Professional Documents
Culture Documents
Absorben adalah cairan yang dapat melarutkan bahan yang akan diabsorpsi pada
permukaannya, baik secara fisik maupun secara reaksi kimia.Absorben sering juga disebut
sebagai cairan pencuci.
Persyaratan absorben :
1. Memiliki daya melarutkan bahan yang akan diabsorpsi yang sebesar mungkin (kebutuhan
akan cairan lebih sedikit, volume alat lebih kecil).
2. Selektif
3. Memiliki tekanan uap yang rendah
4. Tidak korosif.
5. Mempunyai viskositas yang rendah
6. Stabil secara termis.
7. Murah
http://id.wikipedia.org/wiki/Absorben
Absorben adalah cairan yang dapat melarutkan bahan yang akan diabsorpsi pada
permukaannya,baik secara fisik atau dengan reaksi kimia. Absorben (juga disebut cairan
pencuci) harus memenuhi persyaratan yang sangat beragam. Misalnya bahan itu harus :
Memiliki daya melarutkan bahan yang akan diabsorpsi yang sebesar mungkin (kebuthan
akan cairan lebih sedikit,volume alat lebih kecil)
Absorbsi merupakan salah satu proses pemisahan dengan mengontakkan campuran gas
dengan cairan sebagai penyerapnya. Penyerap tertentu akan menyerap setiap satu atau lebih
komponen gas. Pada absorbsi sendiri ada dua macam proses yaitu :
a.
Absorbsi fisik
Absorbsi fisik merupakan absorbsi dimana gas terlarut dalam cairan penyerap tidak disertai dengan
reaksi kimia. Contoh absorbsi ini adalah absorbsi gas H2S dengan air, metanol, propilen, dan
karbonat. Penyerapan terjadi karena adanya interaksi fisik, difusi gas ke dalam air, atau pelarutan
gas ke fase cair. Dari asborbsi fisik ini ada beberapa teori untuk menyatakan model mekanismenya,
yaitu :
Absorbsi kimia
Absorbsi kimia merupakan absorbsi dimana gas terlarut didalam larutan penyerap disertai dengan
adanya reaksi kimia. Contoh absorbsi ini adalah absorbsi dengan adanya larutan MEA, NaOH, K2CO3,
dan sebagainya. Aplikasi dari absorbsi kimia dapat dijumpai pada proses penyerapan gas CO2 pada
pabrik amoniak. Penggunaan absorbsi kimia pada fase kering sering digunakan untuk mengeluarkan
zat terlarut secara lebih sempurna dari campuran gasnya. Keuntungan absorbsi kimia adalah
meningkatnya koefisien perpindahan massa gas, sebagian dari perubahan ini disebabkan makin
besarnya luas efektif permukaan. Absorbsi kimia dapat juga berlangsung di daerah yang hampir
stagnan disamping penangkapan dinamik.
Hal-hal yang mempengaruhi dalam prsoses adsorbsi :
http://alexschemistry.blogspot.com/2013/03/laporan-operasi-teknik-kimia-absorbsi.html
The aims of this project is to present a comprehensive review of different processes available
and suitable for removal of CO2 from natural gas to meet LNG production specifications and
explore the capability of HYSYS process simulator to predict the CO2 removal process
operating conditions range at which hydrocarbon and chemical loss (amine solvent) can be
minimized.
The simulation results shows that increasing amine CO2 capturing capacity at low
temperature and lowering the amine residence time in the stripper, reduces the tendency for
CO2 emission and chemical (solvent) loss.
The chemical solvents and physical solvents or combination of these two have been used
extensively in existing base load LNG facilities (David Coyle et. al 2003).
Simulation of a typical amine solvent based CO2 removal plant using HYSYS process
simulator to establish optimum operating conditions that will improve process environmental
performance will be considered in detail.
This project therefore summarizes the various processes available and suitable for removal of
CO2 from natural gas to meet the LNG stringent specification of about 50-100 ppmv or 2-3%
CO2 concentration in the product stream. Different processes scalability, advantages and
disadvantages will be highlighted. Simulation of a typical amine solvent based CO2 removal
plant using HYSYS process simulator to establish optimum operating conditions that will
improve process environmental performance will be considered in detail.
High CO2 partial pressure in the feed gas (345 kpa) enhances the possibilities of employing
physical solvent, while the presence of significant amount of heavy hydrocarbon discourages
the use of physical solvent. Low CO2 partial pressures and low outlet pressure of the product
stream may favour application of chemical solvents (Tennyson et al 1977).
Removal of CO2 by physical absorption processes are based on the solubility of CO2 within
the solvents. Higher CO2 partial pressure and lower temperature favors the solubility of CO2
in the solvents (Absorbent), at these conditions complete removal of acid gas from natural
gas is possible.
Salako2005
As overall selection criteria, the characteristics of a good solvent for absorption process
fulfils the following main features: high gas solubility, high solvent selectivity, high
volatility, low effects on product and environment, high chemical stability, low cost and more
availability, non corrosive, low viscosity, non flammable and low freezing point.