Professional Documents
Culture Documents
Rugasol-3W Paste
3.2003
Rugasol-3W Paste
Surface Retarder for Exposed Aggregate Concrete
Description
Uses
Rugasol-3W Paste is a surface retarder for steel, wooden and plastic shutterings. Its fields of
application are:
Exposed aggregate concrete
As mechanical key in vertical and horizontal construction joints for subsequent layers of
concrete
In precast concrete production where exposed aggregate finish is required
If necessary trials are carried out and granulometry of aggregates are adjusted accordingly, fair faced in situ cast concrete may also be produced with exposed aggregate
finish
Pre-treatment of contact areas which will receive a rendering or screed at a later stage
(testing necessary with regard to bonding of rendering)
Advantages
Rugasol-3W Paste contains retarding substances which prevent a normal setting of the top
layer. Due to this effect the top layer can be removed by water pressure > 100 bar. Further
beneficial properties are:
Reduced labour costs
Suitable for steel, wooden and plastic shutterings
Inexpensive formwork can be used
Solvent-free
Non-hazardous
Technical Data
Type
Polyhydroxy Compound
Colour
Reddish paste
Density
1.03 kg/l
Storage
Shelf life
Packaging
10 kg pails
(non-returnable),
The information, and, in particular, the recommendations relating to the application and end-use of Sika products,
are given in good faith based on Sikas current knowledge and experience of the products when properly stored,
handled and applied under normal conditions within their shelflife. In practice, the differences in materials, substrates and actual site conditions are such, that no warranty in respect of merchantability or of fitness for a
particular purpose, nor any liability arising out of any legal relationship whatsoever, can be inferred either from
this information, or from any written recommendations, or from any other advice offered. The proprietary rights
of third parties must be observed. All orders are accepted subject to our current terms of sale and delivery. Users
should always refer to the most recent issue of the Technical Data Sheet for the product concerned, copies of
which will be supplied on request or can be accessed in the Internet under www.sika.ch/bauchemie.
Page 2 of 2
Rugasol-3W Paste
Application
Coverage
Application temperature
Application
Cleaning
Important
The successful production of exposed aggregate finish depends on various factors. Such
work should only be carried out by specialists after extensive trials. Formwork treated with
Rugasol-3W Paste must be cleaned thoroughly before it is used again.
Safety Instructions
Safety precautions
Ecology
Toxicity
Transport
Non-hazardous.
Sika Schweiz AG
P.O. Box 1300
CH-8048 Zrich
Phone +41 1 436 40 40
Telefax +41 1 436 45 55
E-Mail: ch-export@ch.sika.com