IBM System Networking Options for RackSwitch, IBM Flex System and IBM BladeCenter Bringing speed and intelligence to the edge of the network
IBM System Networking IBM Systems and Technology Group
IBM System Networking Options for RackSwitch,
IBM Flex System and IBM BladeCenter
Page 2 Table of Contents IBM System Networking Options for RackSwitch, IBM Flex System and IBM BladeCenter ............... 1 Bringing speed and intelligence to the edge of the network ............................................................. 1 Executive Overview .................................................................................................................................... 3 Rack Kits ..................................................................................................................................................... 3 Ethernet I/O Connectivity (Transceivers & Direct Attached Cables) ..................................................... 3 Switches for IBM BladeCenter .................................................................................................................. 5 Transceivers for IBM BladeCenter switch modules ................................................................................ 6 Switches for IBM Flex Systems ................................................................................................................. 7 IBM Flex System Options .......................................................................................................................... 9 IBM System Networking RackSwitch ..................................................................................................... 10 Transceivers for IBM RackSwitch ........................................................................................................... 11 Recommended I/O Cables ....................................................................................................................... 12 10GbE CX4 Cables.................................................................................................................................... 12 Spare Parts for the RackSwitch Products ............................................................................................. 13 Recommended Power Cables ................................................................................................................. 14 * Specific to IBM PureSystems ................................................................................................................ 15 IBM System Networking Element Manager (SNEM) .............................................................................. 15
IBM System Networking Options for RackSwitch, IBM Flex System and IBM BladeCenter
Page 3 Executive Overview IBM System Networking has a large portfolio of embedded switches for IBM BladeCenter and IBM Flex Systems, in addition to a number of Data Center (Top-of-Rack) RackSwitch products. The following document provides details on some of the options available for these switches, including Part Numbers (PN) for the System x channels and Feature Codes (FC) for Power/Storage. Rack Kits All RackSwitch products ship with 2-post rack kits, which are included in an accessory box, inside of the switch box. (No additional purchase is required) For iDataPlex rack clients should order PN 90Y3535 for the RackSwitch front-to- rear models. An optional IBM 19 Flexible 4 Post Rail Kit can be purchased separately (Part Number 49Y4284, Feature Code EU06) and can be adjusted to fit a variety of racks 27/32 apart. Ethernet I/O Connectivity (Transceivers & Direct Attached Cables) Over the past decade, there is a mix of connections being used like SFP, SFP+, XFP, CX4 and QSFP+ technologies. This section is intended to help recommend cables and transceivers for IBM System Networking switches and include part numbers for the recommended cables. 1Gb Ethernet The majority of 1Gb clients will use RJ -45, but in some instances clients might need to go longer distances. SX transceivers support distances up to 220 meters using 62.5/125 multi-mode fiber and up to 550 meters with 50/100 multi-mode fiber. LX transceivers support distances up to 10 kilometers using 8.3/9/10 m Single- mode, Long Haul Fiber (1300nm) single mode fiber.
10GBase-T Ethernet The use of 10GBase-T is likely to be used by clients who value cost over latency and power. 10Gbase-T allows clients to use low cost copper CAT6/6A cables with RJ 45 connections.
IBM System Networking Options for RackSwitch, IBM Flex System and IBM BladeCenter
Page 4 10Gb SFP+Ethernet Ideal for clients wanting low latency and low power consumption. Most clients will use Direct Attached Copper (DAC) SFP+cables for distances up to 7 meters. For longer distances the SR transceiver can support distances up to 300 meters, while the LR transceivers support up to 10 kilometers and the ER transceivers support up to 40 kilometers. IBM also offers optical cables which are required for using each of the transceivers.
40Gb Ethernet While this is a new technology, there is a lot of flexibility for clients. To increase the number of available 10G ports, clients can use IBM QSFP+DAC Break Out Cables to split out each 40Gb port and connect up to four 10Gb SFP+external ports. For 40G to 40G connectivity, clients can use IBM QSFP+to QSFP+cables up to 7 meters or combine 40G transceivers and optical cables for longer distances.
