Professional Documents
Culture Documents
TM2246 - 670D, 672D, 770D, 772D, 870D, and 872D Motor Grader
Transmission Control Unit Calibration
Warm machine up to operating temperature. See Transmission Warm-Up Procedure . (Group 9020-25.)
2.
The display will give instructions and show the progress of the transmission calibration. The screen and transmission
calibration will proceed to the next step when the criteria is met for the current step. If a diagnostic trouble code is
generated during calibration, the procedure will be terminated. All diagnostic trouble codes must be corrected before
attempting to run calibration again. Calibration procedure will have to be restarted from the beginning.
file:///C:/ProgramData/Service%20ADVISOR/Temp/TM2246_09001faa8027a671.html
03/12/2014
Pgina 2 de 4
4.
Measurement
Specification
Engine
Speed
15801620 rpm
5.
6.
file:///C:/ProgramData/Service%20ADVISOR/Temp/TM2246_09001faa8027a671.html
03/12/2014
Pgina 3 de 4
7.
NOTE:
Do not depress the inching pedal at any time during the calibration procedure.
Automatic calibration has begun when Calibrating Please Wait appears on the display.
9.
10.
file:///C:/ProgramData/Service%20ADVISOR/Temp/TM2246_09001faa8027a671.html
03/12/2014
Pgina 4 de 4
11.
12.
T203472-19: Calibrating
Calibratingduring the final step, the TCU will use the information gathered during the calibration process to determine
new clutch engagement points.
13.
Move the shift handle back to Park and engine speed to slow idle.
15.
16.
Remove the transmission control unit calibration mode connector (X37) and install the transmission control unit run
mode connector (X39).
17.
LD30992,00000E7-19-20080717
file:///C:/ProgramData/Service%20ADVISOR/Temp/TM2246_09001faa8027a671.html
03/12/2014