Professional Documents
Culture Documents
Description
Castrol SpheerolTM EPL range of greases are lithium-based products containing highly-refined mineral oils and fortified
with extreme pressure (EP) additives as well as corrosion and oxidation inhibitors. These greases have been formulated
with additives that provide good film strength under medium-to-high loads.
Application
The Spheerol EPL range are general-purpose greases designed for plant-wide lubrication. The range extends
from a NLGI 2 for general purpose bearing lubrication to a NLGI 0 semi-fluid grease suitable for centralized
lubrication systems and grease filled gearboxes. These greases provide good protection against rust and
corrosion as well as resistance to water wash-outwhich makes them particularly suitable for equipment where
moist or wet conditions are common.
Advantages
High mechanical stability the grease keeps its consistency in service ensuring long lubricant life.
Good adhesion continuous lubrication and reduced consumption as film stays between lubricated surfaces.
Good water resistance the grease film remains on the surface even in the presence of water.
Resistant to copper and steel corrosion helps prevent rust and oxidation on metal surfaces.
Excellent EP and anti-wear properties protects equipment against extreme loading and helps minimize bearing
component wear.
Typical Characteristics
Method
Units
EPL 0
EPL 1
EPL 2
Appearance, Visual
Amber to
brown
Amber to
brown
Amber to
brown
Thickener Type
Lithium
Lithium
Lithium
Mineral oil
Mineral oil
Mineral oil
NLGI Grade
Density @ 20C/68F
ASTM D1475
g/ml
0.890
0.895
0.900
Worked Penetration,
60 strokes @ 25C/77F
ISO 2137
ASTM D217
0.1mm
355-385
310-340
265-295
Dropping Point
ISO 2176
ASTM D2265
C/F
170/338
195/383
200/392
ISO 3104
ASTM D 445
mm /s
150-200
150-200
150-200
ASTM D1743
Rating
Pass
Pass
Pass
ISO 2160
ASTM D4048
Rating
1b
1b
1b
ASTM D2266
mm
0.45
0.45
0.45
ASTM D2596
kg
200
250
250
ASTM D1264
% loss
NA
7.0
3.5
ASTM D942
DIN 51808
Psi
DIN Classification
DIN 51502
KP0K-20
KP1K-20
KP2K-20
ISO Classification
ISO 6743/9
L-XCBEB 0
L-XBCEB 1
L-XBCEB 2
Test
Additional Information
In order to minimize potential incompatibilities when converting to a new grease, all previous lubricant should be
removed as much as possible prior to operation. During initial operation, relubrication intervals should be monitored
closely to ensure all previous lubricant is purged.
www.castrol.com/industrial