You are on page 1of 17

QUALITY RECORD

STANDARDS AND TESTING DIVISION


ITDI

Q.R.5.3.3.3
Page 1 of 17

PHYSICAL AND PERFORMANCE TESTING


LABORATORY

APPOINTEE'S BIODATA

Revision 4
9 Sept. 2010

NAME

: MARY ANN P. PEREDO

ADDRESS

: Blk 51 Lot 24 Kapayapaan Ville (Palao)


Canlubang, Calamba City, Laguna

PLACE OF BIRTH

: Bantay, Ilocos Sur

DATE OF BIRTH

: May 23, 1954

CIVIL STATUS

: Married

CITIZENSHIP

: Filipino

EDUCATIONAL BACKGROUND
Collegiate

: Bachelor of Science in Chemical Engineering


Mapua Institute of Technology
(1971 1976)

Secondary

: Ilocos Sur National High School


(1967 - 1971)

Primary

: Bantay Central School


(1961 1967)

ELIGIBILITY
: Chemical Engineering Board Exam (Passed)
Manila, October, 1977
WORK EXPERIENCE
Position: Senior Science Research Specialist
September 8, 2010 to present
Physical & Performance Testing Laboratory (PPTL)
Standards & Testing Division (STD)
Industrial Technology Development Institute (ITDI)
Department of Science and Technology (DOST)
General Santos Avenue, Bicutan, Taguig, City
Duties and Responsibilities:

Prepared by:
Approved by:
Issued by STD. No part of this Manual may be reproduced, amended, or transmitted
in any form or by any means without prior written approval of the Chief of STD.

QUALITY RECORD
STANDARDS AND TESTING DIVISION
ITDI

Q.R.5.3.3.3
Page 2 of 17

PHYSICAL AND PERFORMANCE TESTING


LABORATORY

APPOINTEE'S BIODATA

Revision 4
9 Sept. 2010

Perform physical tests on plastics and polymer products, rubber and other related products by using
mechanical and other analytical equipment. Plastic tests are the following:

Tensile Strength

Elongation

Water Absorption Test

Melt Flow Rate

Chemical Resistance Test

Density/Specific Gravity

Vicat Softening Point

Compressive Strength

Heat Deflection TemperatureHardness

Izod Impact Test

Longitudinal Heat Reversion

Issue certificate of formula of conversion to clients for liquidation and tax credit purposes.

Attend Bureau of Products Standards technical committee meetings on School and Office Supplies.

Analyzed samples for proficiency testing of plastics and rubber.

Validate requests on formula of conversion and testing analysis occasionally.

Attend to customer's inquiry through the telephone as per needed.

Prepare documents in conformance to the laboratory accreditation requirements.

Participate in STD internal audit as internal auditor.

Perform other duties assigned by the head of the laboratory.

Assist the Supervising Science Research Specialist in undertaking the R and D activities of the
Section/Laboratory.

Conduct research studies on new research projects.

Study, correlate and determine work procedures, methods and techniques to be used for research work.

Supervise and give work assignment to lower technical staff, discussion for scientific advancement.

Position: Science Research Specialist II

Prepared by:
Approved by:
Issued by STD. No part of this Manual may be reproduced, amended, or transmitted
in any form or by any means without prior written approval of the Chief of STD.

QUALITY RECORD
STANDARDS AND TESTING DIVISION
ITDI

Q.R.5.3.3.3
Page 3 of 17

PHYSICAL AND PERFORMANCE TESTING


LABORATORY

APPOINTEE'S BIODATA

Revision 4
9 Sept. 2010

November 20, 1998 to September 7, 2010


Materials and Products Performance Laboratory (MPPL)
Standards and Testing Division (STD)
Industrial Technology Development Institute (ITDI)
Department of Science and Technology (DOST)
General Santos Avenue, Bicutan, Taguig, City
Duties and Responsibilities:

Perform physical tests on plastics and polymer products, rubber and other related products by using
mechanical and other analytical equipment Plastic tests are the following:

Tensile Strength

Elongation

Water Absorption Test

Melt Flow Rate

Chemical Resistance Test

Density

Vicat Softening Point

Specific Gravity

Heat Deflection TemperatureHardness

Izod Impact Test

Longitudinal Heat Reversion

Prepare and submit computerized reports of test analysis.

