0550 sheet steels ("Steel" 1993) are manufactured by cold
reducing mild sheet steels (!, = 300 MPa) to thicknesses which
range from 0.42-1.0 mm. Cold reduction produces large deformations of the grain structure which cause an increase in yield stress and ultimate strength, and a decrease in ductility. 0550 sheet steels (0.48 mm ::s; t ::s; 0.75 mm) have recently been introduced fo0550 sheet steels ("Steel" 1993) are manufactured by cold reducing mild sheet steels (!, = 300 MPa) to thicknesses which range from 0.42-1.0 mm. Cold reduction produces large deformations of the grain structure which cause an increase in yield stress and ultimate strength, and a decrease in ductility. 0550 sheet steels (0.48 mm ::s; t ::s; 0.75 mm) have recently been introduced for use as structural members in the Australian residential constr0550 sheet steels ("Steel" 1993) are manufactured by cold reducing mild sheet steels (!, = 300 MPa) to thicknesses which range from 0.42-1.0 mm. Cold reduction produces large deformations of the grain structure which cause an increase in yield stress and ultimate strength, and a decrease in ductility. 0550 sheet steels (0.48 mm ::s; t ::s; 0.75 mm) have recently been introduced for use as structural members in the Australian residential construction industry, as well as for panel and deck sections in other types of building construction (Hancock and Murray 1996). The use of 0550 sheet steels has been restricted to nonstructural applications in most countries due to concerns regarding the ductility of members and connections. Comparable ASTM sheet steels0550 sheet steels ("Steel" 1993) are manufactured by cold reducing mild sheet steels (!, = 300 MPa) to thicknesses which range from 0.42-1.0 mm. Cold reduction produces large deformations of the grain structure which cause an increase in yield stress and ultimate strength, and a decrease in ductility. 0550 sheet steels (0.48 mm ::s; t ::s; 0.75 mm) have recently been introduced for use as structural members in the Australian residential constr0550 sheet steels ("Steel" 1993) are manufactured by cold reducing mild sheet steels (!, = 300 MPa) to thicknesses which range from 0.42-1.0 mm. Cold reduction produces large deformations of the grain structure which cause an increase in yield stress and ultimate strength, and a decrease in ductility. 0550 sheet steels (0.48 mm ::s; t ::s; 0.75 mm) have recently been introduced for use as structural members in the Australian residential construction industry, as well as for panel and deck sections in other t0550 sheet steels ("Steel" 1993) are manufactured by cold reducing mild sheet steels (!, = 300 MPa) to thicknesses which range from 0.42-1.0 mm. Cold reduction produces large deformations of the grain structure which cause an increase in yield stress and ultimate strength, and a decrease in ductility. 0550 sheet steels (0.48 mm ::s; t ::s; 0.75 mm) have recently been introduced for use as structural members in the Australian residential construction industry, as well as for panel and deck sections in other types of building construction (Hancock and Murray 1996). The use of 0550 sheet steels has been restricted to nonstructural applications in most countries due to concerns regarding the duc0550 sheet steels ("Steel" 1993) are manufactured by cold reducing mild sheet steels (!, = 300 MPa) to thicknesses which range from 0.42-1.0 mm. Cold reduction produces large deformations of the grain structure which cause an increase in yield stress and ultimate strength, and a decrease in ductility. 0550 sheet steels (0.48 mm ::s; t ::s; 0.75 mm) have recently been introduced for use as structural members in the Australian residential construction industry, as well as for panel and deck sections in other types of building construction (Hancock and Murray 1996). The use of 0550 sheet steels has been restricted to nonstructural a0550 sheet steels ("Steel" 1993) are manufactured by cold reducing mild sheet steels (!, = 300 MPa) to thicknesses which range from 0.42-1.0 mm. Cold reduction produces large deformations of the grain structure which cause an increase in yield stress and ultimate strength, and a decrease in ductility. 0550 sheet steels (0.48 mm ::s; t ::s; 0.75 mm) have recently been introduced for use as structural members in the Australian residential constr0550 sheet steels ("Steel" 1993) are manufactured by cold reducing mild sheet steels (!, = 300 MPa) to thicknesses which range from 0.42-1.0 mm. Cold reduction produces large deformations of the grain structure which cause an increase in yield stress and ultimate strength, and a decrease in ductility. 