Professional Documents
Culture Documents
16
Release Notes
Contents
Introduction .................................................................................................................................
Installation ..................................................................................................................................
Licensing .....................................................................................................................................
Landmark
Introduction
This document contains important information and last minute changes related to COMPASS
2003.16 that is not documented elsewhere. COMPASS is an application in the Engineers Desktop
(EDT) R2003.16 release, which provides major new functionality in support of the Drilling & Well
Services applications on the shared EDM data model.
Page 2 of 18
June 2006
Landmark
System Requirements
For details, refer to the System Requirements section of the Engineers Desktop R2003.16
Drilling Summary Level Release Notes.
Page 3 of 18
June 2006
Landmark
Installation
For details, refer to the Installation section of the Engineers Desktop R2003.16 Drilling
Summary Level Release Notes.
IMPORTANT:
Engineers Desktop 2003.16.0 is a new product. If you are currently using a pre-2003.14.0 EDM database, you
must upgrade your EDM database to 2003.14.0 or 2003.14.1.0 prior to upgrading to the 2003.16.0 release. Once
the database has been upgraded to 2003.16, you will no longer be able to access it using the 2003.14 EDT
applications.
If you intend to run both 2003.14 and 2003.16 EDT applications, make a copy of your 2003.14 EDM database,
and upgrade the copy to 2003.16. That way you can access your original 2003.14 database with the 2003.14 EDT
applications, and the 2003.16 EDM database with the 2003.16 EDT applications.
Install 2003.16.0 in a different directory than the previous release. After installing EDT 2003.16.0, upgrade your
existing EDM 2003.14.0 or 2003.14.1.0 database to 2003.16.0.
Refer to the Installation section of the Engineers Desktop R2003.16.0 Drilling Summary Level Release Notes
for details.
Page 4 of 18
June 2006
Landmark
Licensing
There has been no change from the 2003.14.0 release. For details, refer to the Engineers Desktop
R2003.16 Drilling Summary Level Release Notes.
Page 5 of 18
June 2006
Landmark
Page 6 of 18
June 2006
Landmark
Although a custom survey report is based on a standard COMPASS survey report, it will not
change the standard COMPASS survey reports. A new report will be created.
The configurable column survey reports are specific to an individual user and are not stored in
the database.
Folder Attachments
Attached folders are stored as a link in the database. Attached folders that are associated with the
selected data item are displayed in the Associated Data Viewer (below the Well Explorer tree).
Double-click on the attached folder to view and select folder contents using Windows Explorer.
For example, if you have a Site selected in the Well Explorer, you can attach a link to a folder
containing files related to the Site.
Page 7 of 18
June 2006
Landmark
Page 8 of 18
June 2006
Landmark
Fixed Problems
The following item(s) were identified as problems in the previous release and have been fixed for
the COMPASS 2003.16 and the 2003.14.1.0 releases.
162833
The drop-down list to create a user defined data box (Wall Plot Composer) is only
displayed on the primary monitor.
615544
The Plan Design Properties-User Defined Tie-in allows invalid inclinations and
azimuth.
700973
Save message for plan should not appear when auto import is active in Live Link.
700975
The Save icon is activated when a design is modified and saved in another EDM
application.
701890
When the vertical section angle for a Section View plot is changed, the drillers
targets are not in the correct location.
703846
704073
The Strip Zero Inclination Interpreted Stations option on the Report Options dialog
does not function as expected.
704463
When importing survey data from a database and there is a blank column of data, the
data displayed in the wizard may be out of sync with the header after the blank
column.
714768
715204
The Filter Range (in the Offset Selection) does not filter all wells within the range.
715836
716113
When the measured depth of the definitive path is updated, the true vertical depth
should also be updated.
716735
The 10 character limit for a template name displays only half the name.
716977
Reports indicate the target is missed even when the plan hits the target.
718854
Abnormal program termination when adding well labels for all offset wells on the
Plan View.
718885
Sidetrack plans are not transferred correctly with the Live Link.
719027
Uncertainty plots do not match Uncertainty report (Compass reports and plots).
719056
Abnormal program termination when printing Wallplots on one printer and then
changing to another printer.
719302
719779
Designs can be deleted in COMPASS even though associated WELLPLAN cases are
locked.
Page 9 of 18
June 2006
Landmark
720048
OpenWorks link fails consistently on the second attempt. This issue was resolved.
720171
Formation tops for OpenWorks wells are not transferred to COMPASS using the Live
Link.
720243
720305
Project Ahead dialog fields are not updated when dialog selections change.