Issue certificate of formula of conversion to clients for tax drawback purposes.

Attend seminars and plant visits.

Validate requests on formula of conversion and testing analysis occasionally.

Attend to customers inquiry through the telephone as per needed.

Perform other duties assigned by the head of the laboratory.

Position: Science Research Specialist II

Prepared by:
Approved by:
Issued by STD. No part of this Manual may be reproduced, amended, or transmitted
in any form or by any means without prior written approval of the Chief of STD.

QUALITY RECORD
STANDARDS AND TESTING DIVISION
ITDI

Q.R.5.3.3.3
Page 4 of 17

PHYSICAL AND PERFORMANCE TESTING


LABORATORY

APPOINTEE'S BIODATA

Revision 4
9 Sept. 2010

May 16, 1995 March 19, 1996


Plastics and Polymers Laboratory (PPL)
Standards and Testing Division (STD)
Industrial Technology Development Institute (ITDI)
Department of Science and Technology (DOST)
General Santos Avenue, Bicutan, Taguig, Metro Manila

Duties and Responsibilities:

Perform physical tests on plastics and polymer products, rubber and other related
mechanical and other analytical equipment Plastic tests are the following:

Tensile Strength

Elongation

Chemical Resistance Test

Density

Vicat Softening Point

Specific Gravity

Heat Deflection TemperatureHardness

Prepare and submit computerized reports of test analysis.

Issue certificate of formula of conversion to clients for tax drawback purposes.

Attend seminars and plant visits.

Validate requests on formula of conversion and testing analysis occasionally.

Attend to customers inquiry through the telephone as per needed.

Perform other duties assigned by the head of the laboratory.

Position: Science Research Specialist II


March 20, 1995 November 20, 1998
Paper and Textile Laboratory (PTX)

Prepared by:
Approved by:
Issued by STD. No part of this Manual may be reproduced, amended, or transmitted
in any form or by any means without prior written approval of the Chief of STD.

products by using

Q.R.5.3.3.3

QUALITY RECORD
STANDARDS AND TESTING DIVISION
ITDI

Page 5 of 17

PHYSICAL AND PERFORMANCE TESTING


LABORATORY
Revision 4

APPOINTEE'S BIODATA

9 Sept. 2010
Standards and Testing Division (STD)
Industrial Technology Development Institute (ITDI)
Department of Science and Technology (DOST)
General Santos Avenue, Bicutan, Taguig, Metro Manila
Duties and Responsibilities:

Perform physical and chemical analysis for the following:

Paper and Board:

* Textile:

Grammage

Thickness

Air Resistance

Opacity/Brightness

Bursting strength

Tensile strength

Color of fiber

Smoothness test

Stiffness test

Adhesion strength

Absorbency test Yarn count/Tex/Fiber length


Ash content

Fabric mass/weight

Becker value

Moisture content

Bursting strength

Tearing strength

Elongation

GPSS for Phil. Flag

Fabric count and

Colorfastness to fresh

composition

& sea water

Other related products:

Manila Rope Yarn Becker value


* Carbonless paper

pH
Image development test (% reflectance)

Prepared by:
Approved by:
Issued by STD. No part of this Manual may be reproduced, amended, or transmitted
in any form or by any means without prior written approval of the Chief of STD.

QUALITY RECORD
STANDARDS AND TESTING DIVISION
ITDI

Q.R.5.3.3.3
Page 6 of 17

PHYSICAL AND PERFORMANCE TESTING


LABORATORY

APPOINTEE'S BIODATA

Revision 4
9 Sept. 2010

Light Fastness test


Image sharpness &legibility (Occular subjective test)

Diaper

Absorbency test

Position: Science Research Specialist II


October 19, 1992 March 19, 1995
Metals and Alloys Laboratory (MAL)
Standards and Testing Division (STD)
Industrial Technology Development Institute (ITDI)
Department of Science and Technology (DOST)
General Santos Avenue, Bicutan, Taguig, Metro Manila
Duties and Responsibilities:

Assisted the head of the laboratory in the planning and scheduling of work assignments in the laboratory.

