Professional Documents
Culture Documents
ABSA
AICHE
ANSI
ANSI
ANSI
API A.
API B.
API C.
API C.
API C.
API C.
API C.
API C.
API C.
API C.
API C.
API C.
API C.
API C.
API C.
API C.
API C.
API C.
API C.
API C.
API C.
API C.
API C.
API C.
API D.
API E.
API E.
API E.
API F.
API F.01
API F.01
API F.01
API F.02
API F.02
API F.02
API F.02
API F.02
API F.02
API F.02
API F.02
API F.02
API F.02
API F.02
API F.02
API F.02
API F.02
API F.02
API F.02
API F.02
API F.03
API F.04
Code or Standard
Alberta Boilers Safety Association
K61.1 Safety Requirements for the Storage and Handling of Anhydrous Ammonia
@ Interpretations
@ Exploration & Production
@ Petroleum Measurement (Manual of Petroleum Measurement Standards)
Chapter 1, Vocabulary
Chapter 10, Sediment and Water
Chapter 11, Physical Properties Data (Volume Correction Factors)
Chapter 12, Calculation of Petroleum Quantities
Chapter 13, Statistical Aspects of Measuring and Sampling
Chapter 14, Natural Gas Fluids Measurement
Chapter 15, Guidelines for Use of the International System of Units (SI) in the Petroleum and Allied Industries
API F.02
API F.02
API F.02
API F.02
API F.02
API F.02
API F.02
API F.02
API F.02
API F.02
API F.03
API F.04
API F.04
API F.04
API F.04
API F.04
API F.04
API F.04
API F.04
API F.05
API F.05
API F.05
API F.05
API F.05
API F.05
API F.05
API F.05
API F.05
API F.05
API F.05
API F.05
API F.05
API F.05
API F.06
API F.06
API F.06
API F.06
API F.07
API F.07
API F.07
API F.07
API F.07
API F.07
API F.07
API F.07
API F.07
API F.07
API F.07
API F.07
API F.08
API F.08
API F.08
API F.08
API F.08
API F.08
API F.08
API F.08
API F.09
API F.10
API F.11
API F.11
API F.11
API F.11
API F.11
Std 617, Centrifugal Compressors for Petroleum, Chemical and Gas Industry Services
Std 618, Reciprocating Compressors for Petroleum, Chemical and Gas Industry Services
Std 619, Rotary-Type Positive Displacement Compressors for Petroleum, Chemical, and Gas Industry Services
Std 672, Packaged, Integrally Geared Centrifugal Air Compressors for Petroleum, Chemical, and Gas Industry Servic
Std 674, Positive Displacement PumpsReciprocating,
Std 675, Positive Displacement PumpsControlled Volume
Std 676, Positive Displacement PumpsRotary
Std 681, Liquid Ring Vacuum Pumps and Compressors
Std 682, Shaft Sealing Systems for Centrifugal and Rotary Pumps
Std 685, Sealless Centrifugal Pumps for Petroleum, Heavy Duty Chemical, and Gas Industry Services
@ Storage Tanks
@ Pressure Relieving Systems for Refinery Service
RP520 - Sizing, Selection & Installation of Pressure Relieving Devices in Refineries, Part II (Installation)
RP520 - Sizing, Selection & Installation of Pressure Relieving Devices in Refineries, Part II (Installation)
RP521 - Guide for Pressure-Relieving & Depressuring Systems
RP576 - Inspection of Pressure Relieving Devices
Std 2000, Venting Atmospheric and Low-Pressure Storage Tanks: Nonrefrigerated and Refrigerated
Std 526, Flanged Steel Pressure Relief Valves
Std 527, Seat Tightness of Pressure Relief Valves
@ Piping Component Standards
API 574 Inspection Practices for Piping System Components
RP 578, Material Verification Program for New and Existing Alloy Piping Systems
RP 591, User Acceptance of Refinery Valves,
Std 589, Fire Test for Evaluation of Valve Stem Packing
Std 594, Check Valves: Wafer, Wafer-Lug and Double Flanged Type
Std 598, Valve Inspection and Testing
Std 599, Metal Plug ValvesFlanged and Welding Ends,
Std 600, Steel Gate ValvesFlanged and Butt-Welding Ends, Bolted and Pressure Seal Bonnets
Std 602, Compact Steel Gate ValvesFlanged, Threaded, Welding, and Extended Body Ends
Std 603, Class 150, Cast, Corrosion-Resistant, Flanged-End Gate Valves
Std 607, Fire Test for Soft-Seated Quarter-Turn Valves
