You are on page 1of 9

ORGANIZATION PROFILE

From Proprietor Desk


Welcome to Sri Bhuvaneshwari Engineering Services.

We are pleased to introduce ourselves as a leading engineering concern started with group of
technical experts with the aim of providing engineering design, detailing, manufacturing and
supply of Vessels, Tanks, Heat Exchangers, Silencers, piping, pumping systems, Oil pre-heating
system, Chimney, Duct & Bellow and Civil with good standard codes of practice like ASME, API,
TEMA, EJMA, IS, ASW, ASTM, ANSI which is being used in various industries like Power, oil & gas,
Chemical, refinery, Water treatment, cement and pulp & paper industries.

We are arranging license for statutory equipment from explosive department and also we are
concentrating in trading covering mechanical, civil, electrical, instruments which is being used to
most industries.

GROUP COMPANY:
Our group company is Tech Weld Engineering.

Its immense pleasure in presenting our profile to the world as a manufacturing company and this
will serve as an introduction to our various products and their quality. We look forward to your
valuable communication and opportunities enabling us to serve you with our quality engineering.

Yours truly
FOR SRI BHUVANESHWARI ENGINEERING SERVICES

T.PRIYANATHAN
Proprietor., PH: +91-9791029402

Introduction:
Sri Bhuvaneshwari Engineering Services is engaged in design, detail engineering, manufacturing
and supply of various products as listed below. Our project team fully concentrating on quality of
work and our young energetic engineers are extremely flexible, they can easily adopt with scope
of work and they know the value of time and quality. Our strength is QOT-Quality on Time. We
meet the client requirement with QOT.

Our Product Range:

Fuel Storage Tank.

Steam Silencers

Acid Storage Tank.

DG Silencer

Water Storage tank.

Water treatment Filters

Gas Bullets

Duct and Bellows

Pressure Vessels

Damper

Heat Exchangers

Fans and blowers

Silencers

Steel Chimney

Storage Tanks & Bullets:


We are engaged in design, Detailing,
manufacture and supply of Storage tanks as
per ASME, API 650, IS-803 and IS 10987 to
store fluid, chemicals, petroleum products
and Gas.
Our storage tanks types:
1. Vertical Cylindrical Cone roof Self
supported Storage Tanks.
2. Horizontal Dished end, Flat end both
above and below ground storage
tanks.

Heat Exchangers:
We are engaged in design, Detailing,
manufacture and supply of Shell and Tube Heat
Exchanger as per TEMA, HEI and ASME Code of
practice.
Our Heat Exchanger Range:
1. Oil cooler and oil heater.
2. Boiler feed water heaters.
3. Vapour condenser.
Industrial Silencers:
We are engaged in design, Detailing,
manufacture and supply of Industrial Silencers
to control Steam noise as per OSHA, ASME
Code of practice.
Our Silencer Range:
1.
2.
3.
4.

Steam Drum Silencers.


Super heater safety valve silencer.
Vent silencer.
EMSV Silencer.

Pressure Vessels:
We are engaged in design, Detailing,
manufacture and supply of Pressure vessels as
per ASME and IS-2825 Code of practice.
Our Pressure Vessels Range:
1. Blow down tanks.
2. Flash Vessels.
3. Process vessels for water treatment
plant.

Duct, Damper & Bellows:


We are engaged in design, Detailing,
manufacture and supply of Duct and Vessels as
per ASME, EJMA and HVAC Code of practice.
Our Pressure Vessels Range:
1. Ducts along with supports.
2. Metallic Expansion bellows.
3. Single and multi louver dampers

Fans and Blowers:


We manufacture and supply of Fans and
blowers as per Code of practice.
Our Range:
1. ID, FD,PA & SA Fans
2. Blowers

Chimney:
We are engaged in design, Detailing, manufacture and supply of Steel Self supported Chimney as
per IS 6533 Code of practice and pollution control norms

