12mm thick B.W.P. grade ply wood resting / fixed / hinged on 12mm x 18mm size wood frame all round, 1.0mm thick laminate on exposed surfaces of ply wood, enamel painting on unexposed surfaces, including all hardware, hinges, wood lipping etc. complete as per design and drawing. sqm 60 60 180 300.0 2500.00 750,000.00 2.90 Providing and fixing 200 x 225 x 100mm (front height) cove made of gypsum/ pop cove as per drawing in for lighting cove complete with necessary cut-outs for services out lets. Rm 500 600 3000 4100.0 300.00 1,230,000.00 Total 21,235,074.00 3.00 PART C- PARTITION & PANELING General, and mandatory :- 1. The GI frame work in partition to have verticals as required and as per Manuf.'s specs. And horizontals at every 1200 mm c/c or as per the Pattern of grooves whichever is less . Cost of partitions to include insertion of necessary wooden members at skirting level or elsewhere as deemed fit by him. 2. At all services out lets such as switch sockets, data out lets,AC grills, etc. Horz. member of adequate size and section to be provided. 3. All full ht. partitions ,unless otherwise specified will go upto RCC slab,complete with insulation , Gyp. Board etc. Actual Area executed will be paid for. 4. All exposed wooden surfaces in this Item or anywhere else in the BOQ to have melamine polish as per approved sample 5. All wooden/mdf framework under this item or anywhere else in the BOQ to be treated with anti termite and fire retardant paint ( viper or equv.) 6. All the wooden framework under this Item or anywhere else in the BOQ will have well seasoned wooden members of species as defined in the individual item. 7. All Glass to Glass, Glass to wood and Glass to SS joints shall be sealed with Dow Corning Glass sealent with minimum contact surface to be not less than 6mm after cleaning and masking procedure with full tool & tackle .Silicon works to be got done by an approved specialized Agency. Design Plus A unit of Gujral Design Overseas Pvt Ltd 8 INCOME TAX DEPARTMENT DSR item code S No. Description Of Item Unit B Block D Block E2 Block Total Floors RATE AMOUNT 3.1 P/F G.I Frame for Partitions consisting of G.I vertical studs of size 50mm & horizontal members where ever required as per manufacturer,s specs, using Gypsteel sections, hardwood will be inserted as may be required to fix door frames skirtinf etc. Quote only for framework. All components to be of saint gobin India Gypsum/ boral Sqm 200.00 200.00 1,200.00 1600.0 434.00 694,400.00 3.2 P/F G.I Frame for Panelling consisting of G.I vertical studs of size 75 mm & horizontal members where ever required as per manufacturer,s specs, using Gypsteel sections, hardwood will be inserted as may be required to fix door frames skirting etc. Quote only for framework. All components to be of saint gobin India Gypsum/ boral sqm 950.00 990.00 2,400.00 4340.0 488.25 2,119,005.00 3.3 Providing and fixing kail wood frame in curved or straight profile for partition work of section 50 mm x 50 mm with anti-termite and fire retardant paint. Sqm 100.00 100.00 300.00 500.0 596.75 298,375.00 3.4 Skins over partitions and penelling Note :- 1) All grooves unless otherwise specified shall be 10mm wide with laminate at the back. 2) The exposed edges of all Skin Types will be edge bound with suitable laminate/veneer/wood etc. as per Architects' directions. 3) All Gypsum boards shall have Al. angle / MDF beading on the edges. 4) All Glass to Glass, Glass to metal/ wood joints shall have Dow Corning silicon seal done by approved Applicator as per manufacturer's Specs. 3.4.1 Providing and fixing 12mm thick MDF Board fixed over GI Partition / kail wood frame with screws at 300mm centre to centre or approved desh fastners as required, jointed and finished so as to have a flush look which includes filling and finishing with putty and two coats of primer suitable to receive wall paper / paint etc. complete as per design & drawing. Sqm. 400.00 400.00 1,500.00 2300.0 967.50 2,225,250.00 3.4.2 Providing and fixing 6mm thick commercial ply fixed over GI Partition / kail wood frame with screws at 300mm centre to centre or approved desh fastners as required, jointed and finished so as to have a flush look which includes filling and finishing with putty and two coats of primer suitable to receive wall paper / paint etc. complete as per design & drawing. Sqm. 100.00 100.00 500.00 700.0 645.00 451,500.00 3.4.3 P/F Skin type of Gypsum board skin with 12mm grooves complete with angle beadings & paper tape as/manuf. Specs. . 