0550 sheet steels (0.48 mm ::s; t ::s; 0.75 mm) have recently been introduced for use as structural members in the Australian residential construction industry, as well as for panel and deck sections in other types of building construction (Hancock and Murray 1996). The use of 0550 sheet steels has been restricted to nonstructural a0550 sheet steels ("Steel" 1993) are manufactured by cold reducing mild sheet steels (!, = 300 MPa) to thicknesses which range from 0.42-1.0 mm. Cold reduction produces large deformations of the grain structure which cause an increase in yield stress and ultimate strength, and a decrease in ductility. 0550 sheet steels (0.48 mm ::s; t ::s; 0.75 mm) have recently been introduced for use as structural members in the Australian residential construction industry, as well as for panel and deck sections in other types of building construction (Hancock and Murray 1996). 0550 sheet steels ("Steel" 1993) are manufactured by cold reducing mild sheet steels (!, = 300 MPa) to thicknesses which range from 0.42-1.0 mm. Cold reduction produces large deformations of the grain structure which cause an increase in yield stress and ultimate strength, and a decrease in ductility. 0550 sheet steels (0.48 mm ::s; t ::s; 0.75 mm) have recently been introduced for use as structural members in the Australian residential constr0550 sheet steels ("Steel" 1993) are manufactured by cold reducing mild sheet steels (!, = 300 MPa) to thicknesses which range from 0.42-1.0 mm. Cold reduction produces large deformations of the grain structure which cause an increase in yield stress and ultimate strength, and a decrease in ductility. 0550 sheet steels (0.48 mm ::s; t ::s; 0.75 mm) have recently been introduced for use as structural members in the Australian residential construction industry, as well as for panel and deck sections in other types of building construction (Hancock and Murray 1996). The use of 0550 sheet steels has been restricted to nonstructural a0550 sheet steels ("Steel" 1993) are manufactured by cold reducing mild sheet steels (!, = 300 MPa) to thicknesses which range from 0.42-1.0 mm. Cold reduction produces large deformations of the grain structure which cause an increase in yield stress and ultimate strength, and a decrease in ductility. 0550 sheet steels (0.48 mm ::s; t ::s; 0.75 mm) have recently been introduced for use as structural members in the Australian residential construction industry, as well as for panel and deck sections in other types of building construction (Hancock and Murray 1996). The0550 sheet steels ("Steel" 1993) are manufactured by cold reducing mild sheet steels (!, = 300 MPa) to thicknesses which range from 0.42-1.0 mm. Cold reduction produces large deformations of the grain structure which cause an increase in yield stress and ultimate strength, and a decrease in ductility. 0550 sheet steels (0.48 mm ::s; t ::s; 0.75 mm) have recently been introduced for use as structural members in the Australian residential constr0550 sheet steels ("Steel" 1993) are manufactured by cold reducing mild sheet steels (!, = 300 MPa) to thicknesses which range from 0.42-1.0 mm. Cold reduction produces large deformations of the grain structure which cause an increase in yield stress and ultimate strength, and a decrease in ductility. 0550 sheet steels (0.48 mm ::s; t ::s; 0.75 mm) have recently been introduced for use as structural members in the Australian residential construction industry, as well as for panel and deck sections in other types of building construction (Hancock and Murray 1996). The use of 0550 sheet steels has been restricted to nonstructural a0550 sheet steels ("Steel" 1993) are manufactured by cold reducing mild sheet steels (!, = 300 MPa) to thicknesses which range from 0.42-1.0 mm. Cold reduction produces large deformations of the grain structure which cause an increase in yield stress and ultimate strength, and a decrease in ductility. 