IBM System Networking Options for RackSwitch, IBM Flex System and IBM BladeCenter
Page 5 Switches for IBM BladeCenter IBM BladeCenter Virtual Fabric 10G Switch Module (46C7191) This switch has 10 external 10G Ethernet ports that can support of mix of 1G/10G transceivers and/or DAC cables. Note: If you have an XFP port on your storage device or networking switch, you will need to use an approved 10GBase-SR XFP transceiver on that device. Then you will use the10Gbase-SR SFP+transceiver on the Virtual Fabric 10G Switch module. You can then connect the two devices with an LC-to-LC multimode fiber patch cable. IBM iFlow Director (46C9250) The iFlow Director is a high-throughput, low-latency, traffic load distribution system in a 10 Gbps Ethernet switch for BladeCenter H and HT. This switch has 10 external 10G Ethernet ports that can support of mix of 1G/10G transceivers and/or DAC cables. Note: If you have an XFP port on your storage device or networking switch, you will need to use an approved 10GBase-SR XFP transceiver on that device. Then you will use the10Gbase-SR SFP+transceiver on the Virtual Fabric 10G Switch module. You can then connect the two devices with an LC-to-LC multimode fiber patch cable.
IBM BladeCenter 1/10G Uplink Ethernet Switch Module (44W4404) This switch has six external 1GB RJ -45 ports and three 10Gb SFP+uplink ports that 10G transceivers and/ or 10G DAC cables.
IBM BladeCenter Layer 2/3 Copper Ethernet Switch Module (System x =32R1860, Power =3212) Supports up to SIX 1Gb RJ -45 ports which simply require Cat5e cables see Cables section.
IBM BladeCenter Layer 2-7 (32R1859) Ethernet Switch Module Supports up to FOUR 1Gb RJ -45 ports which simply require Cat5e cables see Cables section.
IBM BladeCenter Layer 2/3 Fiber (32R1861) Ethernet Switch Module Supports up to SIX 1Gb Fiber ports and comes standard with six IBM SFP SX transceivers. Can also support optional, IBM SFP LX Transceivers (PN 90Y9424).
IBM System Networking Options for RackSwitch, IBM Flex System and IBM BladeCenter
Page 6 Transceivers for IBM BladeCenter switch modules System x PN Power Feature Code VF 10Gb 46C7191 iFlow 46C9250 1/10G 44W4404 L2-7 32R1859 1Gb Transceivers for SFP+ ports
IBM SFP RJ45 Transcei ver (IBM also offers Cat5E cables) 81Y1618 X X IBM SFP SX Transcei ver 81Y1622 X X Standard IBM SFP LX Transcei ver 90Y9424 X X X 1
10Gb Transceivers for SFP+ ports
IBM SFP+ SR Transcei ver 46C3447 5053 X X X IBM SFP+ LR Transcei ver 90Y9412 A1PM X X X IBM SFP+ ER Transcei ver 90Y9415 A1PP X X 10Gb Direct Attach Copper Cables
0.5m IBM Passi ve DAC 00D6288 X X 1m IBM Passive DAC 90Y9427 A1PH X X X 3m IBM Passive DAC 90Y9430 A1PJ X X X 5m IBM Passive DAC 90Y9433 A1PK X X X 7m IBM Passive DAC 00D6151 X X
1 Purchased separately and must replace the SX transceiver which ships standard IBM System Networking Options for RackSwitch, IBM Flex System and IBM BladeCenter
Page 7 Switches for IBM Flex Systems IBM Flex System Fabric EN4093R 10Gb Scalable Switch This switch offers pay as you grow scalability, allowing clients to purchase upgrades to turn on more ports down to the nodes in the chassis in addition to uplink ports. The following shows the total number of ports supported in each configuration, and the upgrades, which must be done in the order shown below: Base configurations (Part Number =59Y3309, Power =ESW7) supports fourteen 10Gb node ports, plus ten external 10G SFP+Ethernet ports that can support of mix of 1G/10G transceivers and/or DAC cables Base with Upgrade 1 (Part Number =49Y4798, Power =3596) supports twenty eight 10Gb node ports (2 to each server bay per switch), plus ten external 10G SFP+Ethernet ports that can support of mix of 1G/10G transceivers and/or DAC cables and two 40Gb QSFP+external ports which support transceivers, break-out cables and/or QSFP+to QSFP+cables. Base with Upgrade 1 & Upgrade 2 (Part Number =88Y6037, Power =3597) supports forty- two 10Gb node ports (3 to each server bay per switch), plus fourteen external 10G SFP+ ports that can support of mix of 1G/10G transceivers and/or DAC cables and two 40Gb QSFP+external ports which support transceivers, break-out cables and/or QSFP+cables.