12.5mm tapered edge gypsum plaster board fixed to the channels (behind single layer of gypsum board)with dry wall screws, jointed and finished with requisite filler, paper tape, finisher and and primer suitable for gypsum plaster boards. The outer skin shall have 12mm grooves with aluminum 'L' angle bends fixed to the thickness of board at the edges, neatly finished. All components to be of India Gypsum. Sqm. 1,600.00 1,500.00 5,500.00 8600.0 379.75 3,265,850.00 Design Plus A unit of Gujral Design Overseas Pvt Ltd 9 INCOME TAX DEPARTMENT DSR item code S No. Description Of Item Unit B Block D Block E2 Block Total Floors RATE AMOUNT 3.4.4 P/F Skin type of 8mm thick MDF Board Skin fixed in straight or curved profile to the sub surface with 10mm grooves. This layer should be make veneer/ dinoc film base skin base. Sqm. 400.00 130.00 1,950.00 2480.0 645.00 1,599,600.00 3.4.5 P/F Skin type of 12 th MDF Board Skin fixed in straight or curved profile to the sub surface with 10mm grooves. This will duco painted in matt finish. Sqm. 55.00 20.00 200.00 275.0 989.00 271,975.00 3.5 Veneer Paneling I Providing and fixing 4.0 mm thick wood veneer of approved quality in panelling pasted over 9mm thick commercial ply and fixed on GI frame work of partitions (GI frame work payable separately) including providing and fixing all around White Oak wood moulding of required size, grooves, melamine polishing, making grooves etc. complete as per design and drawing . Sqm 25 100 125.0 2,902.50 362,812.50 II Providing and fixing panelling on brick wall with approved 4.0mm thick wood veneer having 9 mm thick commercial ply backing with internal soft wood frame of adequate and approved section and size placed at 600 mm centre to centre bothways, treated with antitermite and fire retardent paint including grooves,melamine polished etc. complete as per design and drawing. Sqm 50 100 150.0 3,225.00 483,750.00 3.6 Laminate Panelling i Providing and fixing 1.0 mm thick laminate of approved quality in panelling pasted over 3mm thick commercial ply pasted over 9mm thick commercial ply and fixed on GI frame work of partitions (GI frame work payable separately) including providing and fixing all around melamine polished OAK wood moulding of required size, grooves, complete as per design and drawing . sqm 200 200 800 1200.0 2,042.50 2,451,000.00 ii Laminated Band. Providing and fixing laminated band made of 12mm thick BWP ply cladded with 1.0mm thick laminate of approved shade with 12mm x 12mm deep groove finished with laminate fixed to wall / wooden / GI Partition including necessary nails & screws / wooden plugs, glues, insulation wherever required, melamine polished, wood preservative paint etc. complete as per design and drawing.150mm high RMT 30 30 200 260.0 268.75 69,875.00 iii Providing and fixing panelling on brick wall with approved 1.0 mm thick laminate of approved quality in panelling pasted over 3mm thick commercial ply pasted over 9mm thick commercial ply with internal soft wood frame of adequate and approved section and size placed at 600 mm centre to centre bothways treated with antitermite and fire retardent paint including grooves, white Oak wood moulding etc. complete as per design and drawing. sqm 400 400 2000 2800.0 2,257.50 6,321,000.00 iv Extra over item 3.9 (i), (ii), ( iii). for providing and making 10mm x 10 mm steel laminate grooves in panelling as per approved design & drawing. Sqm 50 300 350.0 450 157,500.00 Design Plus A unit of Gujral Design Overseas Pvt Ltd 10 INCOME TAX DEPARTMENT DSR item code S No. Description Of Item Unit B Block D Block E2 Block Total Floors RATE AMOUNT 3.7 P/F Skin type - Fabric Covered Pin Board made with 12mm thick Sitatex Pin board covered with Fabric. This skin will be attached to the partition .The Fabric range will be of with basic rate of being Rs300/- per mtr. Suggested brand: Response/ Atmosphere Sqm. 50.00 50.00 200.00 300.0 1,612.50 483,750.00 3.8 P/F 12mm thk untoughened glass fixed with SS U channel at bottom of floor and inside the ceiling as per manufacturers specification all complete as per design and drawing Sqm. 10.00 10.00 100.00 120.0 2,687.50 322,500.00 3.9 P/F 10mm thk toughened glass panels fixed with SS U channel at bottom of floor and inside the ceiling as per manufacturers specification all complete as per design and drawing Sqm. 10.00 10.00 100.00 120.0 3,225.00 387,000.00 3.10 P/F Glass Writing Board made of Untoughened 12 thk glass panel with 3M opaque white film from rear for writing board fixed to the partition with 25mm dia SS studs .Cost to include the necessary wooden members required in the GI Framework to fix this Glass Writing Board. Sqm. 10.00 10.00 100.00 120.0 3,225.00 387,000.00 3.11 Providing & fixing Modular Ceiling/Wall Cladding System 'Topakustic' from Fantoni, over existing gypsum/wall substrate/hanging from ceiling as