721714
Offset not calculated correctly for WRP when using a slant rig configuration.
721869
722257
Live View not updating when lookahead plan is used as the active design or as an
offset.
722835
Request that Compass be changed to have it save all Surveys with Survey Times set
to 00:01 like OpenWells.
723007
Incorrect ellipse sizes and anticollision separation factor when ground level is set.
723945
Need the ability to move only targets over via the live link.
726211
Annotations - The reported values are reversed when you select the %MAPEAST%
and %MAPNORTH% predefined comments.
727010
727013
If you change an existing surface location, all the survey azimuths are also changed.
727472
When a tool is edited, recomputing wellpaths may result in empty design wellpaths.
Page 10 of 18
June 2006
Landmark
Known Problems
The following are known problems for the 2003.16.0 release of COMPASS.
704457
COMPASS should not allow the addition of survey stations after projections have
been appended.
714096
722242
Slot optimizer retains designs under slots even after they are deleted from the tree.
723272
Compass crashes in Section or Plan View if you try to print while displaying more
than one design.
726411
When using Citrix, there is an error when attaching a file located on users local
drive(s).
729514
Slot Optimizer, moving well back to site assigns well to a random slot in Well
Properties.
729804
730000
730400
730663
The cost fields are editable when the survey tool is locked.
731146
731187
The Change Date field in the Wellbore Properties > Change History tab is not large
enough to accommodate the date and time. The time is truncated.
731343
When using Citrix, there is an error when importing a file located on users local
drive(s).
Page 11 of 18
June 2006
Landmark
Contacting Support
Landmark operates Technical Assistance Centers (TACs) in Australia, the United Kingdom, and
the United States. Additional support is also provided through local support offices around the
world. Local support office information is listed below. If problems cannot be resolved at the
district level, our escalation team is called to resolve your incidents quickly.
Support information is always available on the Landmark Graphics Support internet page located
at: http://css.lgc.com/CustomerSupport/CustomerSupportHome.jsp.
Technical Assistance Centers
North America
7:30 am - 5:30 pm Central Standard Time
Monday - Friday, excluding holidays
Latin America
(Spanish, Portuguese, English)
7:00 am - 5:00 pm Central Standard Time
Local normal business hours
1-713-839-3405 (Houston,TX,USA)
Fax: 713-839-3646
Email: soporte@lgc.com
Toll Free from:
Argentina: 0800-800-5263
Brazil:
0800-891-0837
Chile:
800-201-898
Colombia: 01800-915-4743
Mexico:
001-888-438-1296
Peru:
0800-51634
Trinidad:
1-888-438-1296
Venezuela: 0-800-526-3627
Toll Free from local area:
Ecuador (Quito) (02)226-1908
Page 12 of 18
June 2006
Landmark
Asia, Pacific
8:00 am - 5:00 pm Local Time
Monday-Friday, excluding holidays
10-800-6100-253
001-803-61284
00531-61-0021
1800-803-687
0800-400-555
1800-1611-0207
00308-61-0046
0080-161-1350
001-800-611-2784
213 21 37 72 39
Email: eame_helpdesk@lgc.com
Angola (Luanda)
8:00 am - 5:00 pm Local Time
Monday - Friday, excluding holidays
1-817-493-5900
Fax: 1-817-493-560
Email: eame_helpdesk@lgc.com
54-11-4312-8411
Toll Free 0800-800-5263
Fax: 54-11-4311-9566
Email: soporte@lgc.com
Australia (Perth)
8:00 am - 5:00 pm Local Time
Monday - Friday, excluding holidays
61-8-9481-4488
Toll Free 1800-448-488
Fax: 61-8-9481-1580
Email: apsupport@lgc.com
55-21-3974-4000 or
Toll Free 0800-891-0837