IBM Flex System Fabric CN4093 10Gb Converged Scalable Switch
This switch is ideal for clients looking for native FC connectivity to a FC SAN or in-chassis FC SAN storage provided by Flex System V7000 Storage Node using IBMs OmniPorts. This switch also provides pay as you grow scalability, allowing clients to purchase upgrades to turn on more ports down to the server in addition to uplink ports. The following shows the total number of ports supported in each configuration, and the upgrades, which can be done in any order: Base configurations (Part Number =00D5823, Power =ESW2) supports fourteen 10Gb node ports. Plus two external 10G SFP+Ethernet ports (can support of mix of 1G/10G transceivers and/or DAC cables) and six OmniPorts which can support 10Gb Ethernet or 4/8Gb Fibre Channel. Base with Upgrade 1 (Part Number =00D5845, Power =ESU1) supports twenty eight 10Gb compute node ports (2 to each server bay per switch). Plus two external 10G SFP+Ethernet ports (1/10GbE), six OmniPorts which can support 10Gb Ethernet or 4/8Gb Fibre Channel and two 40Gb QSFP+external ports which support transceivers, break-out cables and/or QSFP+to QSFP+cables. Base with Upgrade 2 (Part Number =00D5487, Power =ESU2) supports twenty eight 10Gb compute node ports (2 to each server bay per switch). Plus two external 10G SFP+Ethernet ports (1/10GbE) and twelve OmniPorts which can support 10Gb Ethernet or 4/8Gb Fibre Channel. Base with Upgrade 1 & Upgrade 2 supports forty-two 10Gb server port (3 to each server bay per switch, once adapter is available). Plus two external 10G SFP+Ethernet ports (1/10GbE), twelve OmniPorts which can support 10Gb Ethernet or 4/8Gb Fibre Channel and two 40Gb QSFP+external ports which support transceivers, break-out cables and/or QSFP+to QSFP+ cables.
IBM System Networking Options for RackSwitch,
IBM Flex System and IBM BladeCenter
Page 8 IBM Flex System EN2092 1Gb Scalable Switch This switch offers pay as you grow scalability, allowing clients to purchase upgrades to turn on more ports down to the compute nodes and/or addition to uplink ports. The following shows scalability options: Base configurations (Part Number =49Y4294, Power =3598) supports fourteen 1Gb node ports, plus ten external RJ 45 1G ports which simply require Cat5e cables see cables section. Upgrade 1 (Part Number =49Y3562, Power =3594) doubles the ports =supports twenty eight 1Gb node ports (2 to each server bay per switch), plus ten external RJ 45 1G ports which simply require Cat5e cables. Upgrade 2 (Part Number =49Y4298, Power =3599) enables four external 10G SFP+ports support of mix of 1G/10G transceivers and/or DAC cables
IBM Flex System EN4091 10Gb Ethernet Pass-Thru
This device comes with 14 external SFP+10Gb ports which can support of mix of 1G/10G transceivers and/or 10G active Direct Attached Copper / Twinax cables.
