Professional Documents
Culture Documents
Product Description
The
XLamp
industrys
XM-L
highest
LED
is
the
performance,
FEATURES
Table of Contents
Characteristics........................... 2
3000mA
Low thermal resistance:
2.5C/W
Maximum junction temperature:
150C
Flux Characteristics..................... 3
Relative Spectral Power
Distribution............................... 4
Relative Flux vs. Junction
Temperature.............................. 4
Electrical Characteristics.............. 5
features:
warm white
Temperature.............................. 6
wide
symmetrical
viewing
package,
angle,
unlimited
XM-L
ANSIcompatible chromaticity
bins
LEDs
can
enable
Temperature.............................. 7
30C/85% RH
Reflow solderable -
Thermal Design.......................... 8
JEDEC JSTD020C
Notes.......................................10
Mechanical Dimensions..............12
UL-recognized component
(E349212)
Packaging.................................14
WWW.CREE.COM/XLAMP
Copyright 2010-2014 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.
Copyright
2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.
Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.
Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
www.cree.com/xlamp
Characteristics
Characteristics
Unit
C/W
Minimum
Typical
Maximum
2.5
degrees
125
mV/C
-2.1
8000
mA
3000
Reverse voltage
2.9
3.1
3.35
DC forward current
3.5
150
Copyright 2010
2010-2014
Cree,
All reserved.
rights reserved.
The information
in this document
is to
subject
to without
change notice.
withoutCree,
notice.
, logo
the Cree
logo and
aretrademarks
registered
Cree, Inc.
AllInc.
rights
The information
in this document
is subject
change
theCree
Cree
and XLamp
areXLamp
registered
trademarks
of Cree, Inc.of Cree, Inc.
Color
CCT Range
Min.
Cool White
Neutral White
5000 K
3700 K
Max.
8300 K
5000 K
80-CRI White
2600 K
4300 K
Warm White
2600 K
3700 K
85-CRI White
90-CRI White
2600 K
2600 K
3200 K
3200 K
Calculated Minimum
Luminous Flux (lm)*
Order Code
Group
Flux (lm)
1000 mA
1500 mA
2000 mA
T5
260
360
511
643
XMLAWT-00-0000-0000T5051
T6
280
388
551
692
XMLAWT-00-0000-0000T6051
U2
300
416
590
742
XMLAWT-00-0000-0000U2051
T4
240
332
472
593
XMLAWT-00-0000-000LT40E4
T5
260
360
511
643
XMLAWT-00-0000-000LT50E4
T2
200
277
393
494
XMLAWT-00-0000-000HT20E7
T3
220
305
433
544
XMLAWT-00-0000-000HT30F7
T2
200
277
393
494
XMLAWT-00-0000-000LT20E7
T3
220
305
433
544
XMLAWT-00-0000-000LT30F7
S4
164
227
323
406
XMLAWT-00-0000-000PS40E7
S5
172
238
338
425
XMLAWT-00-0000-000PS50E7
S6
182
252
358
450
XMLAWT-00-0000-000PS60E7
S4
164
227
323
406
XMLAWT-00-0000-000US40E7
S5
172
238
338
425
XMLAWT-00-0000-000US50E7
S6
182
252
358
450
XMLAWT-00-0000-000US60E7
Notes:
Cree maintains a tolerance of 7% on flux and power measurements, 0.005 on chromaticity (CCx, CCy)
measurements and 2 on CRI measurements. See the Measurements section (page 10).
Copyright 2010
2010-2014
Cree,
All reserved.
rights reserved.
The information
in this document
is to
subject
to without
change notice.
withoutCree,
notice.
, logo
the Cree
logo and
aretrademarks
registered
Cree, Inc.
AllInc.
rights
The information
in this document
is subject
change
theCree
Cree
and XLamp
areXLamp
registered
trademarks
of Cree, Inc.of Cree, Inc.
100
80
60
40
20
0
380
430
480
530
580
630
680
730
780
Wavelength (nm)
90%
80%
70%
60%
50%
40%
30%
20%
10%
0%
25
50
75
100
125
150
Copyright 2010
2010-2014
Cree,
All reserved.
rights reserved.
