Professional Documents
Culture Documents
Prices
Warranty
All prices are in Euro and are ex-works Delft and ex-taxes.
Prices are per single unit unless otherwise listed.
Note: Orders of less than 50.00 Euro incur a charge of
15.00 for administration costs, except where noted.
Calibration
Value Added Tax (VAT)
Validity
This price list is valid for quotations and pro-forma
invoices made by Kipp & Zonen or its representatives
from 1 April 2014 until 31 December 2014, subject to
changes that will be notified in advance in the form of
an updated price list with a later issue letter.
Delivery Time
Tests and calibrations of customer radiometers are
scheduled in with new instrument production. The
delivery time depends upon the individual product
and the test or calibration required.
Shipping
Please specify INCOTERMS for delivery and shipping
address, where applicable, in order for us to quote for
shipping and insurance costs. These will be itemised
on quotations and proforma invoices.
Specification
The specifications quoted in the price list are correct
at the date of issue. Kipp & Zonen reserves the right to
change specifications without notice due to product
changes and improvements. For this reason there may
sometimes be dierences between the price list and
the published brochures.
Special Documents
If special documentation, such as a notarised Certificate
of Origin, is required by the customer or for customs
purposes the documentation fees will be itemised on
quotations and proforma invoices.
Conditions
CE Certification
Quality
COPYRIGHT 2014 Kipp & Zonen B.V.
Table of contents
Radiometer Test & Calibration ............................................................................................................................................................................................. 8
Sensitivity Calibration .................................................................................................................................................................................................................
Temperature Tests ........................................................................................................................................................................................................................
Directional Error Test ...................................................................................................................................................................................................................
Data Logger Calibration ...............................................................................................................................................................................................................
Hand-Held Calibration ..................................................................................................................................................................................................................
Amplifier Calibration ....................................................................................................................................................................................................................
Replacement Certificate ..............................................................................................................................................................................................................
8
8
8
8
8
8
8
9
9
9
9
9
10
10
10
10
10
10
10
11
11
11
11
11
12
12
12
12
12
12
14
14
14
14
14
Radiometer Repairs Temperature Sensors, CNR 1, CSD, UVS, NR Lite / NR Lite2 ............................................................................................. 16
Temperature Sensor Replacement ..............................................................................................................................................................................................
Smart Interface Board Replacement ..........................................................................................................................................................................................
CNR 1 Repairs ................................................................................................................................................................................................................................
CSD Repairs ...................................................................................................................................................................................................................................
UVS Repairs ...................................................................................................................................................................................................................................
NR Lite Repairs ..............................................................................................................................................................................................................................
16
16
16
16
16
16
Solar Instruments
Description
Unit Price
When ordering please quote the calibration part number(s) plus the instrument model and serial number.
Sensitivity Calibration
0999910-1
0334710
0342710
0999910-7
0999910-4
0339710
0348710
0344710
0311710
0999910-5
0999915
0999910-6
0340720
0366710
0369702
0337710
0354710
0354711
0354712
215,00
215,00
215,00
360,00
400,00
110,00
110,00
300,00
180,00
215,00
365,00
400,00
540,00
430,00
495,00
265,00
440,00
550,00
660,00
Temperature Tests
0999920-1
0999920-2
0999920-4
Temperature test Pyranometers CM(P) 21, 22, 31; Pyrgeometers CG(R) 1, 2, 4 (from -20 C to +50 C in 8 steps of 10 C)
175,00
Extended temperature test Pyranometers CM(P) 21, 22, 31; Pyrgeometers CG(R) 1, 2, 4 (from -40 C to +50 C in 10 steps of 10 C) 385,00
Temperature test High Temperature Pyranometer CM 4 only (from -25 C to +150 C in 8 steps of 25 C)
485,00
Note: After a temperature test, a sensitivity calibration must be made
Directional error test Pyranometers CM(P) 21, 22, 31 (measured at 4 zenith angles and 4 azimuth angles)
145,00
150,00
Hand-Held Calibration
0365711
0365712
195,00
195,00
Amplifier Calibration
0365714
60,00
Replacement Certificate
0999911
Replacement Calibration Certificate (Please quote the instrument model and serial number)
Note: Copies of the original factory calibration certificates are only available for 2 years from the date of calibration
for the general conditions of sale of Kipp & Zonen B.V. please visit www.kippzonen.com
25,00
No minimum order charge
Trackers, Loggers
Part number
Description
Unit Price
The spare parts listed below can be fitted by the customer or by a Kipp & Zonen distributor.