Pumping Systems:
Sri Bhuvaneshwari Engineering Services engaged in design, detailing, manufacturing and supply of
pumping system which are widely used in industries, commercial buildings and municipalities to
provide cooling and lubricating services, to store, to drain, to transfer fluids for processing, to
provide hydraulic power to machine etc.. This typical pumping system contains components like

pump, motor, piping, flanges and fittings, valves, strainers and safety instruments. These
components completely assembled as a skid mounted unit and key factor to design this pumping
system depends upon the nature of the end-use equipment. There are many different types of
end-use equipment; example heat exchangers, Tanks and hydraulic equipment. We are focus on
the below listed items;

Fuel handling pumping system.

Fuel handling pumping and pre-heating systems

Pressure reducing station

Statutory Clearance:
We are engaged in arranging construction approval, NOC and obtaining license for statutory
equipment from explosive department. We have an extreme knowledge about on obtaining
license from explosive department based on end user requirement.

Our Trading Range:


We are concentrating in trading covering mechanical, civil, and electrical, instruments which is
being used to most industries.

Isolation, regulation and control Valves

Safety Instruments

Pump & motor

Steel Bars

Pipes and tubes

Pipe hangers

Strainers, Flexible Hose pipes, flanges and fittings

Actuator

Oil seal

Grinding and abrasive wheels

Plummer block and bearings

Conveyor Pulley, idlers and belts

Manufacturing Facilities:
We have manufacturing facilities which is being located in two place with required machinery
facilities like welding machines, plate Bending machine, Pipe bending machine, profile cutting,
drilling, grinding, sandering machines and painting facilities. We have 30-50 tonnes capacity to
fabricate equipments per months. The manufacturing process is continuously updated with latest
technology to yield higher productivity with improved quality product. Our manufacturing plant
having more than 7250 sq ft area with covered portion of 2400 sq ft. We have more than 12Nos
permanent Labour along with qualified welders and fitters.

OUR FABRICATION SHOP

Man Power Capacity:

Welders

: 5Nos

3G Qualified Welders

: 2Nos

Helpers

: 5Nos

Structural welder

: 1Nos.

Grainding people

: 2Nos

Reggars

: 3Nos

Fitter

: 1Nos.

Power Tool and Machine Capacity:

MIG Welding Machine (350Amps)

: 2Nos

TIG Welding Machine (350Amps)

: 2Nos

ESAP Welding Machine (400Amps)

: 1No.

Aluminium TIG Welding Machine (600Amps)

: 2Nos

Grainding Machine

: 2Nos

Hydraulic Bending Machine

: 1No.

Drilling machine (1 1/2" capacity)

: 1No.

Power cutting machine

: 2 Nos.

Lifting capacity

: 15 Ton

Measuring Instruments & Gauges:


We are having metrological instruments with calibration for supporting to machining the
components.
SECTION

Metal preparation Gas cutting unit

Machining unit

Setting unit

Assembly unit

Welding unit

Painting Unit

Quality & Standards:

Our qualities to the product by inspecting stage by stage of process of work and maintaining
necessary documents to provide our quality product to meet client requirement. The following
quality documents which are maintained by our quality team as detailed below.

WPS, PQR, WPQ

Quality Assurance Plan

Stage And Final Inspection Documents

Operation and Maintenance Manual

Hydraulic Test Certificate

Painting Certificate

Material Test Certificates

Our Partial List of Valuable Clients


Our valuable partial list of clients to whom we have designed, manufactured and supplied our
products so far.

Greenesol Power Systems Pvt Ltd..,

Rainbow stones Pvt Ltd..,

Asian Reprographics Pvt Ltd..,

Krishna Automation

RSN Engineering and Construction Pvt Ltd..,

Fabrimech Engineering..,

Jones Industries, Trichy.,

We look forward to your valuable communication, enquires and opportunities enabling us to


serve you with our quality engineering.

For more information, please visit our website: www.sbengineeringservices.com

You might also like