Professional Documents
Culture Documents
A. The
storage
box that
houses
the bed is
about 38
high and
81 wide
and
extends
only 16
from the
wall.
A.
B.
SIDE NOTE : Suggested mattresses are SULTAN FLORVAG foam mattresses (2 of them make up a standard Queen size
bed) from IKEA. One can omit the mattresses and use a queen size air mattress instead.
Key
Size
5/8 x 36-3/4 x 78
1 - Front
5/8 x 28-1/2 x 62
1 - Shelf
5/8 x 11-1/2 x 81
5/8 x 7-1/2 x 65
5/8 x 8-3/4 x 78
8 - Base sides
3/4 x 10-1/2 x 19
1 - Pull
5/8 x 7-1/2 x 40
6 - Mattress supports
1/2 x 12-3/8 x 60
2 - Spacers, Pine
3/4 x 3/4 x 4
12 - Lattice, Pine
1/4 x 1 x 96
Step-By-Step Instructions
10 3/4
79 1
/2
36
8
28 3/4
2
36 1/
78
/4
3/
60
1/
3/
1.
Assemble the large box with glue and screws.
The box bottom fits between the sides, and top
hangs over the sides and front for a more
finished look. Access to the mattresses will be
through the top panel which is attached either
by a piano hinge or tension.
2.
Install the shelf F flush with the back of the
storage box and hanging over the top G in front
and on the sides. Bore holes in the top G to
accept the dowels in the sides D.
3.
Line up the folding base pieces L and attach
the piano hinges as shown in the drawing. The
holes in the mattress supports N provide
ventilation and a finger grip when folding the
bed. Attach the assembled folding base to the
bed box back C roughly 6 in from the edge.
4.
A view from above shows the spacers O
between the pull M and the bed front
B. Fully open the bed and attach the
mattress supports N.
5.
Attach heavy-duty magnetic catches to the
bed box sides E. The catches hold the bed
in place when its closed. (NOTE: You may
also want to use a spring loaded screen
hook to keep the box shut securely.)
NOTE : A special thank you to Malissa Tack of Tiny Tack House for her excellent renderings making these plans
possible.
To view a short video on how the bed rolls out and rolls back in please visit our YouTube channel and video HERE.