Std 608, Metal Ball ValvesFlanged, Threaded and Butt-Welding Ends
Std 609, Butterfly Valves: Double Flanged, Lug- and Wafer-Type
@ Electrical Installations and Equipment
RP 500, Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facil
RP 505, Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facil
Std 541, Form-Wound Squirrel-Cage Induction Motors250 Horsepower and Larger
@ Heat Transfer Equipment Standards for Refinery Service
Publ 534, Heat Recovery Steam Generators
Publ 535, Burners for Fired Heaters in General Refinery Services
RP 531M, Measurement of Noise from Fired Process Heaters
RP 536, Post Combustion NOx Control for Equipment in General Refinery Services
RP 573, Inspection of Fired Boilers and Heaters
Std 530, Calculation of Heater Tube Thickness in Petroleum Refineries
Std 560, Fired Heaters for General Refinery Services
Std 660, Shell-and-Tube Heat Exchangers for General Refinery Services
Std 661, Air-Cooled Heat Exchangers for General Refinery Service
Std 662, Plate Heat Exchanger Specification Sheets in Electronic Format, Plate Heat Exchangers for General Refinery Se
Std 662, Plate Heat Exchangers for General Refinery Services
@ Instrumentation and Control Manuals
API 555, Process Analyzers
RP 551, Process Measurement Instrumentation
RP 552, Transmission Systems
RP 553, Refinery Control Valves
RP 554, Process Instrumentation and Control
RP 556, Fired Heaters & Steam Generators
RP 557, Guide to Advanced Control Systems
@ Technical Data Book Petroleum Refining
@ Characterization and Thermodynamics (of petroleum fractions)
@ Material Engineering Publications
Publ 935, Thermal Conductivity Measurement Study of Refractory Castables
Publ 939, Research Report on Characterization and Monitoring of Cracking in Wet H2 S Service
Publ 946, The Effect of Outgassing Cycles on the Hydrogen Content in Petrochemical Reactor-Vessel Steels
Publ 950, Survey of Construction Materials and Corrosion in Sour Water Strippers
API F.08
API F.08
API F.08
API F.08
API F.08
API F.09
API F.10
API F.11
API F.11
API F.11
API F.11
API F.11
API F.11
API F.11
API F.11
API F.11
API F.12
API F.12
API F.12
API F.13
API F.13
API F.13
API F.13
API F.13
API F.13
API F.14
API G.
API G.01
API G.01
API G.01
API G.01
API G.01
API G.01
API G.01
API G.01
API G.01
API G.01
API G.01
API G.01
API G.01
API G.01
API G.01
API G.01
API G.01
API G.01
API G.01
API G.01
API G.02
API G.02
API G.02
API G.02
API G.02
API G.02
API H.
API H.
API H.
API H.
API H.
API H.
API H.
API I.
API I.
API I.
API I.
Publ 950, Survey of Construction Materials and Corrosion in Sour Water Strippers
RP 934, Materials and Fabrication Requirement for 2-1/4Cr-1MO & 3Cr-1Mo Steel Heavy Wall Pressure Ves
RP 936, Refractory Installation Quality Control Guidelines
RP 941, Steels for Hydrogen Service at Elevated Temperatures and Pressures in Petroleum Refineries and Petrochemical P
RP 945, Avoiding Environmental Cracking in Amine Units
@ Petroleum Products and Petroleum Product Surveys
Publ 4261, Alcohols and Ethers: A Technical Assessment of Their Application as Fuels and Fuel Componen
Std 1512, Petroleum Test Laboratory Accreditation Program
@ Health, Environment and Safety
Publ 421, Management of Water Discharges: Design and Operation of Oil-Water Separators
Publ 422, Groundwater Protection Programs for Petroleum Refining and Storage Facilities: A Guidance Docume
Publ 800, Literature Survey: Subsurface and Groundwater Protection Related to Petroleum Refinery Operations
Publ 958, Pilot Studies on the Toxicity of Effluents from Conventional and Carbon Enhanced Treatment of Refinery Wastew ater-Ph
Publ 2021A, Interim StudyPrevention and Suppression of Fires in Large Aboveground Atmospheric Storage Tank
API G.02
API H.