per pattern, drawings and architect's approval. The panels being made of grooved MDF slat with low formaldehyde content E1. Application of black sound absorbent felt on the rear of slats, thickness 0.25 mm - weigh 65 gr/m2. The installation has to be made with an under supporting structure, composed by an omega steel profile, sizes mm 18 x 27 and the proper steel locking clips of mm 44 x 38. The rate to include cost of necessary Grid & support system like end profiles, fixing channels, clips, complete, which are necessary for installation. The rate to include cost of transportation, shifting & fixing charges. preferred Brand :Fantoni or equalvalent with prior approval of engineer in chief. Walls Sqm. 50.00 25.00 200.00 275.0 9,000.00 2,475,000.00 Ceilling Sqm. 25.00 25.00 50.00 100.0 10,000.00 1,000,000.00 3.12 P/F filmon glass panels as per pattern / design ( this can be in a combination of opaque coloured and frosted films as/ design) preferred Brand :Fasarra from 3M or equalvalent with prior approval of engineer in chief. translucent film approved Design Sqm. 320.00 300.00 1,500.00 2120.0 2,500.00 5,300,000.00 opaque white filim Sqm. 25.00 25.00 100.00 150.0 2,000.00 300,000.00 3.13 P/F filmon glass panels as per pattern / design ( this can be in a combination of opaque coloured and frosted films as/ design) preferred Brand :frosted film 3M or equalvalent with prior approval of engineer in chief. Sqm. 25.00 50.00 100.00 175.0 1,600.00 280,000.00 3.14 P/F printed graphics film for pasting directly on walls/partitions. Cost to include the nominal designing charges preferred Brand :3M ControltacPlus Graphic Film with Comply : IJ180C-10 or equalvalent with prior approval of engineer in chief. Sqm. 60.00 40.00 200.00 300.0 3,500.00 1,050,000.00 3.15 P/F Vinyl wall papers pasted with appr. Adhesive solution without any bubbles or unevenness over wall/partitions as /design. Suggested brand: Vescom/ Arte or equalvalent with prior approval of engineer in chief.(Basic rate:upto 100/= per sq ft) Sqm. 200.00 200.00 1,000.00 1400.0 1,519.00 2,126,600.00 Design Plus A unit of Gujral Design Overseas Pvt Ltd 11 INCOME TAX DEPARTMENT DSR item code S No. Description Of Item Unit B Block D Block E2 Block Total Floors RATE AMOUNT 3.16 Providing and placing 50 mm thick glass wool insulation of 48 kg/ cum. density neatly packed in 800 micron black colour polythene bags of various sizes and shapes,bags shall be fully stitched all round with25 mm double leaf fold, sealing the rock wool fibre fully. The bags to be stuffed in the cavities of Gyp. partitions from floor up to RCC slab above, cross stitched from one side with GI frame work of partition by 24 g GI wire to keep bags in possession. Suggested Brand : Rocklloyd or equalvalent with prior approval of engineer in chief. sqm 1,000.00 1,000.00 3,500.00 5500.0 325.50 1,790,250.00 3.17 P/F glass panelling consisting of 6mm thk untoughen glass panel,( paint back) & 50x25 mm box section fixed to the sub surface with dash fasteners, cost include application of white silicon to be used to fill gaps and sticking of glass to box section with norton tape. Glass to glass edges to be grinded and polished to achieve a seamless finish. Suggested Brand : Saint Gobain SGG Planilaque Evolution or equalvalent with prior approval of engineer in chief. Extra White & Ivory sqm 20.00 20.00 100.00 140.0 3,146.50 440,510.00 Solar Yellow sqm 10.00 10.00 40.00 60.0 3,146.50 188,790.00 3.18 P/F Mirror panelling , 5mm thk in same specs as above item. sqm 6.00 4.00 10.00 20.0 2,604.00 52,080.00 3.19 Supply & Installation of Solid Modular partition 100mm thick.100mm De-mountable Partition System that is designed to provide office space in an open plan environment and the ability to modify or reconfigure this space to meet changing office requirements. System description System to be fully bi-block system made of galvanised steel and aluminium components, with a flush pencil- joint or 5mm groove connection between the modules. The system is for interior wall applications and it is fully de-mountable and re-locatable. All visible components are finished with high quality polyester epoxy powder coating, smooth or soft touch textured within RAL colour collection. Being a Bi-block system String provides the accessibility for power, communication and data wiring services even after the installation. String partition is 100mm thick, non- load bearing, the modules are full height elements. Standardised modules of steel panels, wooden panels, glazed panels and door units can be arranged in almost any desirable combination within given wall space. Ceiling track: U-channel profile of 1.5mm thick galvanised steel, recessed 