0550 sheet steels (0.48 mm ::s; t ::s; 0.75 mm) have recently been introduced for use as structural members in the Australian residential construction industry, as well as for panel and deck sections in other types of building construction (Hancock and Murray 1996). The use of 0550 sheet steels has been restricted to nonstructural applications in most countries due to concerns regarding the ductility of members and connections. Comparable ASTM sheet steels, Orade E and Orade 550, are listed by the following standards: A611 ("Standard" 1994b), A653 ("Standard" 1994c), and A792 ("Standard" 1994d). Cold formed structural members are fabricated from sheet pplications in most countries due to concerns regarding the ductility of members and connections. Comparable ASTM sheet steels, Orade E and Orade 550, are listed by the following standards: A611 ("Standard" 1994b), A653 ("Standard" 1994c), and A792 ("Standard" 1994d). Cold formed structural members are fabricated from sheet uction industry, as well as for panel and deck sections in other types of building construction (Hancock and Murray 1996). The use of 0550 sheet steels has been restricted to nonstructural applications in most countries due to concerns regarding the ductility of members and connections. Comparable ASTM sheet steels, Orade E and Orade 550, are listed by the following standards: A611 ("Standard" 1994b), A653 ("Standard" 1994c), and A792 ("Standard" 1994d). Cold formed structural members are fabricated from sheet 0550 sheet steels ("Steel" 1993) are manufactured by cold reducing mild sheet steels (!, = 300 MPa) to thicknesses which range from 0.42-1.0 mm. Cold reduction produces large deformations of the grain structure which cause an increase in yield stress and ultimate strength, and a decrease in ductility. 0550 sheet steels (0.48 mm ::s; t ::s; 0.75 mm) have recently been introduced for use as structural members in the Australian residential construction industry, as well as for panel and deck sections in other types of building construction (Hancock and Murray 1996). The use of 0550 sheet steels has been restricted to nonstructural applications in most countries due to concerns regarding the ductility of members and connections. Comparable ASTM sheet steels, Orade E and Orade 550, are listed by the following standards: A611 ("Standard" 1994b), A653 ("Standard" 1994c), and A792 ("Standard" 1994d). Cold formed structural members are fabricated from sheet use of 0550 sheet steels has been restricted to nonstructural applications in most countries due to concerns regarding the ductility of members and connections. Comparable ASTM sheet steels, Orade E and Orade 550, are listed by the following standards: A611 ("Standard" 1994b), A653 ("Standard" 1994c), and A792 ("Standard" 1994d). Cold formed structural members are fabricated from sheet pplications in most countries due to concerns regarding the ductility of members and connections. Comparable ASTM sheet steels, Orade E and Orade 550, are listed by the following standards: A611 ("Standard" 1994b), A653 ("Standard" 1994c), and A792 ("Standard" 1994d). Cold formed structural members are fabricated from sheet uction industry, as well as for panel and deck sections in other types of building construction (Hancock and Murray 1996). The use of 0550 sheet steels has been restricted to nonstructural applications in most countries due to concerns regarding the ductility of members and connections. Comparable ASTM sheet steels, Orade E and Orade 550, are listed by the following standards: A611 ("Standard" 1994b), A653 ("Standard" 1994c), and A792 ("Standard" 1994d). Cold formed structural members are fabricated from sheet sheet steels ("Steel" 1993) are manufactured by cold reducing mild sheet steels (!, = 300 MPa) to thicknesses which range from 0.42-1.0 mm. Cold reduction produces large deformations of the grain structure which cause an increase in yield stress and ultimate strength, and a decrease in ductility. 0550 sheet steels (0.48 mm ::s; t ::s; 0.75 mm) have recently been introduced for use as structural members in the Australian residential construction industry, as well as for panel and deck sections in other types of building construction (Hancock and Murray 1996). The use of 0550 sheet steels has been restricted to nonstructural applications in most countries due to concerns regarding the ductility of members and connections. Comparable ASTM sheet steels, Orade E and Orade 550, are listed by the following standards: A611 ("Standard" 1994b), A653 ("Standard" 1994c), and A792 ("Standard" 1994d). Cold formed structural members are fabricated from sheet use of 0550 sheet steels has been restricted to nonstructural applications in most countries due to concerns regarding the ductility of members and connections. Comparable ASTM sheet steels, Orade E and Orade 550, are listed by the following standards: A611 ("Standard" 1994b), A653 ("Standard" 1994c), and A792 ("Standard" 1994d). Cold formed structural members are fabricated from sheet pplications in most countries due to concerns regarding the ductility of members and