API H.
API H.
API H.
API H.
API H.
API H.
API I.
API I.
API I.
API I.
API J.
API J.
API K.
API K.01
API K.01
API K.02
API K.03
API K.04
API K.05
API K.05
API K.05
API K.06
API K.07
API K.08
API K.09
API K.09
API K.09
API K.09
API K.09
API K.09
API K.09
API K.09
API K.09
API K.09
API K.09
API K.09
API K.09
API K.10
API L.
API M.
API N.
API O.
ASA
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
Publ 4610, Critical Review of Draft EPA Guidance on Assessment and Control of Bioconcentratable Contaminants in Surface Wate
Publ 4633, Barium in Produced Water: Fate and Effects in the Marine Environment
Publ 4663, Remediation of Salt-Affected Soils at Oil and Gas Production Facilities
Publ 4666, The Toxicity of Common Ions to Freshwater and Marine Organisms
Publ 4676, Arsenic: Chemistry, Fate, Toxicity, and Wastewater Treatment Options
Publ 4688, Temporary Treatment Options for Petroleum Distribution Terminal Wastewaters
Publ 4694, Laboratory Analysis of Petroleum Industry Wastewaters
Publ 4695, Understanding and Preparing Applications for Petroleum Facility NPDES Discharge Permits
Publ 4698, A Review of Technologies to Measure the Oil and Grease Content of Produced Water from Offsho
@ Waste Research
@ Subscriptions and Information Technology Products
@ Policy and Economic Studies
@ Public Affairs and Information
@ Out of Print Publications
A112 "Plumbing, flor and roof drains" etc
A120.1 Safety Requirements for Powered Platforms for Buidling Maintenance
A13.1 Scheme for the Identification of Piping Systems (Identifying piping contents & hazards therof, etc)
A17 "Elevators & Escalators" etc
A18 Safety Standard for Platform Lifts & Stairway Chairlifts
A90 .1 Safety Standard for Belt Manlifts
AG-1 Code on Nuclear Air & Gas Treatment
B1 "Screw Threads" etc
B107 "Hammers and other tools" etc
B133 .4 Gas Turbine Control & Protection Systems
B133.10 Procurement Standard for Gas Turbine Information to be Supplied by User and Manufacturer
B133.11 Procurement Standard for Gas Turbine Preparation for Shipping & Installation
B133.16 Procurement Standard for Gas Turbine Marine Applications
B133.2 Procurement Standard for Gas Turbine Maintenance & Safety
B133.3 Procurement Standard for Gas Turbine Auxiliary Equipment
B133.7M Gas Turbine Fuels
B133.8 Gas Turbine Installation Sound Emissions
B133.9 Measurement of Exhaust Emissions from Stationary Gas Turbine Engines
B15 .1 Safety Standard for Mechanical Power Transmission Apparatus
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASME
ASTM
CCME
CSA
CSA
CSA
CSA
CSA
CSA
DOT
EPA
EPRI
HEI
ISA?
MSS
NACE
NACE
National Emission Guidelines for Stationary Combustion Turbines - Canadian Council of Ministers of the Environment (CCME)
CSA
CSA
CSA
DOT
EPA
EPRI
HEI
ISA?
MSS
B51.95 Part 3, Requirements for CNG Refuelding Stqation Presure Piping Systems and Ground Storage
B52.95 Mechanical Refrigeration Code
Z662-1994 Oil and Gas Pipeline Systems
Regulations Governing the Transportation of Haaardous Materials in Tank Motor Vehicles
NACE
NACE
NACE
NACE
NACE
NACE
NACE
NACE
NACE
NACE
NACE
NACE
NACE
NACE
NACE
NACE
NACE
NACE
NACE
NACE
NACE
NACE
NACE
NACE
NACE
NACE
NACE
NACE
NACE
NACE
NACE
NACE
NACE
NACE
NACE
NACE
NACE
NACE
NACE
NACE
NACE
NACE
NACE
NACE
NACE
NACE
NACE
NACE
NACE
NACE
NACE
NACE
NACE
NACE
5/SSPC-SP 12 Surface Preparation of Steel and Other Hard Materials by High- and Ultrahigh-Pressure Water Jetting Prior to
Recoating
NACE
NACE
NACE
NACE
NACE
NACE
NACE
NACE
NACE
NACE
NACE
NACE
NEMA
NFPA
NFPA
NFPA
NFPA
NFPA
NFPA
NFPA
NFPA
NFPA
OSHA
TEMA
NFPA
NFPA
NFPA
NFPA
NFPA
NFPA
NFPA
NFPA
NFPA
11
12
13
14
17
20
22
24
58
Abbreviations:
ASME = American Society of Mechanical Engineers
ANSI = American National Standards Institute (w orks w ith over 175 organizations to approve their standards) (eg: ANSI has approved m
ASTM = American Standard Testing Materials?
