Professional Documents
Culture Documents
Introduction
You have updated a project plan with task progress information. However, keeping your
project plan up to date and on track also entails dealing with financial information. In this
lesson, you will manage project costs.
Managing a project's costs is an important aspect of controlling the project. Many
circumstances can necessitate updating the rates of resourcesemployees' salaries could
increase, prices of materials could rise or fall over time, different grades of materials
charging different rates could be utilized in the project, and so on. Such updates affect the
project's costs; therefore, monitoring the project's costs with the aid of any relevant
information is a good practice in order to successfully manage project costs.
1. Update Cost Rate Tables
Project has features that help you manage a project's costs. When multiple rates are to be
charged by resources working on tasks, or future rates need to be specified, the project plan
should be updated accordingly. In this topic, you will update cost rate tables.
Conditions vary during the course of a project. Employees' salaries could increase during the
course of a project. Costs of materials could rise or fall. Different grades of materials that
charge different rates could be used on tasks. Different rates could be charged by the same
resource on different tasks. In such cases, the project plan should be updated so that the
appropriate rates are charged for work done on tasks.
When multiple rates are to be charged by resources working on tasks, or future rates need to
be specified, the project plan should be updated accordingly. In this topic, you will update
cost rate tables.
Cost Rate Tables
Cost rate tables for a particular resource can be seen on the Costs tab of the Resource
Information dialog box. They store a resource's rates, and the date from which these rates
come into effect. Project provides cost rate tables for work and material resources, but not for
cost resources. There are five cost rate tables available per resourceA, B, C, D, and E. They
cannot be renamed and A is the default table. Each table contains 25 rows. They allow a
resource to charge different rates for various tasks. They can also be used to specify future
increases and decreases in rates.
The first row of every cost rate table holds the default rate, if a rate has been specified.
No effective date is associated with the default rate, so the Effective Date column
contains two dashes. You cannot set an effective date in this row.
d. Press Enter.
Set a different cost rate table in the Assignment Information dialog box.
a. Double-click the appropriate resource or task, corresponding to the
desired assignment, to display the Assignment Information dialog
box.
b. On the General page, from the Cost rate table drop-down list, select
the appropriate cost rate table.
c. Click OK.
2. Group Costs
You have updated cost rate tables in the project plan. You would like to display costs
arranged according to criteria of your specification. In this topic, you will group costs.
As your project progresses, you may be called upon to report on its finances. To do this
effectively, you need to be aware of the project costs. Grouping costs by relevant criteria
helps you gain better insight into a project's costs. It also helps you determine whether costs
are within set limits, as well as identify the tasks or resources that have resulted in higher or
lower costs than expected, and so on.
You would like to display costs arranged according to criteria of your specification. In this
topic, you will group costs.
Groups
Groups are a method of organizing the information presented in a view according to specific
criteria. Applying a group to a view displays information in categories with summarized
information for each category. The groups available differ depending on the type of the
current viewtask groups for task views and resource groups for resource views. The More
Groups dialog box provides options to create new groups and edit existing groups.
respectively.
In the Group Definition table, specify the grouping criteria.
a. In the Field Name column, from the Field Name drop-down list
corresponding to Group By, select the desired column name.
b. If necessary, in the Order column, select Ascending or Descending to
sort results in ascending or descending order, respectively.
c. If necessary, in the remaining Then By rows of the Group Definition
table, specify more grouping criteria.
In the Group by setting for section, select the required Group By or Then By
row, and specify the desired font, cell background color, and pattern to be
applied to tasks or resources that match the grouping criteria.
6. If necessary, define group intervals for the selected grouping criterion.
a. Click Define Group Intervals to display the Define Group Interval dialog box.
b. Select appropriate values in the Group on drop-down list, and the Start at
and Group interval spin boxes.
Click OK to display the new group in the More Groups dialog box.
Click Apply to apply the new group to the current view.