Conducted and tested samples of metals, alloys and other samples assigned to the laboratory. Prepared
and signed reports of analysis for approval of the laboratory head.

Assisted in the instrumental analysis of samples submitted for testing.

Prepared and typed RIV for laboratory supplies and glassware needed in the laboratory.

Performed other duties as assigned by the head of the laboratory.

Position: Science Research Specialist I


January 2, 1989 October 15, 1992
Minerals, Ores and Fertilizers Laboratory (MOF)
Standards and Testing Division (STD)
Industrial Technology Development Institute (ITDI)
Department of Science and Technology (DOST)
General Santos Avenue, Bicutan, Taguig, Metro Manila

Prepared by:
Approved by:
Issued by STD. No part of this Manual may be reproduced, amended, or transmitted
in any form or by any means without prior written approval of the Chief of STD.

QUALITY RECORD
STANDARDS AND TESTING DIVISION
ITDI

Q.R.5.3.3.3
Page 7 of 17

PHYSICAL AND PERFORMANCE TESTING


LABORATORY

APPOINTEE'S BIODATA

Revision 4
9 Sept. 2010

Duties and Responsibilities:

Conducted analysis of minerals, ores and fertilizer, fine chemicals, water (domestic and industrial),
metals and other inorganic materials.
Prepared/standardized reagents and solutions needed for the analysis.

Prepared and submitted reports of analysis.

Attended technical inquiries of client occasionally.

Performed other duties as assigned by the laboratory head.

Position: Chemist
March, 1979 December, 1988
Maintenance Depot (MD)
Armed Forces of the Philippine Logistics Command (AFPLC)
Camp General Emilio Aguinaldo, Quezon City
Duties and Responsibilities:

Performed physical tests on textile and paper to conform the standard specification of AFP requirements.

Conducted actual physical tests on degreaser and other paint remover for military use.

Performed research on the manufacture of dry cell battery for military vehicle.

Prepared reports on observation and make recommendation of such test.

Monitored the routinary output of military supplies and vehicles using computer system.

SKILL:
Basic computer encoder
Operates the following laboratory equipment:
Bausch & Lomb Spectronic 20

Air Resistance (Gurley)

UV-VIS Spectrophotometer

Photovolt Reflectance Meter

Prepared by:
Approved by:
Issued by STD. No part of this Manual may be reproduced, amended, or transmitted
in any form or by any means without prior written approval of the Chief of STD.

QUALITY RECORD
STANDARDS AND TESTING DIVISION
ITDI

Q.R.5.3.3.3
Page 8 of 17

PHYSICAL AND PERFORMANCE TESTING


LABORATORY
Revision 4

APPOINTEE'S BIODATA

9 Sept. 2010
Flame Photometer

Mullen Burst Tester

Buchi Distillation Apparatus

Tensile Strength Tester

Atomic Absorption Spectrophotometer Tearing Strength Tester(Elmendorf)


Mercury Analyzer

Stiffness Tester

Electrolytic Analyzer

Shore Durometer Hardness Tester

Melting Point Apparatus

Melt Flow Rate Tester

Brookfield Viscometer

Abrasion Tester

PROJECT ASSISTED:
CRMs Intercomparison Programme - sponsored by National Research Center
(NRCCRM) of China
- conducted analysis of mercury in milk, nitrogen in liver
Fertilization of KNO3 on Saline Water Irrigation sponsored by US/Israel Cooperative
Development Research

conducted analysis of nitrogen of different samples of soils, plant shoots, shells, and roots.

Vacuum Dried Tahong sponsored by Millenia Products, Inc. ITDI, TBI, FPD
conducted analysis of mercury, lead, cadmium and arsenic in tahong

Liquid Waste - sponsored by Environmental Division, ITDI


conducted analysis of mercury on liquid waste.

