Professional Documents
Culture Documents
Highlights
True three-phase bridge topology for
DC/AC output converter
Transformerless topology
Each inverter is set on specific grid
codes which can be selected in the
field
Wide input range
Dual input section with independent
MPPT allows optimal energy
harvesting from two sub-arrays
oriented in different directions
Additional highlights
Electrolyte-free power converter to
further increase the life expectancy
and long term reliability
Integrated DC disconnect switch
in compliance with international
standards (-S and -FS versions)
Natural convection cooling for
maximum reliability
PVI-10.0-TL-OUTD
PVI-12.5-TL-OUTD
900 V
360 V (adj. 250...500 V)
0.7 x Vstart...850 V
580 V
10300 W
12800 W
2
6500 W
8000 W
300...750 V
360...750 V
36.0 A / 18.0 A
22.0 A
2 (-S version) 3 (Standard or -FS version)
Tool Free PV connector WM / MC4
Inverter protection only, from limited current source, for standard and -S versions,
and for -FS version when max 2 strings are connected
2
According to local standard
25 A / 1000 V
12 A / 1000 V
Three phase 3W or 4W+PE
10000 W
11000 W (3)
11500 VA
12500 W
13800 W (4)
13800 VA
400 V
320...480 V
(1)
16.6 A
19.0 A
20.0 A
22.0 A
50 Hz / 60 Hz
47...53 Hz / 5763 Hz(2)
> 0.995, adj. 0.9 with Pacr =10.0 kW,
> 0.995, adj. 0.9 with Pacr =12.5 kW,
0.8 with max 11.5 kVA
0.8 with max 13.8 kVA
< 2%
Screw terminal block, cable gland M40
According to local standard
19.0 A
22.0 A
3 plus gas arrester
97.8%
97.1% / -
97.2% / 30.0 W
< 10.0 W
IN1.1(+)
+
IN1.2(+)
IN1
IN1
IN1.1(-)
IN1.2(-)
IN1.1(-)
MPPT 1
(DC/DC)
Bulk caps
Inverter
(DC/AC)
IN1
Line
filter
Grid parallel
relay
L1
IN1.2(-)
L2
IN1.3(-)
L3
N
IN2.1(+)
IN2.2(+)
IN2.3(+)
IN2.1(+)
+
IN2
IN2
IN2.1(-)
IN2.2(-)
IN2.2(+)
IN2.1(-)
MPPT 2
(DC/DC)
PE
IN2
-
IN2.2(-)
IN2.3(-)
Standard version
-S version
IN1.1(+)
IN1.2(+)
IN1.3(+)
IN1
IN1.1(-)
RS485
IN1.2(-)
+ T/R
- T/R
IN1.3(-)
RTN
IN2.1(+)
DC/AC
DSP
contr.
DC/DC
DSP
contr.
IN2.2(+)
Remote control
+R
IN2.3(+)
-R
IN2
Alarm
N.C
IN2.1(-)
N.O
IN2.2(-)
Control circuit
IN2.3(-)
-FS version
PVI-10.0-TL-OUTD
PVI-12.5-TL-OUTD
PVI-USB-RS232_485 (opt.)
VSN300 Wifi Logger Card(5) (opt.), PVI-AEC-EVO (opt.), VSN700 Data Logger (opt.)
VSN300 Wifi Logger Card (5) (opt.)
16 characters x 2 lines LCD display
-25...+60C (-13...+140F)
-25...+60C (-13...140F)
with derating above 55C (131F)
with derating above 50C (122F)
0...100% condensing
< 50 dB(A) @ 1 m
2000 m / 6560 ft
IP 65
Natural
716mm x 645mm x 224mm / 28.2 x 25.4 x 8.8
< 41.0 kg / 90.4 lb
Wall bracket
Transformerless
CE (50 Hz only)
EN62109-1, EN62109-2, AS/NZS3100, AS/NZS 60950, EN61000-6-2,
EN61000-6-3, EN61000-3-11, EN61000-3-12
CEI 0-21, CEI 0-16, VDE 0126-1-1, VDE-AR-N CEI 0-21, CEI 0-16, VDE 0126-1-1, VDE-AR-N
4105, G59/3, C10/11, EN 50438 (not for all
4105, G59/3, C10/11, EN 50438 (not for all
national appendices), RD1699, RD 1565, AS national appendices), RD1699, RD 1565, AS
4777, BDEW, ABNT NBR 16149, CLC/FprTS 4777, BDEW, ABNT NBR 16149, CLC/FprTS
50549, PEA, MEA
50549
PVI-10.0-TL-OUTD
PVI-10.0-TL-OUTD-S
PVI-10.0-TL-OUTD-FS
PVI-12.5-TL-OUTD
PVI-12.5-TL-OUTD-S
PVI-12.5-TL-OUTD-FS
1. The AC voltage range may vary depending on specific country grid standard
4. Limited to 12500 W for Germany
2. The Frequency range may vary depending on specific country grid standard
5. Check availability before to order
3. Limited to 10000 W for Belgium and Germany
Remark. Features not specifically listed in the present data sheet are not included in the product
99
98
98
97
97
96
Efficiency [%]
95
94
94
93
93
300 Vdc
92
580 Vdc
91
90
95
750 Vdc
580 Vdc
91
90
0%
6%
13%
19%
25%
31%
38%
44%
50%
56%
63%
69%
75%
81%
88%
94% 100%
360 Vdc
92
750 Vdc
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
BCD.00378 EN 14.04.2014
Efficiency [%]
96