IBM System Networking Options for RackSwitch, IBM Flex System and IBM BladeCenter
Page 9 IBM Flex System Options
System x Part Number Power Feature Code CN4093 EN4093R EN2092 EN4091 1Gb Transceivers for SFP+ ports IBM SFP RJ45 Transcei ver (IBM also offers Cat5E cables) 81Y1618 3268/EB29 X X X X IBM SFP SX Transcei ver 81Y1622 3269/EB2A X X X X IBM SFP LX Transcei ver 90Y9424 A1PN X X X X 10Gb Transceivers (SFP+/Omni Port) IBM SFP+ SR Transcei ver 46C3447 5053 X X X X IBM SFP+ LR Transcei ver 90Y9412 A1PM X X X X 10Gb Direct Attach Copper Cables 0.5m IBM Passi ve DAC 00D6288 X X X 1m IBM Passive DAC 90Y9427 A1DR/ECB4 X X X 3m IBM Passive DAC 90Y9430 A1PJ /ECB5 X X X 5m IBM Passive DAC 90Y9433 A1PK/ECB6 X X X 7m IBM Passive DAC 00D6151 Y* X X 1m 10GE Twinax Act Copper SFP+ 81Y8295 A18M/EN01 X 3m 10GE Twinax Act Copper SFP+ 81Y8296 A18N/EN02 X 5m 10GE Twinax Act Copper SFP+ 81Y8297 A18P/EN03 X 1m IBM Acti ve DAC SFP+ Cable 95Y0323 A25A X 3m IBM Acti ve DAC SFP+ Cable 95Y0326 A25B X 5m IBM Acti ve DAC SFP+ Cable 95Y0329 A25C X 40Gb Transceivers IBM QSFP+ SR Transcei ver 49Y7884 EB27 X X Break Out Cables 40Gb to 4x10G DAC SFP+ connections 1M IBM QSFP+ DAC Break Out 49Y7886 A1DL/EB24 X X 3M IBM QSFP+ DAC Break Out 49Y7887 A1DM/EB25 X X 5m IBM QSFP+ DAC Break Out 49Y7888 A1DN/EB26 X X 40Gb QSFP+ to QSFP+ Cables 1M IBM Passive QSFP+ to QSFP+ 49Y7890 A1DP X X 3M IBM Passive QSFP+ to QSFP+ 49Y7891 A1DQ X X Fibre Channel Transcei vers (Omni Ports Only) 8Gb SFP+ SW Optical Transcei ver 44X1964 3286 X 4Gb SFP Transcei ver Option 39R6475 3238 X Y* =supported on SFP+ports only not on Omni Ports IBM System Networking Options for RackSwitch, IBM Flex System and IBM BladeCenter
Page 10 IBM System Networking RackSwitch IBM RackSwitch G8316 (System x =8036ARX / 8036FRX, Power =1611-16E) The G8316 is a 40 Gigabit Ethernet (GbE) aggregation switch designed for the data center, providing speed, intelligence and interoperability on a proven platform. The RackSwitch G8316 offers up to 16 40 GbE, which can also be used as a high-density 10 GbE switch, with 1.28 Tbpsin a 1U footprint.
IBM RackSwitch G8264CS (System x 7309DRX/7309DFX, Power 1455-64F) This switch is designed for converged environments where clients are looking for FCoE or FC connectivity with 12 Omni Ports, plus 32 10Gb SFP+ports and four 40Gb QSFP+ports standard. Omni Ports can support a mix of 10GbE transceivers or DAC cables, in addition to 4/8GB Fibre Channel transceivers. The SFP+ports can support a mix of 1G/10G transceivers and/ or more cost effective 10G DAC cables. The 40Gb QSFP+ports also provide a lot of flexibility with support for: 1) break-out cables that allow for connection to four 10Gb SFP+connections; 2) QSFP+to QSFP+cables or 3) 40Gb QSFP+transceivers.
IBM RackSwitch G8264 (System x =7309G64 / 730964F, Power =1455-64C) This switch is designed for performance with 48 10Gb SFP+ports and four 40Gb QSFP+ports standard. The SFP+ports can support a mix of 1G/10G transceivers and/ or more cost effective 10G DAC cables. The 40Gb QSFP+ports also provide a lot of flexibility with support for: 1) break-out cables that allow for connection to four 10Gb SFP+connections; 2) QSFP+to QSFP+cables or 3) 40Gb QSFP+ transceivers.