Microfungal Mycelium Mushroom MGD, ITDI


conducted analysis of lead, cadmium, and mercury on mushroom.
Manufacture of Dry Cell Battery research project of AFPLC for military vehicle.

Prepared by:
Approved by:
Issued by STD. No part of this Manual may be reproduced, amended, or transmitted
in any form or by any means without prior written approval of the Chief of STD.

QUALITY RECORD
STANDARDS AND TESTING DIVISION
ITDI

Q.R.5.3.3.3
Page 9 of 17

PHYSICAL AND PERFORMANCE TESTING


LABORATORY

APPOINTEE'S BIODATA

Revision 4
9 Sept. 2010

SPECIAL ASSIGNMENT:
Assisted Mrs. Estrella G. Mamaril in the monitoring of the Common Chemicals for ITDI staff.
(1990 1992)
Board of Director of Association of Employees in Scientific Endeavor (AESE)
(2001 2003)
Member of BPS TC-37 on School and Office Supplies (1998 to present)

AWARD:
Model Employee of the Standards and Testing Division (December 2001)

SEMINARS/TRAINING/WORKSHOPS:
(see record of training separate filename)

Prepared by:
Approved by:
Issued by STD. No part of this Manual may be reproduced, amended, or transmitted
in any form or by any means without prior written approval of the Chief of STD.

Q.R.5.3.3.3

QUALITY RECORD
STANDARDS AND TESTING DIVISION
ITDI

Page 10 of 17

PHYSICAL AND PERFORMANCE TESTING


LABORATORY
Revision 4

APPOINTEE'S BIODATA

9 Sept. 2010
VII. TRAINING PROGRAMS (Start from the most recent training.)
INCLUSIVE DATES OF
TITLE OF SEMINAR/CONFERENCE/
ATTENDANCE
NUMBER
WORKSHOP/SHORT COURSES
(mm/dd/yyyy)
OF HOURS
(Write in full)
From
To

CONDUCTED/ SPONSORED BY
(Write in full)

Laboratory Training on Fuels &


Petroleum
On The Job Training: Physical Test
on Textile
Merit Promotion Plan by CSC
Training on Estimation of the
Standard Formula of Manufacture
for the Phil. DDS System
Toxic Use Reduction & Waste
Minimization
Advanced Inductively Coupled
Plasma Instrumentation
Pre-Treatment of Industrial
Wastewater & Hazardous Material
Management
16th Annual Scientific Meeting

01/02/78

05/31/78

840

03/01/79

05/31/79

496

08/25/89
05/09/90

08/25/89
05/10/90

8
16

08/11/92

08/11/92

10/28/93

10/28/93

02/09/94

02/09/94

07/13/94

07/14/94

16

NAST

56th PICHE Annual National


Convention
Carlo Erba 1106 Elemental
Analyzer/DP 200 Integrator
Training
Determination of Grammage
Bursting Strength of Paper and
Paperboard
Air Resistance Test of Paper
Tearing Strength of Paper
Brightness & Opacity Test for
Paper
Thickness Test of Paper
Stiffness Test of Paper

02/16/95

02/18/95

24

PICHE, Baguio City

02/19/95

02/22/95

48

Domestic Trading Corp. Fison


Instruments S.P.A.

03/20/95
03/28/95

03/24/95
03/31/95

40
32

ITDI
ITDI

04/05/95
04/09/95
05/05/95

04/07/95
04/14/95
05/06/95

21
48
16

ITDI
ITDI
ITDI

06/02/95
06/05/95

06/02/95
06/08/95

8
32

ITDI
ITDI

National Institute of Science and


Technology (NIST)
Armed Forces of the Phil.
Logistics Command
ITDI
Industrial Technology
Development Institute (ITDI)
Industrial Technology
Development Institute (ITDI)
Dakila Trdg. Corp Perkin Elmer
Instruments Asia PTE. LTD.
Industrial Technology
Development Institute(ITDI)

Prepared by:
Approved by:
Issued by STD. No part of this Manual may be reproduced, amended, or transmitted
in any form or by any means without prior written approval of the Chief of STD.

