Professional Documents
Culture Documents
Wrtsil Services
Version
1.00
Reference
PH300
Date
01.08.2011
Document No.
ENR0004/IAA
Page
1(9)
V.A.T. FI01286311
Trade Register No. 31.232
Registered Office: Helsinki
Wrtsil Services
Version
1.00
Course specification
Reference
PH300
Date
01.08.2011
Document No.
ENR0004/IAA
Page
2(9)
Objective
A participant successfully completing this course will be able to use
ALCAP separator for his engine operational level watch. He will be
able to operate ALCAP separator, use in the lubricating oil and fuel oil
clarifier and purifier functions, to select and assess all relevant
information and take proper action. The participant will acquire and
develop a knowledge and understanding of the basic principles
governing the safe work operation of ALCAP separator, including EPC
[electronic programmable controller] data and their presentation, as
well as the system-related limitations and potential dangers. He will be
able to generate and maintain safety, to operate all basic auxiliary
machineries functions and all specific functions for clarification and
purification as well as in good running conditions, to use and select
proper maintenance and monitoring data in appropriate manner. He
will also be able to perform dismantling and overhauling. He will be
able to analyse malfunction alarms during the separator are running
as well as the sensor and alarms activated. He will be able to assess
the impact of the performance limits of sensors on the safe use of
EPC and to appreciate that the back-up system is only of limited
performance. He will be able to assess errors, inaccuracies caused by
improper working operation. Thus, he will be aware of errors in
Distribution: Wrtsil Network.
Validity: From January 8, 2011 until further notice.
Wrtsil Corporation
John Stenbergin ranta 2
P.O. Box 196, FI-00531 Helsinki
V.A.T. FI01286311
Trade Register No. 31.232
Registered Office: Helsinki
Wrtsil Services
Version
1.00
Course specification
Reference
PH300
Date
01.08.2011
Document No.
ENR0004/IAA
Page
3(9)
displayed data, errors and the possible risk to operate on EPC, and be
able to take proper action. In addition, he will have knowledge of the
basic principle of electronic programmable controller and the safe
working operation of ALCAP separator.
Course certificate
Every chief engineer, first engineer and engine operational level in
charge of an engineering watch on a ship installed with ALCAP
separator should have completed a course in the use of Alfa Laval
Clarifier And Purifier oil and fuel separator.On successful completion
of the course and assessments, a document may be issued certifying
that the holder has successfully completed a course of training which
meets or exceeds the level of knowledge and competence specified in
Section A-III/4 of STCW Code paragraph 2, 3 of Regulation III/4
forming part of engineering on watch keeping. This certificate may be
issued only by centres approved by the Administration. However, the
issuance of a certificate to an officer in charge of an engineering on
watch, in accordance with regulation III/4 of the STCW Convention,
testifies that the candidate has reached the required level of
competence.
V.A.T. FI01286311
Trade Register No. 31.232
Registered Office: Helsinki
Wrtsil Services
Version
1.00
Course specification
Reference
PH300
Date
01.08.2011
Document No.
ENR0004/IAA
Page
4(9)
using the Alfa Laval clarifier and purifier equipment. (The duration of
hands-on exercises is up to 5 hours.)
Staff requirements
The qualifications of the instructor should be in accordance with
requirements laid down in section Sec.
A- III/4 of the STCW Code.
He should also be thoroughly familiar with the operation of the
equipment to be used in the course.
V.A.T. FI01286311
Trade Register No. 31.232
Registered Office: Helsinki
Wrtsil Services
Version
1.00
Course specification
Reference
PH300
Date
01.08.2011
Document No.
ENR0004/IAA
Page
5(9)
Bibliography (B)
To be extended whenever a more extensive and in-depth bibliography
is available.
Lessons
3.0
(2.0-1.0 - - )
2. Operations
5.0
(1.5-1.0-2.5)
V.A.T. FI01286311
Trade Register No. 31.232
Registered Office: Helsinki
Wrtsil Services
Version
1.00
Course specification
Reference
PH300
Date
01.08.2011
Document No.
ENR0004/IAA
Page
6(9)
4. Principle and
Terminology
5. Troubleshooting
Total
Lessons
1.5
1.5
1.0
2.0
2.0
2.0
(2.0 - - - -)
6.0
(2.0 1.03.0)
24.0
(11.5-4.0-8.5)
L D E
(3.0-1.0 3.0)
V.A.T. FI01286311
Trade Register No. 31.232
Registered Office: Helsinki
Wrtsil Services
Version
1.00
Course specification
Reference
PH300
Date
01.08.2011
Document No.
ENR0004/IAA
Page
7(9)
PRESENTATION DATA
ALCAP
SEPARATOR
UPDATING
ALCAP
SEPARATOR
DATA
MAIN AND
AUXILIARY
MACHINERIES
OPERATIONAL
ANDFUNCTION
PRINCIPLE TYPES
OF ELECTRONIC
PROGRAMMABLE
CONTROLLER
TIME
0800 H
1000 H
DAY 1
1. Design and function
Describe the function and
principle of
separator.
Identify the sensor and alarm
indicator
Describe the manual operation
of
ALCAP and EPC monitor
DAY 2
3. Overhauled procedure
discuss the maintenance
interval of
each components.
Inlet, outlet device, separator
bowl,
discharge mechanism,
vibration,
changing oil, cleaning of parts
V.A.T. FI01286311
Trade Register No. 31.232
Registered Office: Helsinki
DAY 3
Continuation principle and
terminology Supervision and
control of EPC.
5. Trouble shooting
Describe basic operation and
function
of separator
Wrtsil Services
Version
1.00
Course specification
Reference
PH300
Date
01.08.2011
Document No.
ENR0004/IAA
Page
8(9)
1000 H
1015 H
COFFEE BREAK
C O F F E E BREAK
COFFEE BREAK
1015 H
1200 H
Exercises activities:
Setting of parameters
Automatic mode function
1200 H
1300 H
LUNCH BREAK
LUNCH BREAK
LUNCH BREAK
1300 H
1500 H
Continuation operation
describe,
starting, stopping, manual and
emergency procedures.
Describe pre-start checking
including
the parameters setting.
.
Exercises Activities:
Manual mode function
Technical reference
1500 H
1515 H
COFFEE BREAK
COFFEE BREAK
COFFEE BREAK
1515 H
1700 H
Performing malfunction
scenario
between technical, electrical
base on
the Electronic Programmable
Controller (EPC)
Assessment
Assessment
Final Assessment
NOTES:
L = Lecture, D = Demonstration, E = Exercise
Total teaching contact time: 24 hours. Short breaks can be taken between the periods as
necessary or convenient.
Additional periods of discussion/workshop can be arranged as necessary or convenient.
V.A.T. FI01286311
Trade Register No. 31.232
Registered Office: Helsinki
Wrtsil Services
Version
1.00
Course specification
Reference
PH300
Date
01.08.2011
Document No.
ENR0004/IAA
Page
9(9)
Learning objectives
The detailed teaching syllabus has been written in learning-objective
format in which the objective describes what the participant must do to
demonstrate that knowledge has been acquired. All objectives are
understood to be prefixed by the words The expected learning
outcome is that the participants are able to .
V.A.T. FI01286311
Trade Register No. 31.232
Registered Office: Helsinki