Professional Documents
Culture Documents
Dual Polarization
Half-power Beam Width
Adjust. Electr. Downtilt
790 960
1710 2180
65
65
0 10
0 6
742265V02
Type No.
Frequency range
Polarization
Gain (dBi)
Tilt
790960
824 894 MHz
+45, 45
+45, 45
+45, 45
17102180
1710 1880 MHz 1850 1990 MHz 1920 2180 MHz
+45, 45
+45, 45
+45, 45
15.6 ... 15.5 ... 15.3 15.9 ... 15.8 ... 15.5 16.1 ... 16.0 ... 15.6 18.2 ... 18.5 ... 18.3 18.5 ... 18.7 ... 18.3 18.5 ...18.7 ... 18.3
0.5 ... 5 ... 9.5 0.5 ... 5 ... 9.5 0.5 ... 5 ... 9.5
0 ... 3 ... 6
0 ... 3 ... 6
0 ... 3 ... 6
Horizontal Pattern:
Half-power beam width
68
67
65
65
65
61
> 27 dB
> 28 dB
> 28 dB
> 30 dB
> 30 dB
> 30 dB
Typically:
25 dB
> 10 dB
Typically:
25 dB
> 10 dB
Typically:
25 dB
> 10 dB
Typically:
25 dB
> 10 dB
Typically:
25 dB
> 10 dB
Typically:
25 dB
> 10 dB
0
60
Tracking, Avg.
1.5 dB
0.5 dB
Squint
2.5
2.5
Vertical Pattern:
Half-power beam width
Electrical tilt, contin. adjust.
10.9
10.6
10
5.0
4.8
4.6
0.59.5
0.59.5
0.59.5
0 6
0 6
0 6
50
50
50
50
50
50
VSWR
< 1.5
< 1.5
< 1.5
< 1.5
< 1.5
< 1.5
> 30 dB
> 30 dB
> 30 dB
> 30 dB
> 30 dB
> 30 dB
Isolation: Intrasystem
Isolation: Intersystem
Intermodulation IM3
790 960
45
790 960
+45
1710 2180
45
1710 2180
+45
7-16
7-16
7-16
7-16
65
10
dB
dB
Mechanical specifications
10
10
Input
Connector position
Horizontal Pattern
Adjustment
mechanism
Wind load
65
4.8
10
10
dB
936.3782/d
Vertical Pattern
0.5 9.5 electrical downtilt
Horizontal Pattern
Internet: www.kathrein.de
dB
Subject to alteration.
Vertical Pattern
0 6 electrical downtilt
Bottom
2 x, Position bottom
continuously adjustable
Frontal:
Lateral:
Rearside:
200 km/h
Height/width/depth
Category of
mounting hardware
M (Medium)
Weight
Packing size
Scope of supply
20 kg / 22 kg (clamps incl.)
2256 x 282 x 182 mm
Panel and 2 units of clamps
for 50 115 mm diameter
742265V02 Page 1 of 2
KATHREIN-Werke KG . Anton-Kathrein-Strae 1 3 . P.O. Box 10 04 44 . 83004 Rosenheim . Germany . Phone +49 8031 184-0 . Fax +49 8031 184-973
Accessories
General Information
1.0 kg
1
1
1
1
Mast: 28 60 mm diameter
Mast: 110 220 mm diameter
Mast: 210 380 mm diameter
Downtilt angle: 0 11
0.8
2.7
4.8
2.8
731651
85010002
85010003
737978
clamp
clamp
clamp
downtilt kit
kg
kg
kg
kg
For downtilt mounting use the clamps for an appropriate mast diameter together with the downtilt kit.
Wall mounting: No additional mounting kit needed.
Material:
Grounding:
The metal parts of the antenna including the mounting kit and the inner
conductors are DC grounded.
Environmental conditions: Kathrein cellular antennas are designed to operate under the environmental conditions as described in ETS 300 019-1-4 class 4.1 E.
The antennas exceed this standard with regard to the following items:
Low temperature: 55 C
High temperature (dry): +60 C
2005
1 clamp
738546
1967
Weight
approx.
Description
72
64
1933
Remarks
Type No.
Accessories
Adjustment mechanism
with integrated scale
Ice protection: Due to the very sturdy antenna construction and the
protection of the radiating system by the radome, the antenna remains
operational even under icy conditions.
Environmental tests:
49
46
108
167*
146*
Layout of interface:
60
261*
Please note:
Bottom view
* Dimensions refer to radome
As a result of more stringent legal regulations and judgements regarding product liability, we are
obliged to point out certain risks that may arise when products are used under extraordinary operating
conditions.
The mechanical design is based on the environmental conditions as stipulated in ETS 300 019-1-4 and thereby
respects the static mechanical load imposed on an antenna by wind at maximum velocity. Wind loads are
calculated according to DIN 1055-4. Extraordinary operating conditions, such as heavy icing or exceptional
dynamic stress (e.g. strain caused by oscillating support structures), may result in the breakage of an antenna
or even cause it to fall to the ground. These facts must be considered during the site planning process.
The installation team must be properly qualified and also be familiar with the relevant national safety
regulations.
The details given in our data sheets have to be followed carefully when installing the antennas and
accessories.
The limits for the coupling torque of RF-connectors, recommended by the connector manufacturers
must be obeyed.
Any previous datasheet issues have now become invalid.
Page 2 of 2 742265V02
Internet: www.kathrein.de
KATHREIN-Werke KG . Anton-Kathrein-Strae 1 3 . P.O. Box 10 04 44 . 83004 Rosenheim . Germany . Phone +49 8031 184-0 . Fax +49 8031 184-973
936.3782/d
184
Subject to alteration.
167