Professional Documents
Culture Documents
Ports
Connector type
PCIe
PCIe x8
16G FC/
10GbE
PORT 2
>
1
>
PORT 1
210-06236+A0
The ports in the preceding illustration are labeled a and b because Data ONTAP identifies ports alphabetically. The physical
ports are labeled Port 1 for Port a and Port 2 for Port b.
Port a is shown empty, as used with SFP+ copper cables. Port b is shown with an SFP+ optical module installed, as used with
LC fiber cables. Supported SFP+ optical modules are available separately: X6602A-R6 (16Gb FC), and X6600A-R6 (10GbE).
LED 0
Off
Off
LED 1
Off
LED 2
Flashing amber
LED
legend
FCoE/Ethernet mode
Power on,
no link
Power on, 10
Gbs link up,
no activity
Green
Green
Flashing green
Off
Off
Green
Flashing green
Off
Off
Off
Green
Green
For supported platform models and slot assignment, see the Hardware Universe at hwu.netapp.com.
Specific information about installing this card in your platform can be found in the PCIe replacement flyer for your platform at
support.netapp.com/documentation/productsatoz/index.html.
Configuration resources
You can refer to the following documentation available at support.netapp.com when configuring the X1143A-R6 card for your
specific release of Data ONTAP:
Data ONTAP Network Management Guide for 7-Mode or Clustered Data ONTAP Network Management Guide.
Data ONTAP SAN Administration Guide for 7-Mode or Clustered Data ONTAP SAN Administration Guide.
Data ONTAP SAN Configuration Guide for 7-Mode or Clustered Data ONTAP SAN Configuration Guide.
If you cannot access support.netapp.com, contact technical support at +1 (888) 463-8277 (North America), +00 800 44 638 277
(Europe), or +800 800-80-800 (Asia/Pacific) for help.
2
Specifications for the X1143A-R6 Dual-Port, 16Gb FC, 10GbE/FCoE Converged Network Adapter