IBM RackSwitch G8264T (System x=7309CR9 / 7309CF9, Power =1455-48T) This switch is designed for performance with 48 10GBase-T ports and four 40Gb QSFP+ports standard. The 10GBase-T ports can support industry standard CAT6/6A cables. The 40Gb QSFP+ports also provide a lot of flexibility with support for: 1) break-out cables that allow for connection to four 10Gb SFP+ connections; 2) QSFP+to QSFP+cables or 3) 40Gb QSFP+transceivers.
IBM RackSwitch G8124 /G8124E G8124 (0446017, 7309BF9 - Withdrawn from market) G8124DC (System x = 7309BD5) G8124E (System x = 7309BR6, 7309BF7, Power = 1455-24E*) Comes with 2 SFP+10Gb ports which can support of mix of 1G/10G transceivers and/or 10G DAC cables.
IBM RackSwitch G8052 (System x=7309G52, 730952F, Power =1455-48E*) Supports 48 RJ 45 1G ports and four SFP+10GbE ports, plus a mix of 1G/10G transceivers and/or 10G DAC cables.
IBM RackSwitch G8000 & G8000DC (System x=0446013, IBM System Networking Options for RackSwitch, IBM Flex System and IBM BladeCenter
Page 11 7309CFC, 7309CD8) Supports 44 RJ 45 1G ports, 4 1G SFP ports, and supports up to 4 10GbE ports using CX4, or SFP+(SFP+ports are 10G only and support 10G SFP+and 10G DAC cables). G8000 Uplink Modules support up to two modules per switch one in the front and the other in the rear IBM RackSwitch 10Gb Dual-port SFP+Uplink module 46C3417 IBM RackSwitch 10Gb Dual-port CX4 Uplink module 46C3421 Stacking uses 10Gb Ethernet SFP+Transceivers or less costly DAC Cables, using any 2 SFP+uplink ports. Transceivers for IBM RackSwitch
System x Part Number Power Feature Code G 8 3 1 6
G 8 2 6 4 C S
G 8 2 6 4
G 8 2 6 4 T
G 8 1 2 4 E
G 8 0 5 2
G 8 0 0 0
1Gb Transceivers for SFP+ ports IBM SFP RJ45 (Cat5E cables) 81Y1618 EB29 X* X X X X IBM SFP SX 81Y1622 EB2A X* X X X X IBM SFP LX 90Y9424 ECB8 X* X X X X 10Gb Transceivers for SFP+ Ports IBM SFP+ SR 46C3447 EB28 X X X X X IBM SFP+ LR 90Y9412 ECB9 X X X X IBM SFP+ LR 00D6180 X IBM SFP+ ER 90Y9415 ECBA X** X X X X 10Gb Direct Attach Copper SFP+ Cables 0.5m IBM Passive 00D6288 X X X X X 1m IBM Passi ve 90Y9427 ECB4 X X X X X 3m IBM Passi ve 90Y9430 ECB5 X X X X X 5m IBM Passi ve 90Y9433 ECB6 X X X X X 7m IBM Passi ve 00D6151 X* X X X X 1m IBM Acti ve 95Y0323 EN01 X X X X 3m IBM Acti ve 95Y0326 EN02 X X X X 5m IBM Acti ve 95Y0329 EN03 X X X X 40Gb Transceivers IBM QSFP+ SR 49Y7884 EB27 X X X X Break Out Cables 40Gb to 4x10G DAC SFP+ connections 1M IBM breakout 49Y7886 EB24 X X X X 3M IBM breakout 49Y7887 EB25 X X X X 5m IBM breakout 49Y7888 EB26 X X X X 40Gb QSFP+ to QSFP+ Cables 1M IBM Passi ve 49Y7890 EB2B X X X X 3M IBM Passi ve 49Y7891 EB2H X X X X 5m IBM Passi ve 00D5810 ECBN X X X X 7m IBM Passi ve 00D5813 ECBP X X X X Fibre Channel Transcei vers (Omni Ports Only) 8Gb FC SFP+ SW 00D6183 3286 X 4Gb FC SFP SW 39R6475 3238 X * Only supported in the SFP+ports, not in Omni Ports ** Support up to 6 ER per switch See Cables section for more details on cabling: When using T transceivers (RJ -45) IBM also offers Cat5e Cables. IBM System Networking Options for RackSwitch, IBM Flex System and IBM BladeCenter