The information
in this document
is to
subject
to without
change notice.
withoutCree,
notice.
, logo
the Cree
logo and
aretrademarks
registered
Cree, Inc.
AllInc.
rights
The information
in this document
is subject
change
theCree
Cree
and XLamp
areXLamp
registered
trademarks
of Cree, Inc.of Cree, Inc.
2600
2400
2200
2000
1800
1600
1400
1200
1000
800
600
400
200
0
2.00
2.20
2.40
2.60
2.80
3.00
3.20
3.40
3.60
325%
300%
275%
250%
225%
Cool 200%
White
175%
150%
125%
100%
75%
50%
25%
0%
200 400 600 800 1000 1200 1400 1600 1800 2000 2200 2400 2600 2800 3000
Copyright 2010
2010-2014
Cree,
All reserved.
rights reserved.
The information
in this document
is to
subject
to without
change notice.
withoutCree,
notice.
, logo
the Cree
logo and
aretrademarks
registered
Cree, Inc.
AllInc.
rights
The information
in this document
is subject
change
theCree
Cree
and XLamp
areXLamp
registered
trademarks
of Cree, Inc.of Cree, Inc.
Cool White
Cool White
0.020
0.015
0.010
0.005
0.000
CCx
-0.005
CCy
-0.010
-0.015
-0.020
0
500
1000
1500
2000
2500
3000
Current (mA)
Warm White
Cool White
0.020
0.015
0.010
0.015
0.005
0.010
0.000
0.005
CCx
0.000
CCy
-0.005
-0.010
CCx
-0.005
-0.015
CCy
-0.010
-0.020
-0.015 0
500
1000
1500
2000
2500
3000
Current (mA)
-0.020
25
50
75
100
125
150
Tsp (C)
Warm White
Copyright 2010
2010-2014
Cree,
All reserved.
rights reserved.
The information
in this document
is to
subject
to without
change notice.
withoutCree,
notice.
, logo
the Cree
logo and
aretrademarks
registered
Cree, Inc.
AllInc.
rights
The information
in this document
is subject
change
theCree
Cree
and XLamp
areXLamp
registered
trademarks
of Cree, Inc.of Cree, Inc.
0.020
0.015
-0.020
0
500
1000
1500
2000
2500
3000
xlamp xm-l leds
Current (mA)
Warm White
Warm White
Cool White
0.020
0.020
0.015
0.015
0.010
0.010
0.005
0.005
0.000
0.000
-0.005
-0.005
CCx
CCx
CCy
CCy
-0.010
-0.010
-0.015
-0.015
-0.020
-0.020
0
25
50050
1000 75
1500 1002000
2500
125
3000
150
Current
(mA)
Tsp (C)
Relative
Chromaticity
vs. Temperature (Warm White)
Warm
White
Warm White
0.020
0.015
0.010
0.005
0.000
CCx
-0.005
CCy
-0.010
-0.015
-0.020
25
50
75
100
125
150
Tsp (C)
Copyright 2010
2010-2014
Cree,
All reserved.
rights reserved.
The information
in this document
is to
subject
to without
change notice.
withoutCree,
notice.
, logo
the Cree
logo and
aretrademarks
registered
Cree, Inc.
AllInc.
rights
The information
in this document
is subject
change
theCree
Cree
and XLamp
areXLamp
registered
trademarks
of Cree, Inc.of Cree, Inc.
100%
80%
60%
40%
20%
-100
-80
-60
-40
-20
0%
20
40
60
80
100
Angle ()
Thermal Design
The maximum forward current is determined by the thermal resistance between the LED junction and ambient. It is
crucial for the end product to be designed in a manner that minimizes the thermal resistance from the solder point to
ambient in order to optimize lamp life and optical characteristics.
3500
3000
2500
2000
1500
Thermal Design
1000
Rj-a = 7C/W
Rj-a = 10C/W
500
0
Rj-a = 4C/W
Rj-a = 15C/W
0
20
40
60
80
100
120
140
Copyright 2010
2010-2014
Cree,
All reserved.
rights reserved.
The information
in this document
is to
subject
to without
change notice.
withoutCree,
notice.
