Professional Documents
Culture Documents
Program
Operate
Allen Bradley
Adjustable
Frequency AC Drive
Powerflex 4M
400 W
AB Powerflex 4M
AB Powerflex 4M
AB Powerflex 4M
AB Powerflex 4M
AB Powerflex 4M
AB Powerflex 4M
AB Powerflex 4M
Parameter Organization
AB Powerflex 4M
AB Powerflex 4M
Parameter Organization
d010 Process Display
The output frequency scaled by A440 [Process Factor] or by A438 [Process Time Lo] and
A439 [Process Time Hi].
AB Powerflex 4M
Parameter Organization
d012 Control In Status
AB Powerflex 4M
Parameter Organization
d020 - Analog In 0-10V
The present value of the current at I/O Terminal 15 (0.0% = 4mA, 100.0% = 20mA).
AB Powerflex 4M
AB Powerflex 4M
AB Powerflex 4M
AB Powerflex 4M
AB Powerflex 4M
AB Powerflex 4M
AB Powerflex 4M
Sets the analog input level that corresponds to P104 [Minimum Freq] if a 010V input is used by P108
Analog inversion can be accomplished by setting this value larger than
t212 [Anlg In 0-10V Hi] or by setting t201 - t202 [Digital Inx Sel] to option
15 Anlg Invert.
t212 Analog In 0 ~ 10 V Hi
Sets the analog input level that corresponds to P105 [Maximum Freq] if a 0-10V input is
used by P108 [Speed Reference].
Analog inversion can be accomplished by setting this value smaller than t211 [Anlg In 010V Lo] or by setting t201 - t202 [Digital Inx Sel] to option 15 Anlg Invert.
AB Powerflex 4M
Sets the analog input level that corresponds to P104 [Minimum Freq] if a 420mA input is used by P108 [Speed Reference].
Analog inversion can be accomplished by setting this value larger than t214
[Anlg In4-20mA Hi] or by setting t201 - t202 [Digital Inx Sel] to option 15
Anlg Invert.
Sets the analog input level that corresponds to P105 [Maximum Freq] if a 420mA input is used by P108 [Speed Reference].
Analog inversion can be accomplished by setting this value smaller than
t213 [Anlg In4-20mA Lo] or by setting t201 - t202 [Digital Inx Sel] to option
15 Anlg Invert.
AB Powerflex 4M
Sets the condition that changes the state of the output relay contacts.
AB Powerflex 4M
Sets the condition that changes the state of the output relay contacts.
Sets the trip point for the digital output relay if the value
of t221 [Relay Out Sel] is 6, 7, 8, 10 or 11.
Coupon Code
in $99 $49
https://www.udemy.com/nfi-plc-online-leaning/?couponCode=slideshare
nfi
Learn 4 PLCs in a Day
presents
4 PLCs Training
Platforms
$149
Course Link:
Thanks
www.nfiautomation.org
nfi