0353770
0353771
0353772
0353774
SOLRAD
2547126
3329203
115,00
40,00
LOGBOX SD
3303091
Mounting Bracket Aluminium mounting bracket with stainless steel clamps for fixing LOGBOX SD to masts up to 50 mm
Note: A mounting bracket is supplied included with all new LOGBOX SD data loggers
for the general conditions of sale of Kipp & Zonen B.V. please visit www.kippzonen.com
30,00
Description
Unit Price
The housing spare parts listed below can be fitted by the customer or by a Kipp & Zonen distributor.
Fixing Kits
0339800
0338100
0362100
Sun Shields
9016355
9016381
0016583
0016584
0305722
20,00
25,00
25,00
20,00
125,00
14,00
7,00
16,00
9,00
Drying Cartridge Kit CMA 6, CMA 11 / CMP 6, CMP 11, CMP 21, CMP 22 / SMP11 / CGR 4 / CHP 1 / SHP1 / CUV 4, CUV 5
High Temperature Drying Cartridge Kit CM 4 only
Drying Cartridge Kit UVS-X-T
Drying Cartridge Kit UVS-X-C only
22,00
78,00
110,00
80,00
Drying Cartridge Kit CM 6B, 7B, 11, 11B, 14, 14B, 21, 22, 31 / CG 1, 2, 4 / CUV 3 / CH 1 / CSD 1, 2
25,00
Note: Kit includes cartridge, cover, o-ring, clamp spring - but not desiccant
0305165
Drying Cartridge Clamp Spring for Clip-in Drying Cartridge Kit (0305720)
10,00
10,00
4,00
4,00
15,00
Desiccant
2643960
4250024
4250025
Bird Stick
0015456
for the general conditions of sale of Kipp & Zonen B.V. please visit www.kippzonen.com
10
Description
Unit Price
The domes and CV 2 / CVF 3 parts listed below can be fitted by the customer or by a Kipp & Zonen distributor.
Outer Dome Kit CMP 6, CMP 11, CMP 21 / SMP11 / CMA 6, CMA 11 / CUV 5
Glass dome, 50 mm diameter, 2 mm thick, fitted to mounting ring
Outer Dome Kit CM 6B, 7B, 11, 11B, 14, 14B, 21 Glass dome, 50 mm diameter, 2 mm thick, fitted to mounting ring
0305168
295,00
295,00
Note: All dome kits include fixing screws and o-ring seal
Note: Domes for the CUV 4 are no longer available in the original glass. These instruments must be returned to the factory for fitting of a new dome and recalibration
Outer Dome Kit CMP 22 Quartz dome, 50 mm diameter, 4 mm thick, fitted to mounting ring
Outer Dome Kit CM 22 Quartz dome, 50 mm diameter, 4 mm thick, fitted to mounting ring
Outer Dome Kit CM 31 Quartz dome, 50 mm diameter, 2 mm thick, fitted to mounting ring
Dome Kit UVS Series Quartz dome, 36 mm diameter, 1.5 mm thick, fitted to mounting ring
1.565,00
1.565,00
1.295,00
855,00
Note: All dome kits include fixing screws and o-ring seal.
