You are on page 1of 3

ABDUL FATAH MEMON

HOUSE NO: -978, STREET NO 27, SECTOR F 9, PHASE – 6, HAYATABAD,


PESHAWER, MWFP, PAKISTAN.

HOUSE NO: - B – 4, FARAZ VILLAZE PHASE 2, NEAR JANATUL FIRDOUS MOSQUE


QASIMABAD, HYDERABAD, SINDH, PAKISTAN.
Mobile # 0300-3060478, 0346-3400134, 0331-3640078
E-Mail = afm4000@yahoo.com,
OBJECTIVE

To join a competitive organization where I can introduce my Innovative & Bright Ideas

PERSONAL INFORMATION:-

FATHER NAME RIAZ AHMED MEMON


DATE OF BRITH 15TH MARCH 1973
NATIONALITY PAKISTAN
N.I.C NO. 41303-3350191-5
DOMICILE SUKKUR (SIND)
POSSPORT NO AF8441911 (23 Aug 2008 to 22 Aug 2013)

KEY QUALIFICATION:-
B.E 1996
In Mechanical Engineering with 01st Division 75.14% marks.
from Mehran university of engineering
And technology jamshoro.
Member of Pakistan Engineering Council – PEC No. Mach: 13059

SPECIAL TRAINING: Course on awareness of ISO 9000 and ISO 9000 Internal Auditing
Auto CAD 2002 (2d Dimension)
MS office

EDUCATION:-

Matric 1988
Matric from Govt. high school Sukkur.
H.S.C. 1990
From Govt. islamia college Sukkur.

PROJECT/ THESIS:-
Operation & Maintenance of 250 MW Boiler at thermal power station jamshoro Sind.

PROFESSIONAL EXPERIENCE:-

PM Auto Industries (Pvt) Ltd February 2008 to till update.

Working with PM Auto Industries (Pvt) Ltd, as Mechanical Engineer.


Company Profile :
• To assembly tractor (EURO – F) license from Turkey, three MODEL of tractor 55 HP,
65 HP, 80 HP.
• Three MODEL of cargo vehicles license from China. CARRYING CAPACITY ONE,
TWO, THREE TON.
• DFM passenger car, DFM cargo vehicle FOUR CYLINDERS, and car 650 cc all
products assemble here on this plant.

1
Responsibilities:-

• To control the assembly process of 4 cylinder engine. Transmission assembly process ,


Tractor & cargo vehicle assembly process, Paint shop process and get the out put of finish
product of tractor & cargo vehicle (Model Euro – F 5880, F 4560, F 3580)
• To inspect the local component of each section before assembly operation.
• To control the defect of incoming component as well as line process inspection and maintain
the AQL level according to the drawing specification.
• To get the out put of finish product for final operation of tractor & cargo vehicle.
• To get the feed back report from marking department for field tractor & cargo vehicle.
• To attend the field complains of tractor & cargo vehicle with different dealers.
• Meeting with marking department to reduce the defect of field complaint.
• Visit to the vendor and inspect the process during working operation and reduce the defect
of components.
• To get the plant equipment and machinery for smooth operation of production according
the preventive maintenance schedule.
• To maintain the conveyor line for ground and overhead.
• To maintain the overhead pipe line
A: Compressed air pipe line.
B: Oil pipe line.
C: Water pipe line.
• Erection / fitting of pipe line on side according to the layout and maintain
• To maintain the overhead electric hoist.
• To get out put of tractor assembly and transmission assembly as well as get the out put from
paint shop according to given target.

MEMON MOTERS (PVT) LTD March 2000 to January 2008

Having eight year experience of working with MEMON ASSOCIATE FOUNDRY as Assistant
Mechanical Engineer, there I was involved, Quality control, Store inventory control,
Research & development, Purchasing, Vendor development cell
Maintenance of all Mechanical equipment at plant (Pumps, (SUBMERCIBLE, Devartring,
Vaccum) Compressor, Resiprocating, (Atlas copco, Ingersolerend,)
Generator, (cumin’s, F.G Wilson, Komatso, Caterpillar)

FATEH MOTORS LTD, HYDERABAD January 1997 to February 2000

Worked as a Mechanical Engineer, details are as follows:


1. Installation and commissioning of main assembly line conveyor and Engine assembly
line conveyor under supervision of Chinese Erectors.
2. Dy to day plant maintenance jobs.
3. Installation and commissioning of Phosphating Plant (parts degreasing Plant)

2
4. Worked as an incharge of different shops at different times. Such as Engine assembly
Shop, paint shop, Quality control and Phosphating plant.
5. Worked as an Executive vendor development cell by co-ordination with Q.C and
Vendors regarding parts quality and prices. Process the Purchase orders and vendor
payment precedes sheets as per MIR.
Note: I was attending internal audit of store and different shops as per checklist for
making smooth and transparent system of Company by ISO-9000.
.
.

You might also like