Professional Documents
Culture Documents
Part A
1. Mention the different types of orifice plate.
2. What is the quantity meter?
3. Write down the types of variable area flow meter.
4. What are the factors to be considered while selecting a flow meter?
5. What are the advantages of using venturi meter as a restriction element?
6. What is dall tube?
7. List the different closed channel flow meter.
8. What are the advantages of orifice over venturimeter?
9. Write down any two applications of pitot tube.
10. What is Vena contracta point?
11. Mention any 2 advantages of Rotameter over Orifice meter
12. What is turbulent flow?
13. What is meant by Reynolds number?
14. How Reynolds number related to laminar and turbulent flow?
15. Define Discharge Coefficient?
16. Define the term Velocity approach factor in fluid flow measurement?
17. Give the advantages of Rotameter?
18. What is the disadvantage of Turbine mass flow meter?
19. What is laminar flow?
20. List the different unit of flow.
Part B
1. Describe with neat sketch the construction and working of variable head type flow meter.
Also, derive an expression for incompressible fluids.
2. Discuss the machining methods and tapping in orifice flow meter.
3. Describe with neat sketch the construction and working of pitot tube. Also, discuss its
advantages and disadvantages.
4. Describe with neat sketch the construction and working of rotameter. Also, discuss its
advantages and disadvantages.
5. a, What are the factors to be considered in piping arrangement for flow meter. (8 Mark)
b, Explain the principles and operation of elbow meter. (8 Mark)
6. With a neat diagram, explain the construction of different types of venture tube and
discuss about its installation.
7. Explain the installation and piping arrangement for different type of fluid.
8. Describe the construction, working principle of dall tube and also mention its advantages
and disadvantages.
9. Distinguish between variable head and variable area flow meter. List the application
notes for flow meter.
10. Describe with neat sketch any two closed channel flow meter. Also, derive an expression
for compressible fluids
Unit II
Part A
1. What is meant by Positive displacement meter?
2. What is meant by calibration of flow meter?
3. What is the principle behind the inferential flow meter?
4. Which device used for water service measurement?
5. Stat the principle of Nutating Disc
6. What is differential pressure transmitter?
7. Mention some positive displacement meter.
8. What is the different types thermal flow meter?
9. What is meant by Area flow meter?
10. How area flow meter is differ from differential flow meter?
11. Write down the classification of flow meters.
12. What is inferential flow meter?
13. What is the principle of turbine flow meter?
14. Does the operation of the turbine flow meter depend on liquid characteristics?
15. Write short notes on pitot rotameters.
16. Write short notes on purge rotameters
17. What is variable area orifice meter?
18. Name the methods used in calibration of liquid flow meters
19. Name the methods used in calibration of gas flow meters
20. List the application of flow meter.
Part B
1. .Write notes on the following types of positive displacement meters.
a.
Nutating disc type.
b.
Oval gear type.
2. Write notes on the following types of positive displacement meters.
a.
Reciprocating piston.
b.
Oval gear and helix type.
3. What is the principle used in turbine flow meter? Explain a typical mass flow meter used
in practice with necessary sketches and equation. Discuss the limitation of the same
Part B
1. Explain in detail about displacer type and ultrasonic level measurement
2. Discuss the electrical types of level measurement and magnetic level gauge with neat
sketch
3. Discuss the principle of operation of bubbler type and diaphragm box type level
measurement
4. Explain in detail about hydrostatic type level measurement method and two float type
viscometer Explain the capacitance type level measurement
5. Explain the boiler drum level measurement
6. a. Explain the use of displacer in the measurement of level
b. Explain the ultrasonic method of level measurement along with the merits and
demerits.
7. With a neat sketch, explain how level measured using nuclear radiation is.
8. List the non-contact type of level measurement system. Explain with neat sketch the
working construction of any two of them..
9. a. Describe the working of displacer type of level measurement.
b. Discuss about the level sensors selection and applications.
10. Describe the construction and working principle of resistance type and capacitance type
level gauge.
Unit V
Part A
1. Define moisture.
2. What are the advantages of psychrometer?
3. What is dry and wet bulb psychrometer?
4. What is Dew cell?
5. Differentiate Newtonian and non-Newtonian fluids.
6. Which device is suitable for measuring the level of corrosive and abrasive liquids?
7. Define relative humidity of the substance.
8. What is meant by dew-point temperature?
9. What is meant by hydro step system?
10. Define relative viscosity.
11. What are different types of viscometer?
12. What is a psychrometer?
13. What do you mean by the term consistency?
14. Differentiate kinematic viscosity from specific viscosity.
15. What do you mean by the term consistency in viscosity meter?
16. Define dew point temperature.
17. Why viscosity measurement important for industrial process?
18. Define poise.
19. Define dynamic viscosity.
20. Define fluidity and relative humidity.
Part B
1. Explain the principle of humidity measurement. Explain the working principle of any one
type of hygrometer with neat sketch
2. Discuss the principle of operation of different methods of moisture measurement
3. .Explain the working principle of any two type of hygrometer for humidity measurement
with neat sketch
*****************************************************************************