Procedure Reference Group Costs Using the Customize Group By Dialog Box
To group costs using the Customize Group By dialog box:
1. Display the Cost table or insert the appropriate columns in the desired view.
2. Choose ProjectGroup by: No GroupCustomize Group By.
The name of the Group by submenu changes depending on the name of
the group that is currently in effect. By default, no group is in effect so the
name of the submenu is displayed as Group by: No Group.
3. In the Customize Group By dialog box, specify the desired settings for the custom
group.
4. If necessary, click Reset to clear all settings and start over.
5. If necessary, save the custom group and display it in the Group by submenu.
a. Click Save to launch the Save Group dialog box.
b. In the Name text box, type a suitable name.
c. Check the Show in menu check box and click OK.
6. In the Customize Group By dialog box, click OK to apply the custom group to the
current view.
Link Documents to a Project Plan
You have grouped costs by relevant criteria. For ease of understanding, you wish to provide
a document detailing budget types for reference. In this topic, you will link a document to
the project plan.
During the course of a project, situations may arise wherein you wish to incorporate
additional information into a project plan. This supplemental information could provide
clarity on the details of the project plan with respect to company guidelines. However, as
project plans generally contain a lot of information, keeping file size to a minimum is
desirable.
Having grouped costs by relevant criteria, you need to provide a document detailing budget
types for reference. In this topic, you will link a document to the project plan.
3.Hyperlinks
In Project, a hyperlink is an interactive icon that, when clicked, links to a location in the
current project plan, a file in its corresponding application, a web page in a browser, or a
new Message form in Outlook for an email address. Hyperlinks are displayed in the
Indicators column. Only one hyperlink can be attached to any task, resource, or assignment.
A default screentip is assigned to a hyperlink. However, a screentip of your choice can be
specified. Hyperlinks keep the project plan's file size to a minimum as they only store the
location of the object they link to.
Embed a File in a Project Plan
A file can be embedded in a project plan using the Insert Object dialog box. This
dialog box allows you to create a new file to embed, or embed a copy of an existing
file in the project plan, thereby increasing its file size. In the latter case, you can
choose to maintain a link between the embedded file and original file using the Link
check box. When a link is maintained, any changes saved in the embedded file are
updated in the source file and vice versa. The embedded file can be represented by an
icon corresponding to the appropriate file type if the Display As Icon check box is
checked.
How to Link Documents to a Project Plan
Procedure Reference Link a Document to a Project Plan Using Hyperlinks
To link a document to a project plan using hyperlinks:
1. Select the task, resource, or assignment to which a document is to be linked.
2. Display the Insert Hyperlink dialog box.
Right-click and choose Hyperlink.
Choose InsertHyperlink.
Or, press Ctrl+K.
3. Specify a location to link to.
Link to an existing file or web page.
a. Select Existing File or Web Page.
b. In the Look in section, browse for the desired file or web page.
c. Select the desired file or web page so that the path to it is displayed in
the Address text box.
Link to a location within the project plan.
a. Select Place in This Document.
b. From the Select a view in this project list box, select the appropriate
view.
c. In the Enter the task or resource ID text box, type a numeric value
indicating the task or resource to link to.
Or, link to a newly created document.
a. Select Create New Document.
b. In the Name of new document text box, type a suitable file name with
the appropriate file extension.
c. Click the Change button to browse to a different location in which the
document will be created.
d. Select Edit the new document later or Edit the new document now as
appropriate.
4. If necessary, set a custom screentip.
In the Text to display text box, type an appropriate screentip to replace the
default screentip.
Or, click ScreenTip and in the ScreenTip text text box, type the desired text
and click OK to add the desired text to the default screentip.
5. Click OK so that a hyperlink is displayed in the Indicators column for the particular
task, resource, or assignment.
6. Click the hyperlink to test it.
Edit a Hyperlink
An existing hyperlink can be edited through the Edit Hyperlink dialog box. This
dialog box can be accessed by right-clicking over the hyperlink and choosing
HyperlinkEdit Hyperlink.
References
1. Project Management Professional (PMP) Certification Preparation - (Second Edition),
by: Cynosure New Media, Inc.
|
2. Microsoft Office Project 2007 - Level 1
by: Mughil David and Aparna Venkatesan