Professional Documents
Culture Documents
Technical Data
Operating voltage
Interface
Operating and display elements
Connections
Temperature range
Type of protection
Protection class
CE norm
Certification
Installation
Dimensions
Mounting depth
Width in modules
Weight
Housing
Housing colour
Model
Device type
Design
USB/S 1.1
Page 1 of 4
USBS_11_TD_EN_V1-0
2CDC 502 031 D0201
USB/S 1.1
Application programs
Number of
communication objects
0
USB Interface /1
Max. number of
group addresses
0
Max. number of
associations
0
Dimension drawing
Circuit diagram
1
2
3
4
USB/S 1.1
Label carrier
Programming button
Programming LED
Bus connecting terminal
Page 2 of 4
USBS_11_TD_EN_V1-0
2CDC 502 031 D0201
5 EIB LED
6 USB LED
7 USB socket
USB/S 1.1
USB Interface /1
Commissioning requirements
EIB
USB
Selection in ETS2
ABB
Communication
USB
USB/S 1.1
Page 3 of 4
USBS_11_TD_EN_V1-0
2CDC 502 031 D0201
Application description
No application program is required for
the operation of the USB/S 1.1.
For documentation purposes, ETS 3
contains a dummy application. This
application can be imported as usual
in ETS 3. A note appears on the first
parameter page stating that it is only a
dummy application.
There are no parameters or communication objects.
The physical address can be set both
locally and via the ABB i-bus.
Display
The EIB LED lights up as soon as the
ABB i-bus device is connected and
ready for operation. It flashes as soon
as telegram traffic takes place on the
ABB i-bus.
The USB LED lights up as soon as the
ABB i-bus and USB device are connected and ready for operation.
It flashes as soon as telegram traffic
takes place between the USB and
ABB i-bus.
USB/S 1.1
USB/S 1.1
Page 4 of 4
USBS_11_TD_EN_V1-0
2CDC 502 031 D0201
USB/S 1.1