Professional Documents
Culture Documents
6.8 calculation
Click the calculation button of tool bar or click calculation (c) > calculation (A) of the menu to display
the calculation window.
As regards calculation, select 2 points and calculate the average value and standard deviation
between them. You can perform calculation of up to 10 steps.
Click the button oor scroll button, set the cursor at the start point of calculation and
the click the start point set button
Similiarly set the cursor at the end point and click the end point set button
The selected 2 points will appear on the waveform. Now click the end button.
By clicking the cancel button, the current selected points will be cancelled
As rerages the time,torque and pressure, the values of cursors present position will be
displayed
By clicking data while holding down the ctrl key, you can select (reverse indication) more
than one data
By clicking two data while holding down the shift key, you can select (reverse indication) all
the data included in between these two data
(7) sort
6.10.1 all
By clicking tabs of environment setup window the following window is displayed