Page 12 Recommended I/O Cables 1GbE Cat5e Cables These IBM Blue Cat5e cables should be used when using ports/transceivers that have RJ -45 connections: Brand / Length 0.6 m PN 1.5m PN 3m PN 10m PN 25m PN Part Number 40K5679 40K8785 40K5581 40K8927 40K8930 Feature Code ECB0 ECB2 1111 1112 1113 10GBase-SR Fiber Optical Cables These transceivers can utilize a variety of multimode (MMF) fiber cables with LC connectors at the transceiver side. Description IBM Part Number IBM Feature Code
1m LC-LC Fiber Cable 88Y6851 ECBC 5m LC-LC Fiber Cable 88Y6854 ECBD 25m LC-LC Fiber Cable 88Y6857 ECBE The maximum distance is determined by the type of fiber used. The following are recommendations not sold by IBM. 62.5 micron 200MHz*km distances up to 33 meters, 50 micron 400MHz*km distances up to 66 meters, 50 micron 500MHz*km distances up to 82 meters, 50 micron 2000MHz*km distances up to 300 meters 10GbE CX4 Cables
Passive CX4 cables can be used for distances up to 15 meters. 10GbE CX4 cables available from Molex, Gore or Amphenol. These are different than Infiniband CX4 cables which are NOT SUPPORTED. Brand / Length 0.5 m PN 1m PN 3m PN 5m PN 10m PN 15m PN Gore IBN6800-.5 IBN6800-1 IBN6800-3 IBN6800-5 IBN6800-10 IBN6800-15 Ampehnol 562330001 562330003 56233007 562330011 562340010 562340015
40GbE QSFP+MTP Optical Cable QSFP+MTP Optical Cables can be used for distances up to 30 meters. The recommended cables are: Description IBM Part Number IBM Feature Code 10m IBM QSFP+ MTP Optical Cable 90Y3519 EB2J / A1MM 30m IBM QSFP+ MTP Optical Cable 90Y3521 EB2K / A1MN
IBM System Networking Options for RackSwitch, IBM Flex System and IBM BladeCenter
Page 13 Spare Parts for the RackSwitch Products While the RackSwitch products do come standard with all the necessary fans and power supplies for redundancy, some clients have expressed the desire to have spare parts available for easy hot-swap replacement. In addition, we also have made the console cable kit available. Sold through System x, today Power Systems only sells spares as FRUs for fan assembly and power supply spares: Spare Parts G8052 G8264 G8264T G8264CS G8316 Hot-Swap, Rear-to-Front Fan Assembly Spare (PN 88Y6026) X X X X X Hot-Swap, Front-to-Rear Fan Assembly Spare (PN 49Y7939) X X X X X Hot-Swap, Rear-to-Front Power Supply Spare (PN 49Y7938) X X X Hot-Swap, Front-to-Rear Power Supply Spare (PN 49Y7937) X X X Hot-Swap, Front-to-Rear 550W CFF Power Supply Spare (PN 00D5961) X Hot-Swap, Rear-to-Front 750W CFF Power Supply Spare (PN 00D5857) X Hot-Swap, Rear-to-Front 750W CFF Power Supply Spare (PN 00D5858) X X Console Cable Kit Spare (System x PN 90Y9462 & Power FC EUC4) X X X X