13.5mm behind face of panel. Ceiling track is visible and it is coated with epoxy powder. It is 13mm adjustable to variation of ceiling level and provided with dual compression seals for continuous light and sound seal. Floor track; U-channel profile of 1.5mm thick galvanised steel, recessed 23mm behind face of panel. Floor track is visible and it is coated with epoxy powder. It is used in combination with an adjustable floor track, which will be not visible. This adjustable floor track will level the system and provide 13mm adjustment in the height. The floor track is provided with dual compression seals for continuous light and sound seal. Design Plus A unit of Gujral Design Overseas Pvt Ltd 12 INCOME TAX DEPARTMENT DSR item code S No. Description Of Item Unit B Block D Block E2 Block Total Floors RATE AMOUNT Construction: Galvanised clamping studs for solid module connections and unique (patented) twist connectors for frame-frame and solid-frame connections Insulation material: 50 mm thick Rock wool with a density of 48kg/m3 shall be placed in the cavity of the solid modules during installation. Sound insulation: Following units have been tested by an approved independent testing laboratory in accordance with ISO 717, leading to following results: up to Rw 47dB for solid steel modules, up to 42 dB for solid wood modules & up to Rw 42 dB for glazed modules. Fire resistance: The solid modules have been tested by an approved independent testing laboratory in accordance with Clause 5 of BS 476 part 22, leading to following results: Standard up to 30minutes in Steel panels & wooden chipboard panels with melamine finish Integrity up to 70 minutes in Steel panels Insulation up to 63 minutes in Steel panels Suggested Brand : MAARS or equalvalent with prior approval of engineer in chief. FINISH a On both sides with factory assembled wooden panels 18mm thick with Ash Wood Wall Nut Laminate/Wall paper Finish. Max. dimensions 1200mm width by 2400mm height. sqmt 500.00 500.00 4,500.00 5500.0 8,410.00 46,255,000.00 b On both sides with factory assembled wooden panels 18mm thick with Veneer Finish. Max. dimensions 1200mm width by 2400mm height. sqmt 80.00 500.00 580.0 9,000.00 5,220,000.00 3.20 Providing and fixing wooden cill / jamb made of 4mm thick White Oak wood veneer/1.0mm thick laminate cladded on 19mm thick BWP ply fixed to wall with necessary nails/wooden plugs including all nails White Oak wood wood lipping, melamine polishing, wood preservative paint, White Oak wood architrave on both faces etc. complete as per design and drawing. i Laminated sqm 25 25 125 175.0 2170 379,750.00 ii Veneered sqm 5 5 10 20.0 3472 69,440.00 Total 89,279,562.50 4.00 PART D-DOORS AND WINDOWS. 4.10 Door Frame Providing, making and fixing in position selected woods in frames, transoms, mullions, cills, etc., of doors, windows, made to size and shape as shown, with mitered joints, fixed with holdfasts/cleats / threaded expansion bolts to rough grounds / masonry including making 10mm thick grooves with laminate finished etc. including two coats of fire retardant (viper) & anti- termite paint on concealed surfaces, rebates for locks, hinges, metalic fasteners,CC for hold fasts, melamine polishing etc., complete as per detailed drawings. i First class kiln dried Melamine polished White Oak. cum 1 1 2 4.0 86800 347,200.00 ii First class hollock wood synthatic enamel paint. cum 1 1 2 4.0 54250 217,000.00 4.20 Architrave Providing and fixing Ist class White Oak wood architrave of size 50mm x 20mm and fixed with nails / wooden plugs including nails, screws, melamine polishing,fire retardant (viper) & anti-termite paint on concealed surfaces, etc. complete as per design and drawing. mtr. 500 500 2000 3000.0 271 813,750.00 Design Plus A unit of Gujral Design Overseas Pvt Ltd 13 INCOME TAX DEPARTMENT DSR item code S No. Description Of Item Unit B Block D Block E2 Block Total Floors RATE AMOUNT 4.30 Flush Door Shutters Design Plus A unit of Gujral Design Overseas Pvt Ltd 14 INCOME TAX DEPARTMENT DSR item code S No. Description Of Item Unit B Block D Block E2 Block Total Floors RATE AMOUNT Providing and fixing 35mm thick (shutter thickness excluding laminate / veneer ) both side commercial type flush door shutters (decorative type) core of block board construction and frame of 1st class hardwood phenol bonded, White Oak wood lipping 12mm thick on all edges of shutters including brushed steel heavy duty 125mm hinges (4 nos.), PVC buffers, door stopers, melamine polishing to required shade where required etc. all complete as per design and drawing. I Both side laminated with 1.0mm thick laminate. (FD- 1,2,3,4) sqm 60 60 360 480.0 3255 1,562,400.00 