You are on page 1of 4

3/8/2015

Hydraulic/MechanicalDrillingJar(HMJ)|DownholeDrillingTools

Calgary 403.235.2364
Edmonton 780.435.5455
HOME

ABOUT US

PRODUCTS

CONTACT

Home Products Hydraulic / Mechanical Drilling Jar (HMJ)

Hydraulic / Mechanical Drilling Jar (HMJ)


Description:
The Challenger Hydraulic Mechanical Drilling Jar is an all-purpose Drilling jar suited for all drilling applications. This
jar is equipped with a mechanical safety latch and hydraulic delay when jarring upwards, a Mechanical latch for
jarring downwards.
The Challenger mechanical safety latch keeps the jar locked in the neutral position and eliminates unexpected
jarring while tripping or racking the jar in the derrick. Latch release settings can be adjusted to expand the range of
the jar placement in the drill string.
Hydraulic Delay while jarring upwards offers the operator the opportunity fire the jars harder or softer. Once the jar
starts the delay sequence while jarring up wards the operator can increase the pull to hit harder if desired. It should
be noted that the maximum pull during delay should not be exceeded, this limit is provided on our spec sheet.

Benefits & Features


No safety clamp is required

Jar is not effected by continuous firing , does not

Mechanical Latch will keep jar in locked position and

require long periods to cool down jars

prevents unexpected firing while tripping or making

Hydraulic delay while up jarring allows the operator

connections

to vary jarring force (impact) down hole by increasing

http://challengerdownhole.com/downholetoolproducts/hydraulicmechanicaldrillingjar/

1/4

3/8/2015

Hydraulic/MechanicalDrillingJar(HMJ)|DownholeDrillingTools

Can be used in extended reach, directional, or

or decreasing pull

horizontal wells

Mechanical section of the jar and Hydraulic section

Jar can be ran in compression or tension if required

are separately sealed from each other providing

Adjustable latch settings allow jar to be located

greater reliability

throughout drill string. (Adjusted in shop prior to

User friendly and durable design allows jars to be

shipping)

used in many applications if required, Coring, Fishing,

Standard seals in the tool are effective to 275 degrees

Air drilling

F (135 degrees C). Jars can be serviced with High

In horizontal, or high angel wells if weight can be

Temperature seals effective to 500 degrees F or 300

applied to jars they are effective in creating a impact

degrees C

Operation
Jarring up
When jarring up apply overpull to overcome the latch setting, which initiates the hydraulic delay. During this
hydraulic delay sequence the jar can be pulled harder if required which increases the impact force. See the Jar
specifications to determine maximum pull during delay.
Pick up string weight above the jar + any hole drag above jar + Jars latch setting, the jar will now come out of latch.
Example; String weight above jars 120,000 lbs. + hole drag above jars 20,000 lbs. + Jars latch setting 85,000 lbs. =
225,000 lbs. required to pull jar out of latch and begin hydraulic delay.
After impact, apply a down force to close jar re-engage latch, then repeat jarring cycle if needed.

Jarring Down;
When jarring down apply weight to Jars to overcome Down latch setting and pump open force, at this point the latch
will release in the jar allowing it to fire downwards.
Example; Slack off drill string overcoming latch setting, Down Lock setting 45,000 lbs. + pump open force (if pumps
http://challengerdownhole.com/downholetoolproducts/hydraulicmechanicaldrillingjar/

2/4

3/8/2015

Hydraulic/MechanicalDrillingJar(HMJ)|DownholeDrillingTools

are on) 20,000 lbs. = 65,000 lbs. Jars will fire down.
After impact, pick up drill string to re-latch jars and repeat if needed.

Imperial
Nominal
OD (inch

Length
(ft)

Inside
Diam

Approx.
Weight
(lbs)

Pump
Open Area
(in2)

Torsional
Limit (ft lbs)

Nominal Up
Latch Setting
(lbs)

Nominal
Down Latch
Setting (lbs)

Max Pull
During Delay
(lbs)

Tensile Yeild
(lbs)

3.50

16-31

1.25

370

6.0

10,300

0-45,000

0-15,000

50,000

190,000

4.75

16-31

2.25

680

11.80

20,000

0-60,000

0-35,000

85,000

352,000

5.25

16-31

2.25

700

11.80

24,000

0-60,000

0-35,000

85,000

352,000

6.25

18-31

2.25

1,400

19.6

46,500

0-90,000

0-45,000

160,000

803,000

6.75

18-31

2.75

1,500

23.8

48,000

0-100,000

0-50,000

190,000

860,500

8.00

19-31

2.81

2,200

30.7

79,600

0-120,000

0-55,000

240,000

950,000

9.00

19-31

3.00

3,200

38.5

162,500

0-120,000

0-55,000

240,000

1,288,000

Length
(m)

Inside
Diam

Approx.
Weight
(kg)

Pump Open
Area (mm2)

Torsional
Limit (N-m)

Nominal Up
Latch Setting
(daN)

Nominal
Down Latch
Setting (daN)

Metric
Nominal
OD (inch)

http://challengerdownhole.com/downholetoolproducts/hydraulicmechanicaldrillingjar/

Max Pull
During Delay
(daN)

Tensile Yeild
(daN)

3/4

3/8/2015

Hydraulic/MechanicalDrillingJar(HMJ)|DownholeDrillingTools

89

4.9-9.4

31.8

170

3,900

14,000

0-20,000

0-14,800

22,200

84,500

121

4.9-9.4

57.2

300

7,600

27,100

0-26,000

0-15,500

37,800

156,600

133

4.9-9.4

58

650

7,600

33,100

0-26,000

0-15,500

37,800

180,500

159

5.4-9.4

57.2

630

12,700

65,800

0-42,000

0-20,000

71,200

357,200

165

5.5-9.4

57.2

660

12,700

71,000

0-40,000

0-20,000

71,200

357,200

171

5.5-9.4

69.9

700

15,300

66,200

0-45,000

0-22,000

84,500

382,800

203

3.0-9.4

71.4

1,000

19,800

108,000

0-50,000

0-25,000

106,700

422,600

229

3.0-9.4

76.2

1,400

24,800

220,300

0-50,000

0-25,000

106,700

572,900

Email

Print

Google

Facebook

LinkedIn

Twitter

Copyright 2011 - 2015. All Rights Reserved. Challenger Downhole Tools.

http://challengerdownhole.com/downholetoolproducts/hydraulicmechanicaldrillingjar/

More

Website By: Impact Graphics

4/4

You might also like