Professional Documents
Culture Documents
Colour
Thickness
Density
Temperature ranges
Water absorption
Permeability
Glass transition
temperature
Drip resistance
A), B)
Specific electrical
insulation resistance
Peel strength test
Application examples
Thermal ageing
resistance and hot
water immersion
Lap shear strength
Resistance to thermal
cycling
V 8 / 20131219 (EN)
Thickness
Impact resistance
Pipe coating repair: For repair and rehabilitation and protection against
external corrosion of pipeline coating defects.
Tested 72h@+130C/+266F
:
No dripping of compound
8
7
A), B)
Rs100 > 10 .m [> 10 .ft]
Green
2.0 0.2 mm [80 8 mils]
1.5 0.1 g/cm [12.5 0.8 lbs/gal] (ISO 1183-1)
Operational:
-45C/-49F to +70C/+158F
Short term:
+90C/+194F
< 0.03% (ASTM D570) A)
< 0.2 g/m/day [0.29 grains/ft/day] (ASTM E96/E96M)
A), B)
- 65C/-85F
6136
6134
6130
6131
6248
Handling
Storage
Page 1 / 2
Additional
mechanical
protective
materials
High humidity
Stopaq Polyester
Degreasing
Salts and bacteria
Condensation of
water
Substrate
temperature
Steel
Bitumen
Other substrates
Cleanliness check
See specific Stopaq coating instructions for e.g. field joints, pipe
wrapping, coating repair, fittings, etc.
Wrapping
Start with removal of a small part of the release
liner and apply the Wrappingband on the
substrate. Apply Wrappingband without any
tension onto the substrate. Avoid air-enclosures.
Mould the Wrappingband tight onto the substrate
surfaces.
Release foil
Do not remove the release foil before application
of the Wrappingband. Remove just prior to
application of the Wrappingband to the surface.
Overlap of wraps
Side-by-side overlap: 10 mm [3/8]
Consecutive rolls: 50 mm [2]
Overlap on factory applied coating: see specific
Stopaq coating instructions.
Holiday detection
Immersion or
burying
Information
Documentation
Certified staff
Stopaq
performance
Long term
guarantee
V 8 / 20131219 (EN)
Page 2 / 2