, logo
the Cree
logo and
aretrademarks
registered
Cree, Inc.
AllInc.
rights
The information
in this document
is subject
change
theCree
Cree
and XLamp
areXLamp
registered
trademarks
of Cree, Inc.of Cree, Inc.
Profile Feature
Lead-Based Solder
Lead-Free Solder
3C/second max.
3C/second max.
100C
150C
150C
200C
60-120 seconds
60-180 seconds
183C
217C
60-150 seconds
60-150 seconds
215C
260C
10-30 seconds
20-40 seconds
6C/second max.
6C/second max.
6 minutes max.
8 minutes max.
Note: All temperatures refer to the topside of the package, measured on the package body surface.
Copyright 2010
2010-2014
Cree,
All reserved.
rights reserved.
The information
in this document
is to
subject
to without
change notice.
withoutCree,
notice.
, logo
the Cree
logo and
aretrademarks
registered
Cree, Inc.
AllInc.
rights
The information
in this document
is subject
change
theCree
Cree
and XLamp
areXLamp
registered
trademarks
of Cree, Inc.of Cree, Inc.
Notes
Measurements
The luminous flux, radiant power, chromaticity and CRI measurements in this document are binning specifications
only and solely represent product measurements as of the date of shipment. These measurements will change over
time based on a number of factors that are not within Crees control and are not intended or provided as operational
specifications for the products. Calculated values are provided for informational purposes only and are not intended as
specifications.
Lumen Maintenance
Cree now uses standardized IES LM-80-08 and TM-21-11 methods for collecting long-term data and extrapolating LED
lumen maintenance. For information on the specific LM-80 data sets available for this LED, refer to the public LM-80
results document.
Please read the Long-Term Lumen Maintenance application note for more details on Crees lumen maintenance testing
and forecasting. Please read the Thermal Management application note for details on how thermal design, ambient
temperature, and drive current affect the LED junction temperature.
Moisture Sensitivity
Cree recommends keeping XLamp LEDs in the provided, resealable moisture-barrier packaging (MBP) until immediately
prior to soldering. Unopened MBPs that contain XLamp LEDs do not need special storage for moisture sensitivity.
Once the MBP is opened, XLamp XM-L LEDs may be stored as MSL 1 per JEDEC J-STD-033, meaning they have unlimited
floor life in conditions of 30 C/85% relative humidity (RH). Regardless of the storage condition, Cree recommends
sealing any unsoldered LEDs in the original MBP.
RoHS Compliance
The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to
as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU
Directive 2011/65/EC (RoHS2), as implemented January 2, 2013. RoHS Declarations for this product can be obtained
from your Cree representative or from the Product Documentation sections of www.cree.com.
REACh Compliance
REACh substances of high concern (SVHCs) information is available for this product. Since the European Chemical
Agency (ECHA) has published notice of their intent to frequently revise the SVHC listing for the foreseeable future,
please contact a Cree representative to insure you get the most up-to-date REACh SVHC Declaration. REACh banned
substance information (REACh Article 67) is also available upon request.
UL Recognized Component
Level 4 enclosure consideration. The LED package or a portion thereof has been investigated as a fire and electrical
enclosure per ANSI/UL 8750.
Copyright 2010
2010-2014
Cree,
All reserved.
rights reserved.
The information
in this document
is to
subject
to without
change notice.
withoutCree,
notice.
, logo
the Cree
logo and
aretrademarks
registered
Cree, Inc.
AllInc.
rights
The information
in this document
is subject
change
theCree
Cree
and XLamp
areXLamp
registered
trademarks
of Cree, Inc.of Cree, Inc.
10
Notes - Continued
Vision Advisory
WARNING: Do not look at exposed lamp in operation. Eye injury can result. For more information about LEDs and eye
safety, please refer to the LED Eye Safety application note.
Copyright 2010
2010-2014
Cree,
All reserved.
rights reserved.
The information
in this document
is to
subject
to without
change notice.
withoutCree,
notice.
, logo
the Cree
logo and
aretrademarks
registered
Cree, Inc.