IBM System Networking Options for RackSwitch, IBM Flex System and IBM BladeCenter
Page 14 Recommended Power Cables The RackSwitch products do not ship with power cables standard. Make sure you select two cables for your country. IBM System x Offerings Part Number G 8 0 0 0
G 8 0 5 2
G 8 1 2 4 E
G 8 2 6 4
G 8 2 6 4 T
G 8 2 6 4 C S
G 8 3 1 6
Power Cord Europe 39Y7917 Y Y Y Y Y Power Cord Europe 39Y7918 Y Y Y Y Y Power Cord Europe 39Y7919 Y Y Y Y Y Power Cord Europe 39Y7920 Y Y Y Y Y Power Cord Europe 39Y7922 Y Y Y Y Y Power Cord UK 39Y7923 Y Y Y Y Y Power Cord Australia 39Y7924 Y Y Y Y Y Power Cord Korea 39Y7925 Y Y Y Y Y Power Cord J apan 39Y7926 Y Y Y Y Y Power Cord India 39Y7927 Y Y Y Y Y Power Cord China 39Y7928 Y Y Y Y Y Power Cord Brazil 39Y7929 Y Y Y Y Y Power Cord Uruguay / Argentina 39Y7930 Y Y Y Y Y Power Cord US / Canada 39Y7931 Y Y Power Cord US / Canada 46M2592 Y Y Y Power Cord J apan 46M2593 Y Y Y 4.3m, 10A/100-250V, C13 to IEC 320-C14 Rack Power Cable 39Y7932 Y Y Y Y Y 1.5m, 10A/100-250V, C13 to IEC 320-C14 Rack Power Cable 39Y7937 Y Y Y Y Y 2.8m, 10A/100-250V, C13 to IEC 320-C20 Rack Power Cable 39Y7938 Y Y
IBM Power and Storage Offerings Feature Codes Power Cord 4.3m (14-ft), Drawer to Wall/IBM PDU (250V/10A) 6458 Power Cord 4.3m (14-ft), Drawer to Wall/OEM PDU (250V/15A) U. S. 6469 Power Cord 1.8m (6-ft), Drawer to Wall (125V/15A) 6470 Power Cord 2.7m (9-ft), Drawer to Wall/OEM PDU (125V/15A) 6471 Power Cord 2.7m (9-ft), Drawer to Wall/OEM PDU (250V/16A) 6472 Power Cord 2.7m (9-ft), Drawer to Wall/OEM PDU (250V/10A) 6473 Power Cord 2.7m (9-ft), Drawer to Wall/OEM PDU, (250V/13A) 6474 Power Cord 2.7m (9-ft), Drawer to Wall/OEM PDU, (250V/16A) 6475 Power Cord 2.7m (9-ft), Drawer to Wall/OEM PDU, (250V/10A) 6476 Power Cord 2.7m (9-ft), Drawer to Wall/OEM PDU, (250V/16A) 6477 Power Cord 2.7m (9-ft), Drawer to Wall/OEM PDU, (125V/15A or 250V/10A) 6488 Power Cord 2.7m (9-ft), Drawer to Wall/OEM PDU, (250V/10A) 6493 Power Cord 2.7m (9-ft), Drawer to Wall/OEM PDU, (250V/10A) 6494 Power Cord 4.3m (14-ft), Drawer to Wall/OEM PDU (125V/15A) 6660 Power Cord 2.8m (9.2-ft), Drawer to Wall/IBM PDU, (250V/ 10A) 6665 Power Cord 2.7m (9-ft), Drawer to Wall/OEM PDU, (250V/10A) 6680 IBM System Networking Options for RackSwitch, IBM Flex System and IBM BladeCenter
Page 15 * Specific to IBM PureSystems IBM System Networking Element Manager (SNEM) SNEM is software with extensive network management capabilities. From single installation, you can use leading Tivoli network management capabilities and launch-in-context and single sign-on with IBM Systems Director.