III One side veneered with 4.0mm thick White Oak wood veneer and other side laminated with 1.0mm thick laminate. sqm 15 8 55 78.0 3798 296,205.00 IV Both side veneered with 4.0mm thick White Oak wood veneer. (FD-2A) sqm 20 10 60 90.0 4340 390,600.00 4.40 Vision Panel Providing and fixing vision panel on flush door shutter including cutting of shutter, 6mm thick glass, White Oak wood beading fromboth faces, melamine polishing etc complete as per design and drawing. sqm 5 5 25 35.0 2007 70,253.75 4.50 Fixed Glazing WIDELINE MODULAR ALUMINIUM PARTITION SYSTEMS (105x25mm) i Supply & Installation of proprietry Anodised Aluminium partition systems of matt Natural finish of aluminium alloy 6063 T5 manufactured from recycled aluminium billets. Anodizing shall be 10-15um (microns) depending on the colour selected of 105 x 25mm thk section on all four sides for the partition using as Horizontals on top & as verticals , as Horizontals at bottom with snap on option for installing glass and other required accessories.The partition should beavailable for usewith a partitionusinga 51 mm or 64 mm studframe .Comprised of 105 mmx 25 mmframework, the system should produce a selection of complete prefinisheddoor frames aswell as glass and door opening reveals, 5 mm architraves for termination of adjacent skirting and can accept glass of 10mm thick.From FFL to +2400mm THE RATE TO INCLUDE THE COST OF 10MM TOUGHENED GLASS. Suggested Brand : JEB , ALLOY Systems or equalvalent with prior approval of engineer in chief. Sqm 500 500 2200 3200.0 6510 20,832,000.00 Design Plus A unit of Gujral Design Overseas Pvt Ltd 15 INCOME TAX DEPARTMENT DSR item code S No. Description Of Item Unit B Block D Block E2 Block Total Floors RATE AMOUNT ii Item same as above 4.5(i) of fixed glazing but for using hard wood frame above falseceiling for fixing glass on top & aluminum channel in floor instead of providing Oak wood frame including silicon sealent, hard wood beeding on top, nails, glues etc. complete as shown in the drawing. Sqm 50 50 100 200.0 4340 868,000.00 4.60 105x25 mm WIDELINE MODULAR ALUMINIUM DOOR FRAME FOR SOLID SHUTTER NOS 52 58 320 430.0 20000 8,600,000.00 Supply & Installation of proprietry Anodised Aluminium door frame of matt Natural finish of aluminium alloy 6063 T5 manufactured from recycled aluminium billets. Anodizing be 10-15um (microns)for door frame using (105 x 25mm) sections with required accessories.From FFL to +2400mm - - 4.7(A) SINGLE LEAF HOLLOW CORE DOOR FOR CCIT & CIT NOS 14 4 64 82.0 40,000.00 3,280,000.00 Construction: 48mm thk Hallow core Door Shutter with veneer/ DINOC finish on both sides. - Hardware : - Hinges :SS ball bearing Butt hinges - Handle:Dorma TH 123 Tubular Handle - Dorma make mortise latch lock - Dorma Premier 711 with key opening on one side & thumb turn on the other. - Door Closer: Concealed type DORMA ITS 96 2-4/ equivalent Door Stopper : Floor mounted door Stopper - Suggested Brand : JEB , ALLOY Systems or equalvalent with prior approval of engineer in chief. - 4.7(B) 75x45mm MODULAR ALUMINIUM STILE DOOR SHUTTERS FOR ITO's, JCIT's,ACIT's,DGIT's etc NOS 38 54 256 348.0 48,825.00 16,991,100.00 Supply & Installation of proprietry Anodised Aluminium door Stiles of matt Natural finish of aluminium alloy 6063 T5 manufactured from recycled aluminium billets. Anodizing shall be 10-15um (microns) for door shutter using 75 x 45mm section for the hinge and the lock stiles with the top & bottom stiles with joinery sections for connecting the stiles together Hardware : DORMA/Equivalent Hinges : 4 nos Aluminium Wide Leaf Hinges Handle:Dorma TH 123 Tubular Handle Dorma make mortise latch lock - Dorma Premier LX 888 with key opening on one side & thumb turn on the other. Door Closer: Exposed door closer TS 73V & hold open arm Design Plus A unit of Gujral Design Overseas Pvt Ltd 16 INCOME TAX DEPARTMENT DSR item code S No. Description Of Item Unit B Block D Block E2 Block Total Floors RATE AMOUNT Door Stopper : Floor mounted door Stopper Suggested Brand : JEB , ALLOY Systems or equalvalent with prior approval of engineer in chief. 4.80 Louvered Shutter Providing and fixing 40mm thick louvered shutter made of 50mm x 30mm thick White Oak wood louvers fixed to 100mm x 40mm White Oak wood stiles @ 50mm c/c, including nails, screws, brushed steel hinges, brushed steel plate for magnetic catcher & locking arrangement, melamine polishing, White Oak wood frame fixed to wall with hold fasts etc. complete as per design and drawing. sqm 35 35 120 190.0 7000 1,330,000.00 4.90 Frameless Glassed Door Shutters. a) Providing and fixing frameless glass swing door made of 12mmthick clear float glass (toughened) with patch fitting of DORMA/GEZE make etc. complete as per design and drawing.