Fax: 55-21-3974-4002
Email: soporte@lgc.com
67-3-233-5319
Email: apsupport@lgc.com
Page 13 of 18
June 2006
Landmark
Canada (Calgary)
7:30 am - 5:30 pm Central Standard Time
Monday-Friday, excluding holidays
Colombia (Bogota)
8:00 am - 5:00 pm
Local Time
57-1-326-4000
57-1-326-6710
Toll Free 01800-915-4743
Fax: 57-1-326-6717
Email: soporte@lgc.com
Ecuador (Quito)
8:00 am - 5:00 pm
Local Time
59-32-226-1844
Toll Free from Quito (02)226-1908
Fax: 59-32-226-2590
Email: soporte@lgc.com
Egypt (Cairo)
8:00 am - 4:00 pm Local Time
Saturday - Wednesday, excluding holidays
20-2-759-1717
(ask for Landmark Technical Support)
Email: eame_helpdesk@lgc.com
91-11-622-1885
(c/o Samit Enterprises)
Fax: 91-11-647-9246
Email: apsupport@lgc.com
Indonesia (Jakarta)
7:30 am - 4:30 pm Local Time
Monday - Friday, excluding holidays
62-21-3003-9039 or
Toll Free 001-803-61284
Fax: 62-21-3003-9088
Email: apsupport@lgc.com
Japan
8:00 am - 5:00 pm Local Time
Monday - Friday, excluding holidays
603-2164-1121 or
Toll Free 1-800-803-687
Fax: 603-2164-1135
Email: apsupport@lgc.com
Page 14 of 18
June 2006
Landmark
Mexico (Reynosa)
8:00 am - 6:00 pm
Local Time
52-555-208-3533
52-555-208-3868
Toll Free 001-888-438-1296
Local Office Fax: 52-555-514-7646
Support Fax: 1-713-839-3646
Email: soporte@lgc.com
61-6-755-2318
Toll Free 0800-400-555
Fax: 64-6-755-2407
Email: apsupport@lgc.com
Nigeria (Lagos)
8:00 am - 5:00 pm Local Time
Monday - Friday, excluding holidays
234-1-461-0780
(ask for Landmark Technical Support)
Fax: 234-1-262-0769
Email: eame_helpdesk@lgc.com
86-10-8486-4501
Toll Free 10-800-6100-253 or
10-800-810-0209
Fax: 86-10-8486-4819
Email bjsupport@lgc.com
or apsupport@lgc.com
Peru (Lima)
Local normal business hours
Russia (Moscow)
7:00 am - 5:00 pm Local Time
Local Business Days, excluding holidays
7-095-960-2926
7-095-960-2927
(ask for Landmark Technical Support)
Fax: 7-095-755-8301
Email: eame_helpdesk@lgc.com
South Korea
8:00 am - 5:00 pm Local Time
Monday - Friday, excluding holidays
Taiwan
8:30 am - 5:30 pm Local Time
Monday-Friday, excluding holidays
Thailand (Bangkok)
8:00 am - 5:00pm Local Time
Monday - Friday, excluding holidays
66-2-278-8100
Toll Free 001-800-611-2784
Fax: 66-2-278-8199
Email: apsupport@lgc.com
Page 15 of 18
June 2006
Landmark
Trinidad & Tobago (TAO TAC, Houston, TX)
7:00 am - 5:00 pm Central Standard Time
(Houston, TX)
Local normal business hours
+971-4-3036446
(ask for Landmark Technical Support)
Fax: +971-4-3315837
Email:
gulf_support@lgc.com
eame_helpdesk@lgc.com
United Kingdom
8:00 am - 5:30 pm Local Time
Monday - Friday, excluding holidays
44-1372-868686 (Leatherhead)
Fax: 44-1372-868601 (Leatherhead)
Fax 44-1224-723260 (Aberdeen)
Email: eame_helpdesk@lgc.com
713-839-2200
Toll Free 1-877-435-7542
(1-877-HELP-LGC)
Fax: 713-839-2168
Email: support@lgc.com
Venezuela (Caracas)
8:00 am - 5:00 pm
Local Time
58-212-953-0774
Toll Free 0-800-526-3627
Fax: 58-212-952-3845
Email: soporte@lgc.com
84-8-910-1901
Toll Free 84-8-9191901
Fax: 84-8-910-1902
Email: apsupport@lgc.com
Website Address
http://www.lgc.com
ftp://ftp.lgc.com
http://www.oracle.com
Page 16 of 18
June 2006
Landmark
Name
Website Address
http://www.macrovision.com/support/
by_category/Software_Licensing.shtml
http://www.microsoft.com/sql/default.asp
http://www.adobe.com
Microsoft MSDE
http://www.microsoft.com/sql/default.asp
Page 17 of 18
June 2006
Landmark
Trademarks
3DFS, 3D Drill View, 3D Drill View KM, 3DView, 3D Surveillance, Active Field Surveillance, Active Reservoir
Surveillance, ADC, Advanced Data Transfer, ARIES, Asset Development Center, AssetJournal, Asset Performance,