AllInc.
rights
The information
in this document
is subject
change
theCree
Cree
and XLamp
areXLamp
registered
trademarks
of Cree, Inc.of Cree, Inc.
11
0.5
4.8
R2.26
Mechanical Dimensions
All measurements are .13 mm unless otherwise indicated.
4.7
3.9
0.6
6
NOTICE
4.7
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
NOTICE
CONTAINED WITHIN ARE THE PROPRIETARY
AND
CREE CONFIDENTIAL.
THIS PLOT AND THE INFORMATION
CONFIDENTIAL INFORMATION OF CREE,
INC.
THIS
PLOT
CONTAINED WITHIN ARE THE PROPRIETARY AND
MAY NOT BE COPIED, REPRODUCED
OR DISCLOSED
TO ANY
CONFIDENTIAL
INFORMATION
OF CREE, INC. THIS PLOT
UNAUTHORIZED PERSON WITHOUT
THENOT
WRITTEN
CONSENT
MAY
BE COPIED,
REPRODUCED OR DISCLOSED TO ANY
OF CREE INC.
UNAUTHORIZED PERSON WITHOUTTHE WRITTEN CONSENT
OF CREE INC.
0.4
Anode
BY
DESCRIPTION
REV
A
B
DATE
DESCRIPTION
4/15/10
DC
NEW
10/22/1
DDS RELEAS
Added
die
outli
11/18/1
DC
NEW RELEASE
A
Added die outline
B
ADDED DIMENSION FOR TOP
OF FLASH
C
ADDED DIMENSION
FOR
1/5/11T
DC
3.02 WAS 3.09
REVISONS
REV
0.4
D
ADDED DOME RADIUS
3.02
3.0
10/23/1
DC WAS
DC
11/15/1
0.4
RECOMMENDED STENCIL PATTERN
SHADED AREA IS OPEN
5.00
.5
FOR SHEET METAL PARTS ONLY
.X
1.5
.XX
.75
.XXX
.25
X
.5
D. CRONIN
--
--
0.73
TITLE
--
MATERIAL
--
SIZE
--
SCALE
2610-00009
SHEET
16.000
0.5
0.5
0.73
0.5
0.5
REV.
DRAWING NO.
2.8
2.8
DATE
--
5.00
3.02
DATE
APPROVED
3.8
04/9/10
CHECK
3.8
3.02
DATE
DRAWN BY
F
OF
1 /1
4.8
5.00
Anode
C
C
R2.26
Top View
4.8
4.7
3.9
4.8
3.8
3.8
0.5
Bottom View
Side View
0.5
0.6
4.7
3.9
0.6
B
B
0.5
4.8
0.5
0.5
2.782
0.4
4.7
0.4
0.4
0.4
0.4
4.7
0.4
4.8
0.4
0.5
2.782
0.4
.25
DATE
DRAWN BY
D. CRONIN
04/9/10
UNLESS OTHERWISE SPECIFIED
DATE
DIMENSIONS ARE IN
-- MILLIMETERS--AND AFTER FINISH.
DATE UNLESS SPECIFIED:
APPROVED TOLERANCE
TITLE
.XXX
.125
.XX
.25
---
X
.5
.XXX
.125
MATERIAL
FOR SHEET METAL PARTS ONLY
X
.5
THIRD ANGLE PROJECTION
.X
1.5
FOR SHEET METAL PARTS ONLY
SIZE
.XX
.75
.X
1.5
.XXX
.25
FINAL PROTECTIVE FINISH
.XX
.75
X
.5
.XXX
.25
SCALE
X
.5 16.000
SURFACE FINISH: 1.6
Pad
CHECK
--
5
6
4
5
--
460
Du
04/9/10Ph
DATE
Fa
-DATE
APPROVED
MATERIAL
DRAWING NO.
2610-0000
--
--
SURFACE
FINISH: 1.6
2
3
4
D. CRONIN
OUTLINE --DRAWING,
--
--
DATE
DRAWN BY
CHECK
Copyright 2010
2010-2014
Cree,
All reserved.
rights reserved.
The information
in this document
is to
subject
to without
change notice.
withoutCree,
notice.
, logo
the Cree
logo and
aretrademarks
registered
Cree, Inc.
