Professional Documents
Culture Documents
)
"G SHEDULE "
NAME OF WORK : poles at garden
B.S.R. REFF. :- NOV 2012 P.W.D.
Estimate Cost :- 10.00 lac
Tender Date :- 20-01-2014
S.No
Particular
(a) 9 Mtr.
Supply, Erection and Fixing of Hot dipped galvanised overhang (48.3 X 3.25
mm) with cap (400 X 88.9/ 114.3 X 3.25 mm ) over the existing poles.
(a) single arm overhang
Providing and laying PVC insulated and PVC sheathed cable of 1.1 KV grade
with aluminum conductor of IS: 1554 P-1 of group 2 of approved make in
3 ground as per IS: 1255 including excavation of 30 cm & 75 cm size trench 25
mm thick under layer of sand IInd class bricks covering refilling earth
compaction of earth making necessary con. Testing as reqd. size of
Amount
24
Nos
16800.0
403200.0
24
Nos
890.0
21360.0
(a)
1000
Mtr
170.0
170000.0
(b)
100
Mtr
222.0
22200.0
Nos
4250.0
8500.0
1000
Mtr
41.0
41000.0
24
Nos
6045.00
145080.00
P & F normal / high out put high pressure sodium vapour/ Metal halide /
Halogen lamp as required
150 Watt sodium lamp
24
Nos
485.00
11640.00
500
Mtr
274.00
137000.00
Plate Earthing as per IS : 3043 with G.I. plate of size 600mm x 600mm x 6.0
mm by embodying 3 to 4 mtr below the ground level with 20mm dia. G.I. 'B'
class watering pipe including all accessories like nut, bolts, reducer, nipple,
wire meshed funnel, brick masonary finished chamber covered with ferro
cement cover C.I. frame of size 300mm x 300mm complete with alternate
layers of salt and coke/charcoal, testing of earth resistance as required.
(a)
(a)
7
(a)
8
(a)
2 x 2.5 sq.mm
Providing & Fixing of IP-66 protected street light luminaries on existing
bracket suitable for HPSV/ MH Lamp, made out from powder coated single
piece die cast aluminium housing, electrochemically brightened and anodized
POT optics aluminium relector heat rsistant and toughened glass cover and
acessories like copper ballast electronic ignator, capacitor, holder prewired up
to terminal block etc. as required including making connection testing etc. as
required (without lamp).
S & laying following size"B" class G.I pipe confirming to IS: 1239 P-1 (1990)
with acessories for laying earth conductor / strip/ cable in ground / surface as
required
40 mm dia
S& laying following size earth wire/ strip in horizontal or vertical run in
ground/surface/ recess inculuding riverting, soldering, making connection etc
as required
S.No
(a)
Particular
Mtr
72.00
Amount
5040.00
(A)
(B)
(A)
Particular
(B)
(C)
(E)
(F)
(G)
(H)
(I)
(J)
(K)
UNIT
Rate Per
Nos
35000.00
Amount
(D)
Qty.
P/ F neutral bus bar of size 20mm x 3mm (300 mm length APP) with duly
covered by heat shrinkable sleeves with busbar supporters.
P & F of 2 Nos. Earth terminals including Hardware's duly interconnected with
8 SWG copper wire.
P & F of 3 Nos RYB phase indicator Resistant type complete with lamp.
P & F 6 mm thick bakilite sheet electric grade of size 600 x 450 mm (APP) or
as required including making holes for switches etc. with washers and screw
complete as required for above items.
Interconnections shall be done with 7/0.044 mm PVC copper wire duly
Crimped with aluminum Lugs.
P & F position cable gland in brass nickel plated heavy duty with three metal
washers and one rebar ring, double compression flame proof including
preparation of cable etc. as required. (1.) Cable gland 16 mm/25/mm/50mm
P & F tubular/Bullet type cable Terminal and duly Crimped with Crimping Tool
including making cable end ready for crimping and providing insulation tape
with colour code etc. As required1- Upto & including 25Sq. mm
P/F L&T make 1 Nos. Timer switch with Providing of 1.Nos Air Contracter
63 AMP M/L-4, as par degine REIL specifiction. for separate ON/OFF system
of 1 outgoing circuits (complete item as above).
Total ----------->
Total ----------->
Say Amount
EX.EN
35000.00
35000.0
1000020.0
10 lakh
COMMISSIONER
S.No
Particular
Amount
S.No
Particular
Contractor's Signature
Amount
Particular
Providing and laying PVC insulated and PVC sheathed cable of 1.1 KV grade
with aluminum conductor of IS: 1554 P-1 of group 2 of approved make in
ground as per IS: 1255 including excavation of 30 cm & 75 cm size trench 25
mm thick under layer of sand IInd class bricks covering refilling earth
compaction of earth making necessary con. Testing as reqd. size of
Plate Earthing as per IS : 3043 with G.I. plate of size 600mm x 600mm x 6.0
mm by embodying 3 to 4 mtr below the ground level with 20mm dia. G.I. 'B'
class watering pipe including all accessories like nut, bolts, reducer, nipple, wire
meshed funnel, brick masonary finished chamber covered with ferro cement
cover C.I. frame of size 300mm x 300mm complete with alternate layers of salt
and coke/charcoal, testing of earth resistance as required.
700
Mtr
151.0
105700.0
Nos
2970.0
5940.0
450
Mtr
28.0
12600.0
Particular
S & F of Technical Specifications of Designer Pole of 8.0 mtrs - Ornamental
Decorative look Designer Steel pole, made out of tubular shafts of 165 mm and
114 mm outer diameter, having step type construction. Fusion of two shafts to
be enabled by another suitable steel shaft preferably split in three parts
horizontally and having requisite stregth to make the structure mechanically
sturby and robust. The step joint should be covered by an ornamental cast iron
embellishment (as shown in drg.) and another cast iron emblishment is provided
at the base of the pole (as shown in drg.) Pole is flange plate ounting type and
has got a 16mm thick flange plate 350mm x 350mm in dimensions having four
holes to accommodate M-24 type bolts.
Pole to have a one arm
designer bracket with central stem made out of 89 mm OD tubular shaft and
street light mounting arms are made out of 50 mm OD tubular shafts (refer
drawing). Apx. 135 kgs + 10% Make- Radem/ N.D.M./ Bajaj' Bhrmani.
Rate
Per
Qty.
UNIT
Amount
17
Nos
Rate
Quoted
by me
17
Nos
Rate
Quoted
by me
S.No
Particular
Rate
Per
Qty.
UNIT
Amount
18
Nos
Rate
Quoted by
me
Total ----------->
S & F of IP 65 Rated LED street Light luminiaire with 24no's of High Power
LED with 220-240V AC operation. Die Cast Aluminum housing with UV
stabilized prismatic acrylic cover with LM6 aluminium housing. The luminaire
should be provided with in-built power unit & electronic driver. The luminaire
should be so constructed do ensure that the gear & LED modules are
replaceable, if required.
The luminaire should be suitable for side entry with pole diameter of 48mm to
60mm. No additional cooling or ventilation, apart from the cooling fins proided
on the luminaire housing, should be used within 20 to 35 DegC. The luminiare
should have proper road lighting distribution with Imax at gama angle>50
degree. The Lux level achieved should be as per B2 road classification with
uniformity of >0.3 Power Consumption should be 45W max. (including Driver
losses). Minimum CRI of 75 and Color Temp of cool white. Poer factor >90.
Philips/ Bajaj/Croptan/Suriya/Havells with 24 high power LED
Rate Quoted by me
Signature of contractor