Window
0311720
0368700
45,00
345,00
Note: Calcium Fluoride is soft and slightly hygroscopic and is not suitable for long-term outdoor use
Ventilation Units
0016609
0015601
0016584
0349710
Cover CVF4
25,00
Cover CV 2 / CVF 3
100,00
Sun Shield CNF 4
20,00
CV 2 Modification Kit for old units with push-on cover
68,00
Updates mounting of CV 2 cover to CVF 3 method for easier removal of cover where problems are experienced due to harsh
environmental conditions. Includes soft o-ring, grease, special mounting bolts for radiometer, special retaining screws for cover
and instructions does not include cover
CVF4 Fixing Kit Screws and washers for securing the CVF4 feet to a mounting plate
10,00
Ventilation Fan CNF 4 / CVF4 Fan including tacho output
55,00
0378700
2682048
Note: The tacho output is not connected for the CNF 4, the original non-tacho fan is no longer supplied
2682044
85,00
Note: The tacho output is not connected for the CV 2, the original non-tacho fan is no longer supplied
2682046
2682047
2682916
Spare Filter Cap Assembly CNF 4 / CVF4 Black plastic cap/grille, coarse plastic mesh filter and fine foam filter
Spare Filters CNF 4 / CVF4 Set of 5 spare ventilation fan inlet filters
Spare Filters CV 2 / CVF 3 Set of 5 spare ventilation fan inlet filters
35,00
20,00
20,00
Shadow Rings
0346700
for the general conditions of sale of Kipp & Zonen B.V. please visit www.kippzonen.com
11
395,00
Description
Unit Price
The cables and connectors listed below directly replace those originally supplied with the radiometer.
Metal Plug & Yellow Cable 2-pin for CMP 3, CMP 6, CMP 11 / CUV 4, CUV 5
2523144
0362601
0362603
0362604
0362605
15,00
73,00
160,00
305,00
595,00
Metal Plug & Yellow Cable 4-pin for CMA 6, CMA 11 / CMP 21, CMP 22 (10K) / CGR 3, CGR 4 (10K) / CNR 2 / CNF 4
2523145
0362611
0362613
0362614
0362615
19,00
77,00
164,00
309,00
599,00
Metal Plug & Yellow Cable 8-pin for CMP 21, CMP 22 (Pt-100) / SMP3, 11 / CGR 3, CGR 4 (Pt-100) / CHP 1 / SHP1 / CNR 4
2523146
0362621
0362623
0362624
0362625
25,00
83,00
170,00
315,00
605,00
25,00
83,00
170,00
Note: Cable length for UVS is limited to 25 m of this type of cable because of voltage drop on the temperature stabilisation power supply wires
25,00
112,00
170,00
Note: Cable length for CSD 3 is limited to 25 m of this type of cable because of voltage drop on the heater power supply wires
for the general conditions of sale of Kipp & Zonen B.V. please visit www.kippzonen.com
12
25,00
83,00
170,00
315,00
Description
Unit Price
When ordering please quote the test, calibration, repair and spare part numbers that are required (if known) plus the instrument model and serial number.
The repair items listed on these pages CANNOT be fitted by the customer or by a Kipp & Zonen distributor.
After some types of repair a factory test and/or calibration must be carried out and this is shown where required. The test and/or calibration is not
included in the repair cost. Any spare parts required during the repair are fitted at the list price without any labour charge.
Connector Conversions
For radiometers with captive cables fitted in glands, and for older CSD 3 and UVS, the original style of cable is no longer available. These instruments
can be converted at the factory to use the latest style metal plugs with yellow cables. Instruments with plastic cable glands have an adaptor fitted for
the connector socket, instruments with metal cable glands have the housing modified and the socket fitted directly to the housing.
Note: The part numbers and prices below do not include a plug and cable. Matching plugs having the correct number of pins and with cable(s) of the desired
length must be ordered separately. Refer to the 'Radiometer Spare Parts - Cables' page of this Price List.