AllInc.
rights
The information
in this document
is subject
change
theCree
Cree
and XLamp
areXLamp
registered
trademarks
of Cree, Inc.of Cree, Inc.
12
SHE
2.00[.079]
4.00[.157]
2
REVISIONS
NOTICE
EE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
NTAINED WITHIN ARE THE PROPRIETARY AND
NFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
Y NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
AUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT
CREE INC.
DESCRIPTION
REV
BY
DATE
APP'D
POCKET SIZE
+.10
+.0039
.0591
-.00
-.0000 [ ]
Do1.50
P2
1.75[.069]
E1
Po
Ao -
5.40mm [.213"]
Bo -
5.40mm [.213"]
Ko -
3.35mm [.132"]
3.0
5.40[.213]
Bo
3
12.00[.472]
All Cree carrier tapes conform to EIA-481D,
Automated
Component Handling
Systems
Standard.
6
5
4
3
5.50[.217]F
NOMINAL
OF CREE INC.
2.00[.079]
2.00[.079]
P2
1.50[.059]
4.00[.157]
D1
4.00[.157]
Po
8.00[.315]
P
REV
12.30 [.484]
MAX
W
10.25
[.404]
E2
REV
NOTICE
NTIAL. THIS PLOT AND THE INFORMATION
THIN ARE THE PROPRIETARY AND
INFORMATION OF CREE, INC. THIS PLOT
OPIED, REPRODUCED OR DISCLOSED TO ANY
D PERSON WITHOUTTHE WRITTEN CONSENT
5.40[.213]
3.0
A
B
Ao
.5
FOR SHEET METAL PARTS ONLY
.X
.06
.XX
.03
.XXX
.010
X
.5
SURFACE FINISH:
BY
DATE
DDS
11/8/10
DC
2/26/12
8
6
BS
Loaded Pockets
(1000 Lamps)
1.50[.059]
Phone (919) 313-5300
Fax (919) 313-5558
D1 1.50[.059]
D1
8.00[.315]
DATE
8.00[.315]
P TITLE
P
APPROVED
SIZE
REV.
DRAWING NO.
2402-00011
7.0
SCALE
DRAWING SCALE
2
SHEET
7.0
A
OF
4
1.75
3.35[.132]
3.35[.132]
3
Ko
Ko
START
12
.36[.014] D
T .36[.014]
T
MATERIAL
5.40[.213]
5.40[.213]
Ao
ANODE SIDE
4/23/10
DATE
CATHODE SIDE
4
Trailer
160mm (min) of
empty pockets
sealed with tape
(15 pockets min.)
D. CRONIN
CHECK
3.35
2
2400-00009
QTY
ITEM
2400-00009-CORE
DRAWN BY
COMMENTS
DATE
.01
.XXX
.005
APPROVED
DATE
TITLE
X
.XXX .5 .005
THIRD ANGLE PROJECTION
MATERIAL
X PARTS
.5
.03 .06
DRAWING NO.
SIZE
FINAL PROTECTIVE FINISH
.03
empty pockets with
.XXX .XX
.010
FINAL PROTECTIVE FINISH
X
.XXX .5 .010
at least 100mm
SCALE
X
.5
SURFACE FINISH: 63
SCALE
sealed by tape
DRAWING
SCALE
SURFACE FINISH: 63
DRAWING SCALE
Ao
C
4600 Silicon Drive
Durham,
N.C
27703
4600
Silicon
Drive
Durham,
N.C 27703
Phone (919)
313-5300
Phone
(919) 313-5300
Fax (919)
313-5558
Fax (919) 313-5558
XMXM
5050
CARRIER
TAPE
5050
CARRIER
TAPE
2402-00011
A
2402-00011 A
REV.
SHEET
OF
SHEET
1OF / 1
REV.
1 /1
12.4
+.2
.0
MEASURED AT HUB
330
+.25
-.75
16.4
+0.2
.0
MEASURED AT HUB
.5
FOR SHEET METAL PARTS ONLY
.X
1.5
.XX
.75
.XXX
.25
X
.5
SURFACE FINISH:
1.6
1.9.4
DATE
DRAWN BY
D. CRONIN
CHECK
21 .4
06/08/10
DATE
--
--
DATE
APPROVED
--
--
MATERIAL
TITLE
13.1 .2
--
SIZE
--
SCALE
XM LOADING SPEC
REV.