Q.R.5.3.3.3

QUALITY RECORD
STANDARDS AND TESTING DIVISION
ITDI

Page 11 of 17

PHYSICAL AND PERFORMANCE TESTING


LABORATORY
Revision 4

APPOINTEE'S BIODATA

9 Sept. 2010
VII. TRAINING PROGRAMS (Start from the most recent training.)
INCLUSIVE DATES OF
TITLE OF
ATTENDANCE
NUMBER CONDUCTED/ SPONSORED BY
SEMINAR/CONFERENCE/WORKSHOP/
(mm/dd/yyyy)
OF HOURS
(Write in full)
SHORT COURSES (Write in full)
From
To

Color of Fiber of Paper


Tensile Strength of Paper
Smoothness Test
Chemistry in Metal Crafts
Complete Test of Nylon Flag:
Determination of Fabric Weight,
Breaking Strength, Yarn Number,
Type of Weave, Fabric Count, &
Color Fastness

06/15/95
06/16/95
06/25/95
03/07/96
05/18/96

06/15/95
06/20/95
06/27/95
03/07/96
05/24/96

8
21
21
8
56

ITDI
ITDI
ITDI
Adamson University
Industrial Technology
Development Institute (ITDI)

Symposium on: Utilization of


Pinatubo Volcanic Ejecta & Related
R & D Studies

02/25/97

02/25/97

ITDI-PCIERD

Determination of Becker Value

03/15/97

03/15/97

Industrial Technology
Development Institute (ITDI)

Moral Recovery Program Integrity


Circles

06/12/97

06/14/97

24

Industrial Technology
Development Institute (ITDI)

Complete Tests of PP Sack:


Determination Breaking Strength,
Bursting Strength & Fabric Count

08/24/97

08/29/97

48

Industrial Technology
Development Institute (ITDI)

IZOD Impact Strength Test for Plastic

11/07/97

11/07/97

Industrial Technology
Development Institute( ITDI)

Water Absorption Test of Plastic


Product

01/11/98

01/13/98

21

Industrial Technology
Development Institute (ITDI)

Tensile Strength Test for Plastic

02/08/98

02/09/98

16

Industrial Technology
Development Institute (ITDI)

Heat Deflection Temperature Test for


Plastic

03/01/98

03/05/98

40

Industrial Technology
Development Institute( ITDI)

Aging Test for Rubber

04/05/98

04/10/98

32

Industrial Technology
Development Institute (ITDI)

Prepared by:
Approved by:
Issued by STD. No part of this Manual may be reproduced, amended, or transmitted
in any form or by any means without prior written approval of the Chief of STD.

Q.R.5.3.3.3

QUALITY RECORD
STANDARDS AND TESTING DIVISION
ITDI

Page 12 of 17

PHYSICAL AND PERFORMANCE TESTING


LABORATORY
Revision 4

APPOINTEE'S BIODATA

9 Sept. 2010
VII. TRAINING PROGRAMS (Start from the most recent training.)
INCLUSIVE DATES OF
TITLE OF SEMINAR/CONFERENCE/
ATTENDANCE
NUMBER CONDUCTED/ SPONSORED BY
WORKSHOP/SHORT COURSES
(mm/dd/yyyy)
OF HOURS
(Write in full)
(Write in full)
From
To
Vicat Softening Point for Plastic
06/07/98
06/09/98
21
Industrial Technology Development
Institute (ITDI)
Industrial Technology Development
Flexural Test
07/07/98
07/07/98
4
Institute (ITDI)
Compression Test
07/30/98
07/30/98
4
Industrial Technology Development
Institute (ITDI)
Determination for Density & Specific
Industrial Technology Development
08/05/98
08/06/98
16
Gravity of Rubber
Institute (ITDI)
11/20/98
11/20/98
8
Shore Durometer Hardness Test for
Industrial Technology Development
Rubber
Institute (ITDI)
Industrial Technology Development
Compression Test for Rubber
12/02/98
12/02/98
8
Institute (ITDI)
Technical Training Course on
12/09/98
12/09/98
8
Shimadzu Philippines Corporation
Autograph w/ Extensometer
03/14/99
03/16/99
21
Determination of Melt Flow Rate for
Industrial Technology Development
Plastic
Institute( ITDI)
Environmental Management Systems
06/18/99
06/18/99
8
Manila Midtown Hotel
(ISO 14001)

