Professional Documents
Culture Documents
constructive solutions
Technical support
Advantages
Application
Standards compliance
Concure WB309 complies with ASTM C309 as a Type 1D
curing compound.
Properties
Appearance:
Specific gravity:
Application
temperature:
Curing efficiency:
Coverage rate
Typically within the range of 4.0 - 5.0 m2/litre. Coverage
rates outside this recommended range may be suitable to
meet specific requirements. Contact local Fosroc office or
representative for advance in such cases.
Equipment
Description
Concure WB309 is water based concrete curing compound
based on a low viscosity wax emulsion which incorporates a
special alkali reactive emulsion breaking system.
Page 1
Concure WB309
Limitations
Precautions
Estimating - packaging
Fire
Concure WB309 is water based and non-flammable.
Cleaning and disposal
Spillages of Concure WB309 should be absorbed onto
sand, earth or vermiculate and transferred to suitable
containers. Remnants should be hosed sown with large
quantities of water.
Important note:
Fosroc products are guaranteed against defective materials and manufacture and are sold subject to its standard Conditions for the
Supply of Goods and Services, copies of which may be obtained on request. Whilst Fosroc endeavours to ensure that any advice,
recommendation, specification of information it may give is accurate and correct, it cannot, because it has no direct or continuous
control over where or how its products are applied, accept any liability either directly or indirectly arising from the use of its products,
whether or not in accordance with any advice, specification, recommendation of information given by it.
www.fosroc.com
email: fosam@fosroc.com
Regional Offices
Jeddah Sales Office
Jeddah Showroom
Riyadh
Dammam
Khamis Mushayt
Yanbu
Makkah
Medinah
Jubail
Registered Office: Industrial Area, Phase 4, Road No. 414, Street No. 407
Page 2
FO SA/CONCURE WB309/02/05