connections. Comparable ASTM sheet steels, Orade E and Orade 550, are listed by the following standards: A611 ("Standard" 1994b), A653 ("Standard" 1994c), and A792 ("Standard" 1994d). Cold formed structural members are fabricated from sheet uction industry, as well as for panel and deck sections in other types of building construction (Hancock and Murray 1996). The use of 0550 sheet steels has been restricted to nonstructural applications in most countries due to concerns regarding the ductility of members and connections. Comparable ASTM sheet steels, Orade E and Orade 550, are listed by the following standards: A611 ("Standard" 1994b), A653 ("Standard" 1994c), and A792 ("Standard" 1994d). Cold formed structural members are fabricated from sheet 0550 sheet steels ("Steel" 1993) are manufactured by cold reducing mild sheet steels (!, = 300 MPa) to thicknesses which range from 0.42-1.0 mm. Cold reduction produces large deformations of the grain structure which cause an increase in yield stress and ultimate strength, and a decrease in ductility. 0550 sheet steels (0.48 mm ::s; t ::s; 0.75 mm) have recently been introduced for use as structural members in the Australian residential construction industry, as well as for panel and deck sections in other types of building construction (Hancock and Murray 1996). The use of 0550 sheet steels has been restricted to nonstructural applications in most countries due to concerns regarding the ductility of members and connections. Comparable ASTM sheet steels, Orade E and Orade 550, are listed by the following standards: A611 ("Standard" 1994b), A653 ("Standard" 1994c), and A792 ("Standard" 1994d). Cold formed structural members are fabricated from sheet pplications in most countries due to concerns regarding the ductility of members and connections. Comparable ASTM sheet steels, Orade E and Orade 550, are listed by the following standards: A611 ("Standard" 1994b), A653 ("Standard" 1994c), and A792 ("Standard" 1994d). Cold formed structural members are fabricated from sheet tility of members and connections. Comparable ASTM sheet steels, Orade E and Orade 550, are listed by the following standards: A611 ("Standard" 1994b), A653 ("Standard" 1994c), and A792 ("Standard" 1994d). Cold formed structural members are fabricated from sheet ypes of building construction (Hancock and Murray 1996). The use of 0550 sheet steels has been restricted to nonstructural applications in most countries due to concerns regarding the ductility of members and connections. Comparable ASTM sheet steels, Orade E and Orade 550, are listed by the following standards: A611 ("Standard" 1994b), A653 ("Standard" 1994c), and A792 ("Standard" 1994d). Cold formed structural members are fabricated from sheet uction industry, as well as for panel and deck sections in other types of building construction (Hancock and Murray 1996). The use of 0550 sheet steels has been restricted to nonstructural applications in most countries due to concerns regarding the ductility of members and connections. Comparable ASTM sheet steels, Orade E and Orade 550, are listed by the following standards: A611 ("Standard" 1994b), A653 ("Standard" 1994c), and A792 ("Standard" 1994d). Cold formed structural members are fabricated from sheet , Orade E and Orade 550, are listed by the following standards: A611 ("Standard" 1994b), A653 ("Standard" 1994c), and A792 ("Standard" 1994d). Cold formed structural members are fabricated from sheet uction industry, as well as for panel and deck sections in other types of building construction (Hancock and Murray 1996). The use of 0550 sheet steels has been restricted to nonstructural applications in most countries due to concerns regarding the ductility of members and connections. Comparable ASTM sheet steels, Orade E and Orade 550, are listed by the following standards: A611 ("Standard" 1994b), A653 ("Standard" 1994c), and A792 ("Standard" 1994d). Cold formed structural members are fabricated from sheet r use as structural members in the Australian residential construction industry, as well as for panel and deck sections in other types of building construction (Hancock and Murray 1996). The use of 0550 sheet steels has been restricted to nonstructural applications in most countries due to concerns regarding the ductility of members and connections. Comparable ASTM sheet steels, Orade E and Orade 550, are listed by the following standards: A611 ("Standard" 1994b), A653 ("Standard" 1994c), and A792 ("Standard" 1994d). Cold formed structural members are fabricated from sheet