PICHE-DOST 1st Technical


Session

11/11/99

11/11/99

Department of Science and


Technology(DOST)

Determination of Bulk Density and


Sieve Analysis of Powder Plastic Resin
Determination of Specific Gravity
(Pycnometer Method)
Resistance Test to Sulfuric Acid for
PVC Pipes & Rigid Plastics
Resistance to Acetone

04/05/99

04/07/99

16

09/08/99

09/08/99

01/16/00

01/28/00

21

02/09/00

02/10/00

16

Longitudinal Heat Reversion Test

03/01/00

03/02/00

16

Water Absorption Test at Boiling


Temperature
Flattening Test

03/20/00

03/21/00

16

04/05/00

04/05/00

Exposure to Heat Test

09/20/00

09/21/00

16

Industrial Technology Development


Institute( ITDI)
Industrial Technology Development
Institute (ITDI)
Industrial Technology Development
Institute (ITDI)
Industrial Technology Development
Institute (ITDI)
Industrial Technology Development
Institute( ITDI)
Industrial Technology Development
Institute( ITDI)
Industrial Technology Development
Institute( ITDI)
Industrial Technology Development
Institute( ITDI)

Prepared by:
Approved by:
Issued by STD. No part of this Manual may be reproduced, amended, or transmitted
in any form or by any means without prior written approval of the Chief of STD.

QUALITY RECORD
STANDARDS AND TESTING DIVISION
ITDI

Q.R.5.3.3.3
Page 13 of 17

PHYSICAL AND PERFORMANCE TESTING


LABORATORY

APPOINTEE'S BIODATA

Revision 4
9 Sept. 2010

VII. TRAINING PROGRAMS (Start from the most recent training.)


INCLUSIVE DATES OF
TITLE OF SEMINAR/CONFERENCE/
ATTENDANCE
NUMBER CONDUCTED/ SPONSORED BY
WORKSHOP/SHORT COURSES
(mm/dd/yyyy)
OF HOURS
(Write in full)
(Write in full)
From
To
03/15/01
03/16/01
16
Peel Strength Test for Adhesive &
Industrial Technology Development
Sealant
Institute( ITDI)
Industrial Technology Development
Tension Test of Vinyl Tiles
03/28/01
03/30/01
24
Institute (ITDI)
Adhesive Strength Test of Sealant
07/02/01
07/04/01
24
Industrial Technology Development
Institute(ITDI)
Industrial Technology Development
Adhesive Strength Test for Plastics
07/08/01
07/09/01
16
Institute(ITDI)
Seminar on Validation of Analytical
08/13/01
08/14/01
16
Industrial Technology Development
Methods
Institute(ITDI)
"Measurement Uncertainty in the
Industrial Technology Development
08/20/01
08/21/01
16
Analytical Laboratory"
Institute(ITDI)
Industrial Technology Development
"Laboratory Quality Control"
08/27/01
08/28/01
8
Institute(ITDI)
08/27/01
08/31/01
40
Industrial Technology Development
Resistance to Chemicals, Size &
Institute(ITDI)
Thickness Determination, and
Abrasion Test of Vinyl Tiles
Resistance Test to Chemicals, Size &
09/07/01
09/10/01
21
Industrial Technology Development
Thickness for Tiles
Institute(ITDI)
10/10/01
10/10/01
8
Seminar on ISO IEC 17025 "Standard
Industrial Technology Development
for Laboratory Competence"
Institute(ITDI)
Industrial Technology Development
Abrasion Test for Vinyl Tiles
12/10/01
12/10/01
4
Institute(ITDI)
04/16/02
04/16/02
8
"Awareness on STD General
Industrial Technology Development
Procedure on Technical Requirements"
Institute(ITDI)
05/06/02
16
Determination of Adhesive Strength of
Industrial Technology Development
Adhesive Tapes
Institute(ITDI)
"Toxic Substances & Hazardous
01/30/04
01/30/04
8
Industrial Technology Development
Waste Management Seminar for
Institute(ITDI)
Laboratories"
03/11/04
03/13/04
24
Fundamentals of Melt Flow Indexer
Dynisco Polymer Test-Boston Home
and HDV3Vicat Tester
Inc., Franklin, MA, USA
Documenting ISO 9001:2000 and
Industrial Technology Development
02/09/05
02/09/05
8
Fundamentals of QC Circle
Institute (ITDI)

