For the "plus" in water quality - the compact ozone system, highly effective and environmentally sound. din-o-zon VARIO V2, Capacity: 2 g/h ozone, Compact system Art. no.: 0610-341-90 The din-o-zon method eliminates microorganisms and disintegrates organic impurities in a safe and environmentally sound way. The consumption of disinfectants is reduced, the water quality is considerably improved. The typical swimming pool smell is reduced. Due to the fact that the ozone is generated on site, there are no additional transport costs involved and there is no need for storage of further chemicals. Ozone is the most effective disinfectant in the are of pool water treatment, and is obtained from aerial oxygen. The efficiency is clearly demonstrated by the immediate oxidation of bacteria and organic substances. What's more, the use of ozone does not contribute to the greenhouse effect. Brief description din-o-zon VARIO V2 complete systems for elimination of microorganisms and a further disintegration of organic impurities using the slip-stream process. Compact construction with switch cabinet, ozone generator, mixing module, injector with diaphragm check valve and second ball check valve, reaction tank incl. mixing device, automatic ventilation, residual ozone destructor with booster pump and connection set, accessories kit incl. initial filling of activated charcoal, pre- assembled at the factory on stable plastic chassis with adjustable feet, completely wired electrically and ready for operation. A gas detector is not required. Fulfills the requirements of DIN 19627 Description
Ozone generator Ozone output: 2 g/h Current consumption: 0.125 kW Booster pump: IN-V 2-40 Pump capacity: 4 m/h Current consumption: max. 0.55 kW Motor power: 0.55 kW Circulation volume: approx. 4 m/h Overall electrical connection: approx. 0.8 kW Supply voltage: 220-240 V / 50Hz, 1.1 kW Dimensions (h x w x d): 1280 x 540 x 420 mm Weight: approx. 55 kg Technical data Ecological and safety-conscious production of ozone from atmospheric oxygen for use in the treatment of pool water as support the maintenance and safeguarding of the quality of the hygiene parameters (TVO, 11 UBA). Suitable for private or hotel pools / whirlpools up to a circulation capacity of 150 m/h Dosing Direct integration of the ozone system in the main filtration circulation according to the bypass principle. Fully automatic treatment with ozone. Use Product information Ozone technology / UV technology There are no waste products that require disposal. Disposal No handling of or contact with hazardous materials required. Low energy input. Easy installation on site. Minimum space requirements. No gas detector required! Safety Electrical mains supply and cable installation / water supply / floor drain in installation room / ventilation and de-aeration of installation room / permissible room temperature min. +10 C up to max. + 40 C. Additional Information The ozone system must be stores upright and in a dry and clean place. Storage instructions 0610-355-00 Dosing point with ball valve FPM 0610-354-00 Armstrong air vent for OZONE, 0610-353-00 Venturi injector, type 25152 0610-342-90 Reaction vessel complete Spare parts dinotec GmbH Water and Pool Technology Spessartstrasse 7 63477 Maintal/Germany Tel: Fax: Hotline: E-Mail: Internet: +49(0)6109-6011-0 +49(0)6109-6011-90 +49(0)6109-6011-72 mail@dinotec.de www.dinotec.de Subject to technical changes. Errors excepted. Photo of item may be different. Do you have any questions? Our hotline will be happy to help. Status: 22.05.14