0305750
0305751
0305752
0337751
0337752
0340750
0342750
0342751
0354750
CM 6B, CM 11, CM 11B modify housing or fit adaptor. New connector socket, 2 pins. New style sun shield
CM 7B, CM 14, CM 14B, CM 21, CM 22, CM 31 / CG 1, CG 4
Modify housing or fit adaptor. New connector socket, 8 pins. New style sun shield
CG 2 modify housing or fit 2 adaptors. 2 new connector sockets, 8 pins. New style sun shield
CH 1 modify housing or fit adaptor. New connector socket, 8 pins
CUV 3 modify housing or fit adaptor. New connector socket, 2 pins. New style sun shield
CNR 1 modify housing or fit 2 adaptors. 2 new connector sockets, 8 pins
CSD 1, CSD 2 replace bottom plate and mounting arm with later type. New connector socket, 8 pins
CSD 3 with orange plug replace bottom plate. New connector socket, 8 pins
UVS with LEMO connector modify housing or fit adaptor. New connector socket, 8 pins. Modify internal wiring
215,00
255,00
375,00
325,00
215,00
375,00
290,00
260,00
340,00
135,00
Replace Cable
0344750
for the general conditions of sale of Kipp & Zonen B.V. please visit www.kippzonen.com
13
Description
Unit Price
Inspection
0338750
0338751
75,00
150,00
245,00
0354100
0356770
0363780
855,00
250,00
1.450,00
CM 6B, CM 7B, CM 11, CM 11B, CM 14, CM 14B, CM 21 replace outer glass dome
CM 22 replace outer quartz dome
CM 31 replace outer quartz dome
CMP 6, CMP 11, CMP 21 / SMP11 / CMA 6, CMA 11 / CUV 4, CUV 5 replace outer glass dome
357,00
1.565,00
1.295,00
357,00
0362775
1.565,00
210,00
295,00
760,00
1.195,00
210,00
295,00
760,00
for the general conditions of sale of Kipp & Zonen B.V. please visit www.kippzonen.com
14
50,00
50,00
50,00
45,00
50,00
45,00
45,00
Description
Unit Price
Detector Replacement
0305760
0305761
0305762
0305763
0305764
0305765
0362760
0362761
0362762
0362763
0362764
0362765
0305766
0305770
0345760
0363760
0363761
0334760
0368750
0305767
0305768
0305769
0362766
0362767
0342760
0364760
0354760-A
0354760-B
0354760-E
0354761-A
0354761-B
0354761-E
0354762-AB
0354762-AE
for the general conditions of sale of Kipp & Zonen B.V. please visit www.kippzonen.com
15
270,00
420,00
465,00
520,00
1.040,00
520,00
270,00
465,00
465,00
465,00
1.040,00
1.040,00
280,00
280,00
525,00
525,00
525,00
705,00
705,00
270,00
420,00
465,00
270,00
465,00
520,00
360,00
835,00
835,00
835,00
1.030,00
1.030,00
1.030,00
1.455,00
1.455,00
Description
Unit Price
190,00
150,00
150,00
150,00
190,00
150,00
190,00
285,00
150,00
150,00
190,00
SMP and SHP series 0 to 1 V version replace smart interface board, including calibration
SMP and SHP series 4 to 20 mA version replace smart interface board, including calibration
285,00
285,00
Note: After smart interface board replacement, a sensitivity calibration must be made
CNR 1 Repairs
0340791
0340792
370,00
555,00
CSD Repairs
0342790
0342791
0342795
0342792
320,00
80,00
125,00
175,00
UVS Repairs
0354790
0354791
0354792
240,00
550,00
550,00
NR Lite Repairs
0344770
120,00
for the general conditions of sale of Kipp & Zonen B.V. please visit www.kippzonen.com
16
17
HEAD OFFICE
Kipp & Zonen B.V.
Delftechpark 36, 2628 XH Delft
P.O. Box 507, 2600 AM Delft
The Netherlands
SALES OFFICES
Kipp & Zonen France S.A.R.L.
88 Avenue de lEurope
77184 Emerainville
France
T: +33 (0) 1 64 02 50 28
F: +33 (0) 1 64 02 50 29
kipp.france@kippzonen.com
Go to www.kippzonen.com for your local distributor or contact your local sales office
Pricelist - V1404