Professional Documents
Culture Documents
In this file, you can ref useful information about boeing quality management system such as
boeing quality management systemforms, tools for boeing quality management system, boeing
quality management systemstrategies If you need more assistant for boeing quality
management system, please leave your comment at the end of file.
Other useful material for boeing quality management system:
qualitymanagement123.com/23-free-ebooks-for-quality-management
qualitymanagement123.com/185-free-quality-management-forms
qualitymanagement123.com/free-98-ISO-9001-templates-and-forms
qualitymanagement123.com/top-84-quality-management-KPIs
qualitymanagement123.com/top-18-quality-management-job-descriptions
qualitymanagement123.com/86-quality-management-interview-questions-and-answers
This appendix describes the quality management system requirements for Boeing
suppliers as contained in ISO 9001 as supplemented by 9100 which includes all
IAQG sanctioned standards including but not limited to AS9100C, EN9100 and
JISQ 9100. Appendix A represents the International aerospace quality standard for
quality assurance in design, development, production, installation, and servicing.
Boeing Appendix A suppliers will be AS/EN/JISQ 9100*, "Quality Management
Systems - Requirements for Aviation, Space and Defense Organizations" certified
by an accredited Certification Body listed in the International Aerospace Quality
Group's (IAQG) OASIS database.
For Suppliers under contract for Maintenance, Repair or Overhaul (MRO), the
Seller's AS/EN?JISQ9100* certification shall have an associated CB assessment
report/package that contains evidence that Service process was assessed or will be
AS/EN 9110**, "Quality Management Systems - Requirements for Aviation
Maintenance Organizations" certified by an accredited Certification Body listed in
the International Aerospace Quality Group (IAQG) OASIS database.
*Note: 9100 includes all IAQG sanctioned standards including but not limited to
AS9100C, EN9100 and JISQ 9100.
**Note: 9110 includes all IAQG sanctioned standards Including but not limited to AS/EN
9110.
The Boeing Company currently does not recognize AS9003 for production
approvals, it has been phased out over time and therefore this Appendix is
considered "Obsolete".
AS/EN/JISQ9100* is the preferred quality management system standard. *Note:
9100 includes all IAQG sanctioned standards including but not limited to
AS9100C, EN9100 and JISQ 9100.
This appendix describes the quality management system requirements for Boeing
This appendix describes the quality management system requirements for Boeing
suppliers as contained in ISO 9001 as supplemented by 9120*.
Boeing Appendix D suppliers will be AS/EN/JISQ 9120*, "Quality Management
Systems - Requirements for Aviation, Space and Defense Distributors" certified by
an accredited Certification Body listed in the International Aerospace Quality
Group's (IAQG) OASIS database.
*Note: 9120 includes all IAQG sanctioned standards including but not limited to AS9120,
EN9120 and JISQ 9120.
*Note: 9100 includes all IAQG sanctioned standards including but not limited to AS9100C,
EN9100 and JISQ 9100.
==================
1. Check sheet
2. Control chart
Control charts, also known as Shewhart charts
(after Walter A. Shewhart) or process-behavior
charts, in statistical process control are tools used
to determine if a manufacturing or business
process is in a state of statistical control.
If analysis of the control chart indicates that the
process is currently under control (i.e., is stable,
with variation only coming from sources common
to the process), then no corrections or changes to
process control parameters are needed or desired.
3. Pareto chart
5.Ishikawa diagram
Ishikawa diagrams (also called fishbone diagrams,
herringbone diagrams, cause-and-effect diagrams, or
Fishikawa) are causal diagrams created by Kaoru
Ishikawa (1968) that show the causes of a specific event.
[1][2] Common uses of the Ishikawa diagram are product
design and quality defect prevention, to identify potential
factors causing an overall effect. Each cause or reason for
imperfection is a source of variation. Causes are usually
grouped into major categories to identify these sources of
variation. The categories typically include
People: Anyone involved with the process
Methods: How the process is performed and the
specific requirements for doing it, such as policies,
procedures, rules, regulations and laws
Machines: Any equipment, computers, tools, etc.
required to accomplish the job
Materials: Raw materials, parts, pens, paper, etc.
used to produce the final product
Measurements: Data generated from the process
that are used to evaluate its quality
Environment: The conditions, such as location,
time, temperature, and culture in which the process
operates
6. Histogram method