Roof opening panel is an electronically operated glass panel that has one-touch open, one-touch close and one-touch vent features. If an obstacle has been detected in the roof opening panel as the sliding glass is closing, it will automatically open and stop at a predetermined position.
Roof opening panel is an electronically operated glass panel that has one-touch open, one-touch close and one-touch vent features. If an obstacle has been detected in the roof opening panel as the sliding glass is closing, it will automatically open and stop at a predetermined position.
Roof opening panel is an electronically operated glass panel that has one-touch open, one-touch close and one-touch vent features. If an obstacle has been detected in the roof opening panel as the sliding glass is closing, it will automatically open and stop at a predetermined position.
Security Override Roof Opening Panel To override a bounce-back condition (to overcome The roof opening panel consists of the following: the resistance of ice on the roof opening panel seal for example), within 2 seconds of a bounce-back Air deflector event, pull and hold the SLIDE or TILT control Roof opening panel drain hose switch. The closing force will begin to increase Roof opening panel frame each time the roof opening panel is closed for the Roof opening panel glass first 3 closing cycles (bounce-back will still be enabled). Roof opening panel glass seal Roof opening panel motor and module assembly Roof opening panel shield (sun shade) Roof opening panel shield guide feet Roof opening panel switch Roof opening panel trough Roof opening panel trough guides Skid plates Trim lace Roof Opening Panel Operation The roof opening panel assembly uses an integrated motor and module to operate the roof opening panel. The roof opening panel is an electronically operated glass panel that has one-touch open, one-touch close and one-touch vent features. To vent the roof opening panel, the roof opening panel must first be in the CLOSED position. Press and release the TILT control switch. The roof opening panel will move to the VENT position automatically. To close the roof opening panel from the VENT position, pull and hold the TILT control switch until the glass panel stops moving. To open the roof opening panel, press and release the SLIDE control switch. The roof opening panel will open automatically. The roof opening panel movement can be stopped at any time by pressing the switch again. To close the roof opening panel, pull and release the SLIDE or TILT control switch. The roof opening panel will close automatically. The roof opening panel movement can be stopped at any time by pressing the switch again. Bounce-Back The roof opening panel has a bounce-back feature. If an obstacle has been detected in the roof opening panel as the sliding glass is closing, the roof opening panel will automatically open and stop at a predetermined position. Copyright 2008, Ford Motor Company Last updated: 8/13/2008 2009 Explorer, Mountaineer, Explorer Sport Trac, 12/2008 501-17-2 501-17-2 Roof Opening Panel DESCRIPTION AND OPERATION (Continued) Roof Opening Panel Drain Hose Routing Explorer NOTE: RH side shown, LH side similar. 2009 Explorer, Mountaineer, Explorer Sport Trac, 12/2008 501-17-3 501-17-3 Roof Opening Panel DESCRIPTION AND OPERATION (Continued) Roof Opening Panel Drain Hose Routing Explorer Sport Trac NOTE: RH side shown, LH side similar. 2009 Explorer, Mountaineer, Explorer Sport Trac, 12/2008