Professional Documents
Culture Documents
is offering a wide range of compression fittings and saddles for highpressure conveyance of water, irrigation, gaseous fuels, compressed air, chemical solutions
and slurries. Fluids are reliably conveyed with no compromise for safety, convenience, quality
and system life.
NO
DESCRIPTION
MATERIAL
BODY
POLYPROPYLENE
O-RING
ELASTOMERIC RUBBER
INSERT
POLYPROPYLENE
SPLIT RING
POLYACETAL
NUT
POLYPROPYLENE
-1-
NO
DESCRIPTION
MATERIAL
POLYPROPYLENE
O-RING
ELASTOMERIC RUBBER
REINFORCING RING
STAINLESS STEEL
STAINLESS OR
GALVANIZED STEEL
-2-
MATERIALS
BODY, NUT & INSERT: Black high performance polypropylene copolymer PP-B with
excellent long-term pressure resistance and also high impact resistance compared to other
plastic materials. They also offer excellent weathering properties from degradation due to
ultra-violet radiation. Continuous use of all the black Elysee compression fittings above ground
is therefore permissible without additional protection.
SPLIT RING: The split ring is manufactured from high performance polyacetal material. The
stiffness and hardness of this provides high-end load resistance. Elysee compression fittings
can be used to join all types of polyethylene pipes and also HDPE PE100 class pipes, which are
considered to be the stiffer pipe material.
O-RING: The O-Ring is made from elastomeric rubber NBR 70. The material by which is
made off is able to withstand the higher service temperature up to 90 degrees Celsius that can
be met.
REINFORCING RING: Stainless steel made ring, suitable for female threaded type
compression fittings and saddles. Enable high strength and pressure resistance especially on
high diameters and threads where the above factors are particularly critical.
BOLTS & NUTS: Stainless or galvanized steel made, available on several diameters and
thickness for the optimum fit on each size of saddle.
THREADED PARTS
Where threaded parts either male or female are meet on the compression fittings and saddles;
the dimensions comply with the requirements of the international standards BS 21 and ISO 7.
OPERATING PRESSURE
Com pression Fittings:
Elysee Irrigation compression fittings are tested and approved on major standards such as:
DIN 8076-3 (DVGW) GERMANY
DIN 8076-3 (VGW) AUSTRIA
ISO 14236 INTERNATIONAL
Saddles:
18
16
from 16 mm
up to 63mm
14
PN 10
PN 16
12
10
from 75mm
up to 110mm
8
6
4
2
0
-40
-20
20
40
-4-
60
80
CHEMICAL RESISTANCE
Due to its structure polypropylene offers excellent chemical resistance. Elysee Compression
fittings and saddles may convey a wide variety of fluids. They are also suitable for explore
to sunlight (UV).
CHEMICALS
BENZENE
BRINE
SLAKED LIME
COMPRESSED AIR CONT. OIL
CAUSTIC SODA
FUEL OIL
HYDROCHLORIC ACID
NITRIC ACID DILUTE
CARBOLIC ACID
LUBE OILS
PHOSPORIC ACID
SULPHURIC CID DILUTE
-SUITABLE
O-RING (NBR
70)
~
X
X
X
X
~
X
X -UNSUITABLE
SPLIT RING
(ACETAL)
~ -MEDIUM RESISTANCE
X
X
LIFE EXPECTANCY
Based on the information available and the successful performance under the
nominated test regime, the life expectancy is rated at 50 years before replacement or
major rehabilitation. This rating is only a general guide to life expectancy and may increase
or decrease as a result of the quality of installation, system operating conditions, operating
environment and other geographical and site specific factors.
-5-
WARRANTY
All our products are warranted for a period of TWO (2) YEARS from the delivery
date. Our warranty includes repair or replacement of defective parts in our production plant
or in the after-sale service location. Replacement or repair of parts under this warranty will
not extend the warranty period of the original product, through such parts carry their own
warranty.
For this warranty to be effective, the buyer must certify the date of acquisition and
reception of the product.
For this warranty to be effective, the buyer must be strictly following the
manufacturers indications, when relevant to the product line and model purchased. No
warranties are given in regard to normal wear and tear due to use of the products.
Regarding fungible or consumable pieces, components and/or materials, the provision
contained in the accompanying documentation shall apply.
This warranty does not cover those cases in which the product:
Has been incorrectly handled
Has been repaired, maintained, or modified by an unauthorized person
Has been repaired or maintained with other than original pieces
Has been installed or placed in operation incorrectly
Excepting mandatory regulations to the contrary, the expenses for return and shipment
of defective materials shall be paid by the buyer. The present warranty is no way limits or
prejudices consumers rights under national mandatory regulations.
-6-