Professional Documents
Culture Documents
constructive solutions
Preparation
Advantages
! Single component
! Easily and inexpensively applied; high coverage rate
! Tough and resistant to most naturally occurring chemicals
! Does not taint water
! Can be applied to damp concrete substrates
! Quick drying
Surfaces must be clean, dry, free from oil, grease and all
loosely adhering particles such as rust, mill scale, mortar
and cement laitence. These should be carefully removed by
wire or stiff brushing and finally soft brushing or filtered
compressed air to remove dust.
Properties
Test method
Typical
Nitoproof 100*
result
Drying time
Flexibility
Chloride protection
Effect on water
:
:
:
:
Overcoating time
BS3900:C2:1972
BS3416:1975
BS3416:1975
BS3416:1975
Appendix B
3 hours (min)
21/2 hours
Pass
Pass
Pass
Curing compound
Apply two coats of Nitoproof 100 as for damp proof
membranes. This will give a curing efficiency in excess of
80% and comply with ASTM C309. Nitoproof 100 can be
applied to damp concrete.
Nitoproof 100*
Repairs
Storage
Shelf life
Cleaning
Storage conditions
Coverage
Nitoproof 100
Technical support
Nitoproof 100
Fosroc Solvent 102
Fosroc Chemical Degreaser
:
:
37C
33C
Important note
Fosroc products are guaranteed against defective materials and manufacture and are sold subject to its standard
Conditions for the Supply of Goods and Service. All Fosroc datasheets are updated on a regular basis. It is the users
responsibility to obtain the recent version. Refer to www.fosroc.com.
Al Gurg Fosroc
LLC
Post Box 657, Dubai
United Arab Emirates
www.fosroc.com
Head Office
telephone: (+9714) 2039699
Regional
email: agf@fosroc.com
offices
email:
email:
abudhabi@fosroc.com
bahrain@fosroc.com
Kuwait, Boodai
Oman, Al Amana
Qatar, Tadmur
telephone: 4817618
telephone: 24815080
telephone: 4500607
fax: 4832124
fax: 24817554
fax: 4500543
email: kuwait@fosroc.com
email: oman@fosroc.com
email: qatar@fosroc.com
UAE/0312/06/D