Prepared by:
Approved by:
Issued by STD. No part of this Manual may be reproduced, amended, or transmitted
in any form or by any means without prior written approval of the Chief of STD.

Q.R.5.3.3.3

QUALITY RECORD
STANDARDS AND TESTING DIVISION
ITDI

Page 14 of 17

PHYSICAL AND PERFORMANCE TESTING


LABORATORY
Revision 4

APPOINTEE'S BIODATA

9 Sept. 2010

TRAINING PROGRAMS (Start from the most recent training)


INCLUSIVE DATES OF
ATTENDANCE
(mm/dd/yyyy)

TITLE OF
SEMINAR/CONFERENCE/WORKSHOP/SHORT
COURSES (Write in full)

From

To

NUMBER
OF
HOURS

Assuring the Quality of Test Results

03/22/2005

03/22/2005

ITDI

Calibration and Verification of


Balance

06/06/2005

06/06/2005

ITDI

Seminar on Material Testing for


Plastic & Rubber Industries

07/06/2005

07/06/2005

Gryke Scientific Instruments


Trading & Zwick/Roell

Conditioning & Sampling for


Determination of Conditioned
Grammage Paper

09/06/2005

09/06/2005

ITDI

27th Annual Scientific Meeting

07/13/2005

07/14/2005

16

National Academy of Science &


Technology

Laboratory Assessment,
Development of Conformity
Assessment System for ASEAN
Countries & Metrology in
Chemistry: Why? What? How?
Laboratory Internal Audit

12/12/2005

12/12/2005

ITDI

02/13/2006

02/13/2006

ITDI

Focus Group Discussion

02/21/2006

02/21/2006

ITDI

Seminar on The Enhancement of


the International Standardization
Activities in Asia Pacific

07/10/2006

07/14/2006

40

Japan Rubber Manufacturers


Association (JRMA), Tokyo, Japan
sponsored by BPS

69th PICHE National Convention

02/27/2008

02/29/2008

24

16th ASEAN Regional Symposium


on Chemical Engineering at the
Forefront of Global Challenges

12/01/2009

12/02/2009

16

Cebu International Convention


Center (CICC), Cebu
Manila Hotel sponsored by UST

CONDUCTED/ SPONSORED BY
(Write in full)

Prepared by:
Approved by:
Issued by STD. No part of this Manual may be reproduced, amended, or transmitted
in any form or by any means without prior written approval of the Chief of STD.

Q.R.5.3.3.3

QUALITY RECORD
STANDARDS AND TESTING DIVISION
ITDI

Page 15 of 17

PHYSICAL AND PERFORMANCE TESTING


LABORATORY
Revision 4

APPOINTEE'S BIODATA

9 Sept. 2010
TITLE OF
SEMINAR/CONFERENCE/WORKSHOP/SHORT
COURSES (Write in full)

INCLUSIVE DATES OF
ATTENDANCE
(mm/dd/yyyy)

NUMBER
OF
HOURS

CONDUCTED/ SPONSORED BY
(Write in full)

From

To

Training for Drop Weight Impact


Testing Machine

12/10/2009

12/10/2009

ITDI

ISO/IEC 17025 Internal Audit


Seminar

02/19/2009

02/20/2009

16

Metals Industry Research &


Development Center (MIRDC)