DRAWING NO.
2402-00012
SHEET
3.000
B
OF
1 /1
12.4
+1.0
-.5
MEASURED AT EDGE
60
60
REVISONS
REV
DESCRIPTION
BY
DATE
APP'D
Copyright 2010
2010-2014
Cree,
All reserved.
rights reserved.
The information
in this document
is to
subject
to without
change notice.
withoutCree,
notice.
, logo
the Cree
logo and
aretrademarks
registered
Cree, Inc.
AllInc.
rights
The information
in this document
is subject
change
theCree
Cree
and XLamp
areXLamp
registered
trademarks
of Cree, Inc.of Cree, Inc.
UNLESS OTHERWISE SPECIFIED
DRAWN BY
1 /1
APP'D
DATE
DRAWN BY
63
NOTICE
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
CONTANED WITHIN ARE THE PROPRIETARY AND
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT
OF CREE INC.
END
5.40[.213]
5.40[.213]
Bo
Bo
3.0
12.00[.472]
12.00[.472]
NOMINAL
NOMINAL
REVISONS
[.484]
10.25 12.30DESCRIPTION
12.30
[.484]
MAX
Loaded pocket
count was 750
[.404]10.25
MAX
[.404]
WANODE
E2
MADE CATHODE AND
W NOTE LARGER
E2
REV
3.35[.132]
Ko
5.50[.217]F
5.50[.217]F
APP'D
DATE
APP'D
7.0
BY
1
DATE
BoBo
- - 5.40mm
[.213"]
5.40mm
[.213"]
KoKo
- - 3.35mm
[.132"]
3.35mm
[.132"]
1.75[.069]
E1 1.75[.069]
E1
.36[.014]
T
Po
BY
POCKET
SIZE
POCKET
SIZE
AoAo
- - 5.40mm
[.213"]
5.40mm [.213"]
+.10
+.0039
Do1.50
.0591
+.0039
-.00 +.10 .0591
-.0000
[]
Do1.50
-.00
-.0000 [ ]
P2
REVISIONS
REVISIONS
DESCRIPTION
DESCRIPTION
NOTICE
CREE CONFIDENTIAL. THIS PLOT
AND THE INFORMATION
NOTICE
CONTAINED
WITHIN ARE THETHIS
PROPRIETARY
ANDINFORMATION
CREE CONFIDENTIAL.
PLOT AND THE
CONFIDENTIAL
INFORMATION
CREE,
INC. THIS PLOT
CONTAINED
WITHIN AREOF
THE
PROPRIETARY
AND
MAY NOT
BE COPIED, INFORMATION
REPRODUCEDOF
ORCREE,
DISCLOSED
TO PLOT
ANY
CONFIDENTIAL
INC. THIS
UNAUTHORIZED
PERSON
WITHOUT
THE WRITTEN
CONSENT
MAY NOT BE COPIED, REPRODUCED
OR DISCLOSED
TO ANY
OF CREE
INC.
UNAUTHORIZED
PERSON WITHOUT THE WRITTEN CONSENT
.5
D. CRONIN
CHECK
DATE
09/29/09
DATE
-APPROVED
-MATERIAL
13
--
DATE
--
TITLE
Humidity Indicator
Card (inside bag)
Packaging
Dessicant
(inside bag)
Unpackaged Reel
Vacuum-Sealed
Moisture Barrier Bag
Label with Cree Order Code,
Qty, Reel ID, PO #
Boxed Reel
Patent Label
Patent Label
Copyright 2010
2010-2014
Cree,
All reserved.
rights reserved.
The information
in this document
is to
subject
to without
change notice.
withoutCree,
notice.
, logo
the Cree
logo and
aretrademarks
registered
Cree, Inc.
AllInc.
rights
The information
in this document
is subject
change
theCree
Cree
and XLamp
areXLamp
registered
trademarks
of Cree, Inc.of Cree, Inc.
14