HEI = Heat Exchange Institute
TEMA = Thermal Exchanger Manufacturers Association?
API = American Petroleum Institute
NACE International = National Association of Corrosion Engineers International
ISA = Instrument Society of America? International Society for Measurement and Control?
CSA = Canadian Standards Association
PTC = Performance Test Code
Abbreviations:
ASME = American Society of Mechanical Engineers
ANSI = American National Standards Institute (w orks w ith over 175 organizations to approve their standards) (eg: ANSI has approved m
ASTM = American Standard Testing Materials?
HEI = Heat Exchange Institute
TEMA = Thermal Exchanger Manufacturers Association?
API = American Petroleum Institute
NACE International = National Association of Corrosion Engineers International
ISA = Instrument Society of America? International Society for Measurement and Control?
CSA = Canadian Standards Association
PTC = Performance Test Code
OSHA = Occupational Safety and Health Administration
ASME "Codes and Standards by Designator Code"
BPVC = AMSE Boiler & Pressure Vessel Code
ASA = American Standards Association (fittings, plumbing etc)
AWWA
AWS (American Welding Society)
ABSA = Alberta Boilers Safety Association
API 610, 1984 said there exists API 5L specification for line pipe ??? Find out about that...
Comments
SI units used w hen provided for in
codes
s Ammonia
ABSA
dards)
meter proving
cilities
2001
Cost
ndustry Services
s Industry Services
ng Systems
nery Services
es
tables
cking in Wet H2 S Service
er Strippers
tables
cking in Wet H2 S Service
er Strippers
r-1Mo Steel Heavy Wall Pressure Vessels
Oil-Water Separators
d Storage Facilities: A Guidance Document
e Open Air
oleum Industry
am
osses
equip
Re electroinic and pneumatic controls
Not a procurment spec
Implementation & ow enership, 2000, 1
ed
Prpoerties data for simulations
osses
Offshore exploration
Environment
on Facilities
ganisms
ment Options
erminal Wastewaters
enance
ng contents & hazards therof, etc)
r and Manufacturer
ng & Installation
ine Engines
s
r and Manufacturer
ng & Installation
ine Engines
s
es?)
Process Industries
ng)
r Liquids
US$195
X country
Al fluids in chemical plant
CSA Z184
r Chemical Process
cal Process
Pumps for Chemical Process
ng Boilers
r Boilers
US$225
annual
1998?
US$225
ng Boilers
r Boilers
e Power Cycle
erator Units
or Units
its
Stream
US$95.00
its
US$95.00
Stream
nerator Operator
Nuclear
Incinerator Operators
ry Facility Operators
omponents
ition
Chemical Industries
dards
atural Gas
ping Systems and Ground Storage
ABSA
ABSA
ABSA
ABSA
ABSA
ABSA
ABSA
ABSA
ABSA
ABSA
ABSA
ipelines
ed Metallic Piping Systems
nitic Alloys from Polythionic Acid Stress
iated with Petroleum Production
n Metallic Structures and Corrosion Control
uction Equipment
Storage Tank Bottoms
d Surfaces of Steel Water Storage Tanks
eproofing Materials--A Systems Approach
els
ressed Current Deep Groundbeds
rrection of Deaerator Cracking
rpretation of Test Data in Oilfield Operations
t
hore Operations
m Product Pipelines
ction Using Membrane Filters
ABSA
ABSA
hore Operations
m Product Pipelines
ction Using Membrane Filters
otection
m Gases
ontrol?
ABSA
ABSA
ontrol?