Professional Documents
Culture Documents
First, make sure the BizHub 350 copier is already connected to the Network switch/hub using UTP cable (RJ45)
To set the printer subnet mask press Subnet Mask (Use the same subnet mask with the computer that will
be used as the Host or Gateway which is mentioned in the Step 2). Press ENTER when finished
To set the printer gateway press Gateway and enter the IP Address of the computer that will be used as the
host or gateway which is mentioned in the Step 2. Press ENTER when finished
Press ENTER when all settings has been set
Turn off the printer and turn it on again when requested
To exit and go to the default screen, keep on pressing ENTER until you find EXIT button. Press the EXIT
button to exit.
First, make sure that your system is already having NetBEUI protocol installed
Click Start on the taskbar, click Settings and then click Control Panel
Double-click the Network icon
Click Add and then in the Select Network Component Type choose Protocol and then click Add
In the Select Network Protocol, in the Manufacturers list, select Microsoft
And in the Network Protocols list, select NetBEUI and then click OK
After you closed the Network settings, a Insert Disk prompt will appear with a message Please insert the
disk labeled Windows 98 Second Edition CD-ROM, and then click OK.
Click OK, then in the Copy files from listbox, you may select or type in the CD path (for example E:\Win98)
or the path of the directory if you have a copy of it in your local disk (for example C:\Win98), Then click OK
again
A window with header System Setting Change will appear, asking Do you want to restart your computer
now?
Click Yes and let the computer reboot
Click Start on the taskbar, click Settings and then Printers
In the Printers folder, double-click the Add Printer icon, and in the Add Printer Wizard click Next
Choose Network Printer and click Next
Click Browse and look for the printer DNS Host Name, double-click and select the correct printer id, then
click Next
The printer DNS Host Name can be found at the printer LCD panel as below:
Utility/Counter > Admin. Management > 12345678 > Admin. 2 > Network Settings > DNS Setting
Click Have Disk, click Browse and look for the driver (*.inf) in the directory where you have store it.
Click OK > OK > Next
If A driver is already installed for this printer, choose Keep existing driver (recommended) and click
Next
Check the Printer Name and edit it if necessary and accordingly
Choose Yes or No (Optional) to set the printer as the default printer or not, then click Next
Choose Yes or No (Optional) whether you want to print a test page or not, then click Finish.
Konica Minolta BizHub 350 Installation Guide for Windows XP (Created by Malphin Voo)
Open an Internet Browser and type in the printer IP (with http:// at the beginning of the line) at the
browser address bar. For example http://196.168.11.255
Enter the administrator code (default: 12345678)
Make sure you click Log-out after you make changes on the settings or before you exit the browser
(The machine will not be able to be used while you are accessing the printer settings application from a
computer)
Konica Minolta BizHub 350 Installation Guide for Windows XP (Created by Malphin Voo)