( all fitting shall be paid in item no 4.9 a) sqm 50 50 300 400.0 3500 1,400,000.00 b) Providing and fixing following stainless steel hardwares for frameless door shutter - all of 'approved make inclding cutting and making good the floor etc complete. i) Top pivot each 12 12 75 99.0 1953 193,347.00 ii) Bottom patch each 12 12 75 99.0 2604 257,796.00 iii) Upper Patch each 12 12 75 99.0 2604 257,796.00 iv) Floor Lock each 12 12 75 99.0 1953 193,347.00 v) Strike plate each 12 12 75 99.0 1953 193,347.00 vi) Door Handles pair Set 12 12 75 99.0 3798 375,952.50 4.10 Glass Block Providing and laying glass block (imported) wall (straight and curved) using white cement mortar, reinforcement, spacers, anchores, silicon sealant, etc. complete as per manufacturers specifications. Size of the block 190mm x 190mm x 75mm thick. sqm 10 10 20 40.0 5000 200,000.00 4.11 Hydraulic Door Closer Providing & fixing hydraulic door closer exposed type as per approved sample of approved make, (basic rate - Rs. 3000 / each)Suggested Brand :Heetich, geze, dorma or equalvalent with prior approval of engineer in chief. each 12 12 50 74.0 4557 337,218.00 Design Plus A unit of Gujral Design Overseas Pvt Ltd 17 INCOME TAX DEPARTMENT DSR item code S No. Description Of Item Unit B Block D Block E2 Block Total Floors RATE AMOUNT 4.12 Handles & Lock i Providing & fixing Entrance door handle of approved Make, in brushed steel finish etc complete as per design & drawing & manufacturer specifications.Suggested Brand :Heetich, geze, dorma or equalvalent with prior approval of engineer in chief. Set 12 12 90 114.0 5425 618,450.00 ii Providing & fixing wooden door handle 1) Tubular Lever handle2) Sash Lock with 55mm back set, 20mm forend, CTC 72mm & 20 SS Strike Plate3) Euro Profile Cylinder with both side key of length 60mmof approved to include Make in brushed steel finish etc complete as per design & drawing & manufacturer specifications.Suggested Brand :Heetich, geze, dorma or equalvalent with prior approval of engineer in chief. each 30 30 100 160.0 3038 486,080.00 iii Providing & fixing dead lock with strike plate of approved make in wooden door shutters. Suggested Brand :Heetich, geze, dorma or equalvalent with prior approval of engineer in chief. each 5 5 5 15.0 2170 32,550.00 4.13 Floor Spring Providing and fixing in position standard double acting heavy duty floor spring with top pivite to door. Floor spring with 90deg hold open (EN 4), Width of door :max 1100 mm,Weight of door : 100 kgs,Finish : SSS, Adjustable sweep speed & closing speedincluding 3mm thick brushed steel top cover plate with brass screws complete Suggested Brand : DORMA, GEZE, heetich or equalvalent with prior approval of engineer in chief. each 12 12 75 99.0 8500 841,500.00 4.14 P/F Fire door with fire-resistant paint treated wooden frame, 100x50 and 50 mm thick fire resistant flush door shutter of solid core of inorganic vermiculite bonded board with a bulk density of 400 kg/M3 with sheet metal reinforcement at hinge lock and closer location with 120 minutes fire rating conforming to B.S 476 (Part 20 and Part 22) and I.S. 3614 Part of , with heat activated inluminesent fire seal strips (imported from UK or equivalent) of size 10mmx3mm on all sides of the shutter except bottom provided in suitable grooves with stainless steel ball bearing butt hinges (100 mm x 76 mm x 2 mm) with necessary screws including 1.5 mm thick fire retardant laminate on inside and veneer panelling 4mm thk , inside and appropriate fireproof iron mongery , (suggested brand:E-CORE or PACIFIC ) Rate to include providing & fixing SS finished double legged foot operated door stays,1.5mm door silencer beading fixed to frames, Polyvinyl door stopper fixed to skirting, SS finish tubular handle & mortise lock of approved make and pressed steel door frame as per manufacturer's specification all complete as shown on drawing and as directed. The door shutter shall also have a panel 6mm thk, 125x1000mm 120 minutes fire rated glass, surrounded with fireproof treated oak wood beading, all around. (suggested brand for glass: Pilkington PYROSHIELD). The door will have a fire rated Door Closer. Sqm 4.00 4.00 12.00 20.0 16000 320,000.00 Design Plus A unit of Gujral Design Overseas Pvt Ltd 18 INCOME TAX DEPARTMENT DSR item code S No. Description Of Item Unit B Block D Block E2 Block Total Floors RATE AMOUNT 4.15 Providing and fixing E C Drive automatic sliding door system with compact section TUV approval and extremely quiet running gear consisting of bi parting sliding (sensor) door operator modular design including internal cover with operator dimension (HXTXL) 