Description US/Canada LA EMEA AP IBM SNEM V6.x for 20 Switches, Per Install w/1 Yr. S&S 00D4662 00D4674 00D4662 00D4662 IBM SNEM V6.x for 50 Switches, Per Install w/1 Yr. S&S 00D4663 00D4675 00D4663 00D4663 IBM SNEM V6.x for 100 Switches, Per Install w/1 Yr. S&S 00D4664 00D4676 00D4664 00D4664 IBM SNEM V6.x for 250 Switches, Per Install w/1 Yr. S&S 00D4665 00D4677 00D4665 00D4665 IBM SNEM V6.x for 500 Switches, Per Install w/1 Yr. S&S 00D4666 00D4678 00D4666 00D4666 IBM SNEM V6.x for 1000 Switches, Per Install w/1 Yr. S&S 00D4667 00D4679 00D4667 00D4667 IBM SNEM V6.x for 20 Switches, Per Install w/3 Yr. S&S 00D4668 00D4680 00D4668 00D4668 IBM SNEM V6.x for 50 Switches, Per Install w/3 Yr. S&S 00D4669 00D4681 00D4669 00D4669 IBM SNEM V6.x for 100 Switches, Per Install w/3 Yr. S&S 00D4670 00D4682 00D4670 00D4670 IBM SNEM V6.x for 250 Switches, Per Install w/3 Yr. S&S 00D4671 00D4683 00D4671 00D4671 IBM SNEM V6.x for 500 Switches, Per Install w/3 Yr. S&S 00D4672 00D4684 00D4672 00D4672 IBM SNEM V6.x for 1000 Switches, Per Install w/3 Yr. S&S 00D4673 00D4685 00D4673 00D4673
IBM System Networking Options for RackSwitch, IBM Flex System and IBM BladeCenter
Page 16
For More Information IBM System x Servers http://ibm.com/systems/x IBM BladeCenter Server and options http://ibm.com/systems/bladecenter IBM Systems Director Service and Support Manager http://ibm.com/support/electronic IBM System x and BladeCenter Power Configurator http://ibm.com/systems/bladecenter/resources/powerconfig.html IBM Standalone Solutions Configuration Tool http://ibm.com/systems/x/hardware/configtools.html IBM Configuration and Options Guide http://ibm.com/systems/x/hardware/configtools.html IBM ServerProven Program http://ibm.com/systems/info/x86servers/serverproven/compat/us Technical Support http://ibm.com/server/support Other Technical Support Resources http://ibm.com/systems/support Legal Information IBM Corporation 2013 IBM Systems and Technology Group Dept. U2SA 3039 Cornwallis Road Research Triangle Park, NC 27709 Produced in the USA February 2013 All rights reserved. For a copy of applicable product warranties, write to: Warranty Information, P.O. Box 12195, RTP, NC 27709, Attn: Dept. J DJ A/B203. IBM makes no representation or warranty regarding third-party products or services. Telephone support may be subject to additional charges. For onsite labor, IBM will attempt to diagnose and resolve the problem remotely before sending a technician. IBM, the IBM logo, ibm.com, BladeCenter, Flex System, PureFlex, RackSwitch, VMready, System Networking and System x are trademarks of IBM Corporation in the United States and/or other countries. If these and other IBM trademarked terms are marked on their first occurrence in this information with a trademark symbol ( or ), these symbols indicate U.S. registered or common law trademarks owned by IBM at the time this information was published. Such trademarks may also be registered or common law trademarks in other countries. For a list of additional IBM trademarks, please see http://ibm.com/legal/copytrade.shtml. Other company, product and service names may be trademarks or service marks of others. IBM reserves the right to change specifications or other product information without notice. References in this publication to IBM products or services do not imply that IBM intends to make them available in all countries in which IBM operates. IBM PROVIDES THIS PUBLICATION AS ISWITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Some jurisdictions do not allow disclaimer of express or implied warranties in certain transactions; therefore, this statement may not apply to you. Information in this document concerning non-IBM products was obtained from the suppliers of these products, published announcement material or other publicly available sources. IBM has not tested these products and cannot confirm the accuracy of performance, compatibility or any other claims related to non-IBM products. Questions on the capabilities of non-IBM products should be addressed to the suppliers of those products. Performance is in Internal Throughput Rate (ITR) ratio based on measurements and projections using standard IBM benchmarks in a controlled environment. The actual throughput that any user will experience will depend on considerations such as the amount of multiprogramming in the users job stream, the I/O configuration, the storage configuration and the workload processed. Therefore, no assurance can be given that an individual user will achieve throughput improvements equivalent to the performance ratios stated here. QCF12363-USEN-00