AssetView, Atomic Meshing, Automate, BLITZ, BLITZPAK, CasingSeat, COMPASS, Contouring Assistant,
Corporate Data Archiver, Corporate Data Store, DataManager, DataStar, DBPlot, DecisionSuite, Decisionarium,
DecisionSpace, DecisionSpace AssetPlanner, DecisionSpace AssetView, DecisionSpace Atomic Meshing,
DecisionSpace Decision Management Systems(DMS), DecisionSpace Nexus, DecisionSpace PowerGrid,
DecisionSpace PowerModel, DecisionSpace PrecisionTarget, DecisionSpace Reservoir, DecisionSpace TracPlanner,
DecisionSpace Well Seismic Fusion, DepthTeam, DepthTeam Explorer, DepthTeam Express, DepthTeam Extreme,
DepthTeam Interpreter, Desktop Navigator, DESKTOP-PVT, DESKTOP-VIP, DEX, DIMS, Discovery, Discovery
Asset, Drill-to-the-Earth Model, Drillability Suite, Drilling Desktop, DrillModel, DrillVision, DSS, Dynamic
Reservoir Management, Dynamic Surveillance System, EarthCube, EDM, eLandmark, Engineers Data Model,
Engineer's Desktop, Engineers Link, Executive Assistant, ezFault, ezSurface, ezTracker, FG+, FastTrack,
FieldWorks, FZAP!, GeoDataLoad, GeoGraphix (stylized), GeoGraphix Exploration System, GeoLink, GeoProbe,
GeoProbe GF DataServer, GES, GESXplorer, GMAplus, GRIDGENR, Handheld Field Operator, I2 Enterprise,
iDIMS, IsoMap, iWellFile, Landmark, Landmark & Design, Landmark Logo & Design, Landmark Decision Center,
Landscape, Lattix, LeaseMap, LMK Resources, LogEdit, LogM, LogPrep, Magic Earth, MagicDesk, Make Great
Decisions, MathPack, MIMIC, MIMIC+, MIRA, Model Builder, MyLandmark, Nexus, Object MP, OpenBooks,
Open Explorer, OpenJournal, OpenSGM, OpenVision, OpenWells, OpenWire, OpenWorks, OpenWorks Well File,
PAL, Parallel-VIP, PetroBank, PetroWorks, PetroWorks ULTRA, PlotView, Point Gridding Plus, Pointing Dispatcher,
PostStack, PostStack ESP, PowerCalculator, PowerExplorer, PowerHub, Power Interpretation, PowerJournal,
PowerModel, PowerView, Presgraf, PRIZM, PROFILE, Project Administrator, ProMAGIC, ProMAGIC Connect,
ProMAGIC Server, ProMAX, ProMAX 2D, ProMAX 3D, ProMAX 3DPSDM, ProMAX MVA, ProMAX VSP,
pSTAx, Query Builder, Quick, Quick+, QUICKDIF, QUIKCDP, QUIKDIG, QUIKRAY, QUIKSHOT, QUIKVSP,
Quickwell, Quickwell+, RAVE, RayMap, RayMap+, RTOC, Real Freedom, Real Time Asset Management Center,
Real Time Asset Management Centre, Real Time Operations Center, Real Time Production Surveillance, Real Time
Surveillance, Reference Data Manager, Reservoir Framework Builder, RESev, ResMap, RightTime, RMS, SCAN,
SeisCube, SeisMap, SeisModel, SeisSpace, SeisVision, SeisWell, SeisWorks, SeisWorks PowerCalculator,
SeisWorks PowerJournal, SeisWorks PowerSection, SeisXchange, Sierra, Sierra (design), SigmaView, SimResults,
SIVA, SIVA+, smartSECTION, Spatializer, SpecDecomp, StrataAmp, StrataMap, StrataModel, StrataSim,
StratWorks, StressCheck, STRUCT, Surf & Connect, SynTool, SystemStart for Servers, SystemStart, SystemStart for
Clients, SystemStart for Storage, Tanks & Tubes, TDQ, Team Workspace, TERAS, Total Drilling Performance,
TOW/cs, TOW/cs Revenue Interface, TracPlanner, Trend Form Gridding, Turbo Synthetics, VESPA, VESPA+, VIP,
VIP-COMP, VIP-CORE, VIP-DUAL, VIP-ENCORE, VIP-EXECUTIVE, VIP-Local Grid Refinement, VIPTHERM, WavX, Web Editor, Well Seismic Fusion, Wellbase, Wellbore Planner, Wellbore Planner Connect,
WELLCAT, WELLPLAN, WellXchange, WOW, Xsection, You're in Control. Experience the difference, ZAP!, and
Z-MAP Plus are trademarks, registered trademarks or service marks of Landmark Graphics Corporation.
All other trademarks, service marks and product or service names are the trademarks or names of their respective
owners.
Page 18 of 18
June 2006