100x180x5000mm of GEZE Make ( GEZE EC Drive ) or equivalent as per manufactures Design ,Drawing & Specifications , inclusive of Glass handing profile, control panel main profile ,cover profile including wiring & all electrical works. a) The track profile should be separate from main profile enabling reduction in vibration insulation microprocessor control, self learning reversing when obstruction is encountered. b) Microprocessor controlled, control unit it should be self learning and adjustable parameters for opening and closing speed, hold open time and opening and close force. CLEAR OPENING 2000X2400MM. Providing and installin the 12mm glass also required for the door each 1 1 2 4.0 220000 880,000.00 Total 62,185,892.25 Design Plus A unit of Gujral Design Overseas Pvt Ltd 19 INCOME TAX DEPARTMENT DSR item code S No. Description Of Item Unit B Block D Block E2 Block Total Floors RATE AMOUNT 5.00 PART E-CABINET WORKS General : All Pre-laminated board specified in this Item or anywhere else in this BOQ shall be MDF Board . 5.10 P/F Ceiling high storage cabinets 450 deep in 19mm thk. both sides pre-lam ply construction with 6mm thk. pre-lam. Ply backing. The horizontal and vertical divisions shall be as per the drawing/details. All the visible surfaces - exposed & inside shall be in lam finish as per approval . All edges will have edge binding tape/laminate of matching colour. All the shutters TO BE MADE OF PLY WOODshall have auto-closing hinges and laminate/edge binding on the edges. All shutters shall have superior quality locks and shall have tubular handles 150/200 long in brushed steel finish as per approval. Sqm. 300.00 450.00 2500.00 3250.0 5975.00 19,418,750.00 5.20 P/F low ht. storage 750/1050/1300 high about 450 deep in 19mm thk. both sides prelam Board construction with 6mm thk. pre-lam. Ply backing. The horizontal and vertical divisions shall be as per the drawing/details. All the visible surfaces - exposed & inside shall be in pre- lam finish as per approval .All edges will have edge binding tape/laminate of matching colour. All the shutters shall have autoclosing hinges and laminate/edge binding on the edges. All shutters shall have superior quality locks and shall have tubular handles 150/200 long in brushed steel finish as per approval. This will have 25 th. post-formed laminated MDF top. It is recommended to use factory made cabinets to be assembled at site and fixed. all hardware would be as per approved makes. Sqm. 60.00 60.00 200.00 320.0 5800.00 1,856,000.00 5.30 P/F Low ht. Storage same specs as 5.2 above , but with 600 depth. This will have a laminated usable top made in curvilinear shape with edge binding or straight shape with post formed tops. Sqm. 20.00 20.00 60.00 100.0 6000.00 600,000.00 5.40 P/F Overhead storage 400 deep in same specs. As item no. 5.1 above. Sqm. 18.00 18.00 64.00 100.0 5500.00 550,000.00 5.50 P/F low ht. under counter storage unit for Pantry 600 deep in 19mm thk. BWP commercial Board construction. The horizontal and vertical divisions shall be as per the drawing/details. All the visible surfaces - exposed & inside shall be in pre-lam finish as per approval . All edges will have edge binding tape/laminate of matching colour. All the shutters shall have auto-closing hinges and laminate/edge binding on the edges. All shutters shall have superior quality locks and shall have tubular handles 150/200 long in brushed steel finish as per approval. Sqm. 20.00 20.00 80.00 120.0 3000.00 360,000.00 Design Plus A unit of Gujral Design Overseas Pvt Ltd 20 INCOME TAX DEPARTMENT DSR item code S No. Description Of Item Unit B Block D Block E2 Block Total Floors RATE AMOUNT 5.60 P/F PERSONAL LOCKER UNIT( PLU) prime quality CRCA steel of multi bend construction fastener free, knock down construction w/Aesthetic punched design door for better ventilation, Special ergonomically designed plastic handles, Label holder for easy identification, Stands are available to facilitate cleaning of work area, Aesthetic leveling screws for alignment.10 lever cam individual locks.w/easy convertibility, i.e. 2 doors to 4 doors vice versa. Anti corrosion treated components and oven-baked powder coating process. a) Top, bottom, LH & RH sides, Door and back material thickness = 0.8mm ( 0.63FOR EXPORT)b) Door with 10 lever cam lock with individual locks, in a multi-unit configuration as/ dwg.Size: 380 x 450 x 1830 No.s 15.00 15.00 40.00 70.0 7250.00 507,500.00 5.70 P/P Working Counter 600 wide with 25 th post formed Laminated Top and fixed under counter Laminated pedestal comprising one pencil drawer, one 5" drawer and one Filing drawer constructed with pre-lam board. One U/C pedestal @ every 1200 running