Training Course on the


mprovement of Competitiveness of
Enterprises Thru Technical Support
in Production Efficiency, Safety &
Sustainable Environmental
Protectionunder the ASEAN-Korea
Technical Cooperation Project
Awareness Seminar on ISO/IEC
17025

02/21/2010

03/06/2010

80

Korea Institute of Materials


Science (KIMS), Changwon,
South Korea

05/24/2010

05/24/2010

STD-ITDI

Determination of Tensile Strength


and Elongation of Rubber

06/04/2010

06/04/2010

STD-PPTL

ASEAN-Korea Cooperation Project


Seminar on Recent Developments
in High-Speed Rotordynamic
Systems
Echo Seminar on Sustaining
Laboratory Accreditation
Refresher Course on Internal Audit
Training on Basic Operation &
Routine Maintenance of IPT
Institute Fur Pruftechnik
Hydrostatic/Bursting Tester
Training for Operation/Maintenance
and Basic Troubleshooting of the
Q-Sun Tester
General Assembly and Seminar
Theme: PICHE + LGUs = Progress
Training on Basic Operation of
Zwick/Roell Pendulum Impact
Tester

07/13/2010

07/14/2010

18

MSD-ITDI

08/16/2010

08/16/2010

ITDI

01/10/2011
01/14/2011

01/11/2011
01/14/2011

6
4

STD-ITDI
PPTL-ITDI

01/19/2011

01/19/2011

PPTL-ITDI

9/01/2011

09/01/2011

ITDI-DOST

10/25/2011

10/25/2011

PPTL-ITDI

Prepared by:
Approved by:
Issued by STD. No part of this Manual may be reproduced, amended, or transmitted
in any form or by any means without prior written approval of the Chief of STD.

Q.R.5.3.3.3

QUALITY RECORD
STANDARDS AND TESTING DIVISION
ITDI

Page 16 of 17

PHYSICAL AND PERFORMANCE TESTING


LABORATORY
Revision 4

APPOINTEE'S BIODATA

9 Sept. 2010
TITLE OF
SEMINAR/CONFERENCE/WORKSHOP/SHORT
COURSES (Write in full)

Seminar on ptimal Health


andHepatitis B
3rd Quarter ICP-ITDI Cluster
Seminar and Meeting
General Assembly and Seminar on
Characterization of Materials
Products & Devices Using Advanced
Techniques
74th PICHE National Convention
with the Theme:Chemical
Engineers at the Forefront of
Climate Change Adaptation &
Disaster Risk Reduction

INCLUSIVE DATES OF
ATTENDANCE
(mm/dd/yyyy)

NUMBER
OF
HOURS

CONDUCTED/ SPONSORED BY
(Write in full)

From

To

06/26/2012

06/26/2012

EBD-ITDI

10/01/2012

10/01/2012

FPD -ITDI

01/18/2013

01/18/2013

EBD-ITDI

02/20/2013

02/23/2013

24

La Piazza Hotel, Legaspi City

Prepared by:
Approved by:
Issued by STD. No part of this Manual may be reproduced, amended, or transmitted
in any form or by any means without prior written approval of the Chief of STD.

QUALITY RECORD
STANDARDS AND TESTING DIVISION
ITDI

Q.R.5.3.3.3
Page 17 of 17

PHYSICAL AND PERFORMANCE TESTING


LABORATORY
Revision 4

APPOINTEE'S BIODATA

9 Sept. 2010
TITLE OF
SEMINAR/CONFERENCE/WORKSHOP/SHORT
COURSES (Write in full)

INCLUSIVE DATES OF
ATTENDANCE
(mm/dd/yyyy)

From

NUMBER
OF
HOURS

To

Prepared by:
Approved by:
Issued by STD. No part of this Manual may be reproduced, amended, or transmitted
in any form or by any means without prior written approval of the Chief of STD.

CONDUCTED/ SPONSORED BY
(Write in full)

You might also like