Professional Documents
Culture Documents
sendmail& snmp
/sbin/init.d/sendmail stop
/sbin/init.d/SnmpMaster stop
sendmail/etc/rc.config.d/mailservs, 1 0
snmp /etc/rc.config.d/SnmpMaster, 1 0
rstatd rpcinfo /etc/inetd.conf rstat
/sbin/init.d/inetd inetd
1. EMS
EMS(Event Monitoring Service) HP-UX
MRM
(1) root
(2)/etc/opt/resmon/lbin/monconfig
(3)(MRM)Monitoring Request Manager Main Menu
MRM
=========================================================================
===
===================
===================
===================
===================
=========================================================================
===
==============
=========================================================================
===
Note: Monitoring requests let you specify the events for monitors
to report and the notification methods to use.
Select:
(S)how monitoring requests configured via monconfig
(C)heck detailed monitoring status
(L)ist descriptions of available monitors
(A)dd a monitoring request
(D)elete a monitoring request
(M)odify an existing monitoring request
(E)nable Monitoring
(K)ill (disable) monitoring
(H)elp
(Q)uit
Enter selection: [s]
monitor MRM
(1) root
(2)/etc/opt/resmon/lbin/monconfig MRM ()
(3) a (A)dd a monitoring request
(4) a
(5) 2)MINOR WARNING
(6) 4)>=
(7) 6)EMAIL
(8)monitor
(9) monitor (A)dd
(10)Client Configuration File(C)lear
(11)
(12) (S)how monitoring requests configured via monconfig
monitor
(13) MRM (C)heck detailed monitoring status
EMS 4
EMS
()
/storage/events/disks/default/0_0_1_1.15.0 is >= 2.
User Comments:
Just a test:)
Event data from monitor:
Event Time..........: Wed Jun 8 23:26:16 2005
Severity............: CRITICAL
Monitor.............: disk_em
Event #.............: 101
System..............: hpux1
Summary:
The device has been removed from the list of devices being monitored by
this monitor.
Probable Cause / Recommended Action:
The device was removed from the system, has stopped responding to the
system or it has been replaced with a device that is not supported by this
monitor.
Run ioscan to determine the state and type of the device.
Check the /var/stm/data/os_decode_xref for the information indicating
which devices are supported by this monitor.
Check other monitors to determine if they are now monitoring the
device by running /etc/opt/resmon/lbin/monconfig and using the "Check
monitoring" command.
Additional Event Data:
IP
model
Recommended Action