length. sqm 20.00 20.00 50.00 90.0 7500.00 675,000.00 5.80 P/f slotted Angle Racks in MS sections and framework as aper approval. Size 2100 x 900 x 400mm depth nos 100.00 100.00 500.00 700.0 3000.00 2,100,000.00 5.90 Providing and fixing storage cabinet made of 19mm thick comm. board on top, bottom, sides, partitions, shelves, shutters,12 mm thick commercial ply for sides, 6mm thick commercial ply at back of cabinet, 4.0mm thick veneer / 1.0 mm thick laminate on shutters & exposed sides and top of cabinets wherever required, balancing laminate on back surface of shutters and enamel painting on unexposed inner faces, including White Oak wood lipping/ matching PVC edge lipping, melamine polishing, hinges, ball catchers, tower bolts, handles/knobs, multi purpose locks,sliding chanel, etc. complete as per design and drawing.All hardware to be hettich. I) Veneered a) 450mm deep sqm 10 10 50 70.0 8000.00 560,000.00 5.10 Janitor Closet Providing & fixing JANITOR CLOSET 450mmdeep comprising of carcass and shutters constructed from 20mm thick. comm. board finished in 1mm thick. laminate.val, balancing laminate inside , 6x20mm melamine polished BW lipping .Rate should be inclusive of necessary Hardware- SS d-shaped cabinet handles 100mm long, Lock sets, self-closing hinges, latch inside, all cabinet hardware to be of approved make & as/Architects approval. Refer drg No sqm 20 20 100 140.0 3000.00 420,000.00 Design Plus A unit of Gujral Design Overseas Pvt Ltd 21 INCOME TAX DEPARTMENT DSR item code S No. Description Of Item Unit B Block D Block E2 Block Total Floors RATE AMOUNT 5.11 ELECTRICAL D.B. CUPBOARD Providing & fixing 600mm deep cupboard for D.B. panel cabinets comprising shutters constructed from 20mm thick. comm. board finished in 1mm thick. laminate.val, comprising of carcass constructed from 19 mm thick. Bison Board all inside , 6x20mm melamine polished Oak Wood lipping & 12x50 melamine polished Oak Wood trims. Provide 150x300 powder-coated aluminum louvered grilles on each shutter, requisite cutouts for ventilation above and servicing trap door below. Rate should be inclusive of necessary Hardware- SS d-shaped cabinet handles 100mm long, Lock sets, self-closing hinges, spring loaded shutter latch inside, all cabinet hardware to be of approved make & as/Architects approval. SQM 75 75 200 350.0 3500.00 1,225,000.00 5.12 Compactors Storage units of required size 1980 H * 915 W * 381 D having 5 loading level. The shelves will be adjustable at a pitch of approximately 25 mm. With suitable system. The overall height of standard module is 2080 mm from the bottom of the undrecarriage to to the top of module. These modules are fabricated in the factory with knock down construction covered from alla the sides. The sheet used in CRCA confirming to IS:513 Grade D with thickness 0.8 mm for the vertical back, side walls, top cover & horizontal shelves of bodies. The sides/shelves shall be made from steel sheets conforming to relevant codes. The construction of units shall be such that protection from dust by suitable overlaping of shttes for the overall size of the body is 2 mm. The bodies should be complete knock down type and UDL for each shelf should be 40 kg. Bodies are fixed/movable are bolted to undercarriage is allowed on site. Bodies are fixed/movable are bolted to undercarriage made up of 3 mm rolls onto channels/rail consists of J section 2 mm thk HR steel & 25 mm are embedded to the levelled ground. providing 2 row of compactors 10 nos of cabinets moving on rail fixed to the floor. nos 6 12 70 88.0 270000.00 23,760,000.00 5.13 Glass Shelves Providing and fixing 12 mm thick glass shelves in nitche supported with approved S.S. brackets as per design and drawing.(glass area shall be mesured for payment) Sqm 10 10 45 65.0 3007.00 195,455.00 5.14 Fixed Work Counter of Varying Sizes Providing and fixing in position fixed work counter of varying sizes and made of 19mm thick prelaminated board table top( post formed) & on vertical side, drawer front, 12mm thick commercial at drawer sides & back, 6mm thick commercial ply at bottom,1.0mm thick laminate on all exposed faces, PVC edge lipping on edges, laminate on unexposed faces & on inside faces of drawers & key board trays, including all glues, nails, sliding channel, bracket for support fixed to portition, hinges, knobs, multipurpose locks, wire manager etc. complete as per design and drawing. staff table counter 600-750mm wide including key board, drawer & cabinet below the counter and cabinet for CPU. ( plan area shall be measured for payment) Sqm 20 20 100 140.0 8137.50 1,139,250.00 5.15 Low Height Partition Design Plus A unit of Gujral Design Overseas Pvt Ltd 22