24th 26th JULY 2014 REPORT First day of the workshop was headed by Mr.Nikhil Chowdary, Technical Head, Design and Prototyping Centre, ESCI, who gave an overview of Rapid Prototyping in which he discussed in brief about the types of Rapid Prototyping or Additive Manufacturing like Fused Deposition Modeling (FDM), Stereolithography(SLA), Selective Laser Sintering (SLS), Selective Laser Melting(SLM), Electron Beam Melting(EBM) etc. Nikhil presented different applications in different industries like Aerospace, Architecture & Construction, Health care, Tissue Engineering / Bio-Printing and also purposefully explained 3D Scanning In the second session of the first day, Dr.Y.Ravi Kumar, Asst. Prof, Department of Mechanical Engg., NIT Warangal explained the different materials used and the market type for different 3D printing systems. He covered historical perspective and present scenario of 3D printing. He also discussed so many applications related to prototyping, Tooling, Metal Casting, Architectural, Medical & Dental as well as Direct part production systems. Morning session of the second day was headed by Dr.Ravi Bollina, Assoc. Prof., Mahindra Ecole Centrale College of Engg., presented a complete overview of materials and sintering process. He discussed different materials used in Metal Injection Molding(MIM). He also presented different industrial applications and the materials used for specific purposes. In the second session of second day Mr.Manish Agarwal, Director and Mr.Piyush Jain from AXELTA presented the importance of the concept Internet of Things (IOT). Later Mr.Presenjit Kundu, Design Head, M/s Dhama Innovations Pvt. Ltd displayed their new innovations based on radical Climacon technology where they used the process of 3D printing for the device. The second day was ended with Mr. H.L.Narsimha, Chief operating officer, Vasantha Tool Crafts Pvt. Ltd, which is the first company to start Sintering in tooling. He discussed about Additive Manufacturing in tool industry and presented some applications related to FMCG Packaging and displayed some end products from EOSINT M280 Machine which works based on sintering. Morning session of day three was headed by Mr.Rabinder Henry, Otto-Von Guericke Universitat, Germany. He explained 3D-printing at Nanometer level for Medical Implants holding the importance of Neuromodulation. Next Dr.Sri Ram Venkatesh, Professor & Head, Dept. of Mechanical Engg, University College of Engg, Osmania University & Director, Centre for Prototyping &Testing of Industrial Products (CPTIP) presented some concepts of reverse engineering and Dr.L.Shiva Rama Krishna,Sr.Asst.Professor, Dept. of Mechanical Engg, University College of Engg, Osmania University & Joint Director of Evaluation, University College of Engineering, discussed some of the case studies in Rapid Prototyping like Cranioplasty, Conjoined Twins where 3D printer OBJET Tempo was used and also presented about some bio-implant materials The last session of the workshop was concluded by Mr.Nikhil Chowdary informing about the available freeware i.e., CAD softwares like Googlesketchup, Autodesk 123D Design etc. Submitted by:
R.PRIYAKANTH Asst. Prof. Department of ECE, BVRITH College of Engineering for Women.