You are on page 1of 4

CCA-1200 Cross Conveyor

UK: T: +44 1904 608 999 E: sales@sheppee.com China: T: +86 755 8222 5976 E: sales@si-ap.com www.sheppee.com
The design of the cross conveyor has a major inuence in the overall ware handling efciency.
Cross conveyors work in the most difcult conditions with wear and tear being common due to
the nature of the mechanical design. The CCA-1200 has many in-built features, which allow for
critical areas to be adjusted during a normal production run. Having this ability reduces fallen
ware and is essential for accurate lehr loading and improved production efciencies.
Features and Benets
Simple robust construction
Individual deadplate assembly with both tilt and lift
feature
Adustable transfer deadplate, idle roller and wear
plate
Full adjustment of height and linear position of
conveyor beams
Quick interchangeable deadplates
Ability to counteract heat distortion
Low and simple maintenance
Safe and reliable operation
Consistent and trouble free container handling
Can be used in conjunction with Sheppee ware
handling system
Suitable for any lehr width
Quick change wear strips
This page folds in
UK: T: +44 1904 608 999 E: sales@sheppee.com China: T: +86 755 8222 5976 E: sales@si-ap.com www.sheppee.com
CCA-1200 Cross Conveyor
Conveyor Chain

ALLGUARD FX
Link spacer conveyor chain
(Recommended standard
for containers 40mm
diameter and above)

Lifeguard *
All link conveyor chain
(Recommended for
containers less than 40mm
diameter)


*Additional cost
Technical Specication
Drive Requirements:
For use with customers synchronous or servo motor or integrated with Sheppee ware handling system.
Service Requirements:
Connection to Lincoln centralised lubrication system (if applicable).
www.sheppee.com
CCA-1200 Cross Conveyor
CCA-1200 Drawings
Deadplate Adjust Floor Mounted Legs
Idle Roller Side
CCA-1200 Cross Conveyor
UK: Halifax Way, Aireld Business Park, Elvington, York, YO41 4AU
T: +44 1904 608 999 F: +44 1904 608 777
E: sales@sheppee.com
China: Sheppee-AP Sales & Support Centre, Shenzhen, China,
T: +86 755 8222 5976 E: sales@si-ap.com
www.sheppee.com
Consumables
Part Number: Description:
CC/046 Deadplate
CC/238 Idler Sprocket
CCA/1150-FEV Idle Sprocket
Assembly
C315-6206HT Bearing
Part Number: Description:
CC/239 Shaft
CC/304 Transfer
Deadplate
CC/439 Transfer
Deadplate*
(*when running with a VFT-1000 transfer)
For additional parts refer to assembly drawings.
V1.0

You might also like