You are on page 1of 4

Embedded systems 7842522786/9948887244/9346934699

RFID and ZigBee Based Manufacturing Monitoring System

AIM:
The main aim of this project is to monitoring the product in various manufacturing
systems
PURPOSE:
The purpose of this project is to obtain the real-time status and data of the various
manufacturing systems located in different nodes.
BLOCK DIAGRAM;
TRANSMITER1:-

Power supply
Micro
controller

Zigbee

Micro
controller

Zigbee

RFID reader

TRANSMITER2:-

Power supply

RFID
reader
Email: info@purpletechnosolutions.com

www.purpletechnosolutions.com

9030880909/101/202/505/606

Embedded systems 7842522786/9948887244/9346934699

RECEVER:-

Power supply

Zigbee

Micro
controller

PC

POWER SUPPLY:

Step Down
Transformer

Bridge
Rectifier

Filter
Circuit

Regulator
section

DESCRIPTION:

Now a days energy product has some life time and that life time is going to decrease day
by day for every product to check that life time we are going to spend a lot of money by

Email: info@purpletechnosolutions.com

www.purpletechnosolutions.com

9030880909/101/202/505/606

Embedded systems 7842522786/9948887244/9346934699

checking the product life time. So by using the RFID and Zigbee Based Manufacturing system
we can check the status of no of products manufactured in different nodes.
RFID monitoring devices can serve as the data collection system and the ZigBee wireless
network can serve as the communication system to transmit the data to different levels of the
enterprise management from the perspective of system automatic control.
The monitoring layer is the core of the RFID and ZigBee based manufacturing
monitoring system. With the help of the readers placed in different locations, the information in
the tags nearby will be collected, if gaining the permission, the readers can read the data on the
tags and transfer the data to the end-user devices.

TECHNOLOGY:

RFID:

RFID is an acronym for Radio Frequency Identification. In general terms, RFID is a


means of identifying a person or object using a radio frequency transmission. In other words
RFID is an electronic method of exchanging data over radio frequency waves. The technology
can be used to identify, track, sort or detect a wide variety of objects.
There are three major components of an RFID system: the reader, the antenna, and the tags. Each
tag is associated with a unique number. When a tag is in the detection range of the reader, the
number is read. Two types of tags can be found: active tags with a longer detection range and
passive tags with a shorter detection range. An RFID tag is usually attached to an object and the
information of the object along with the RFID number are recorded in the database. Whenever
the RFID tag is sensed, the object can thus be identified.

ZIGBEE:
Zigbee is new wireless technology guided by IEEE 802.15.4 Personal Area Network standard.
It is primarily designed for the wide range controlling applications and to replace the existing non-

Email: info@purpletechnosolutions.com

www.purpletechnosolutions.com

9030880909/101/202/505/606

Embedded systems 7842522786/9948887244/9346934699

standard technologies. It currently operates in 868 MHz band at a data rate of 20Kbps in Europe, 914MHz
band at 40kbps in USA, and the 2.4GHz ISM bands Worldwide at a maximum data-rate of 250kbps. It is
used to verify whether users truncation is possible or not. One of the main advantage of this ZIGBEE
communication is that it provides a noise free communication, the amount of noise added in this type of
communication is very less compared to the other wireless communications.

SOFTWARES:
1. Embedded C
2. Keil IDE
3. Uc-Flash or ISP
4. Express PCB

HARDWARE COMPONENTS:
1. Microcontroller
2. Power supply
3. RFID reader
4. RFID tags
5. Zigbee module
6. PC

RESULT:

By this project we can provide no of products manufactured in different nodes.

Email: info@purpletechnosolutions.com

www.purpletechnosolutions.com

9030880909/101/202/505/606

You might also like