Professional Documents
Culture Documents
Introduction
LCT(Local Craft Terminal) is used for setup,managing,monitor and control Pasolink NEO PDH/SDH
microwave radio system.
Hardware Requirement of PC
OS :Windows 2000/XP
IE6.0 SP2
Java Runtine Environment V1.5.0_05 or higher
2007-01-17
Note:
1. Before connecting the LCT, you need to
start to instal the USB drvier, Java 2 Runtime and
the Dial-up.
2.Dont perform the dial-up setup before USB
driver installation has not been completed.
2007-01-17
User ID
Passwork
Privilege
Admin
********
User
(non password)
2007-01-17
No Selected
Selected
Symbol
LCT Menu:
Note:
*1 Only provides for SDH STM-1 OPT interface
*22 Only provides for 1+1 configuration
*3 Only provides for SDH APS (optional) for STM-1 OPT interface
*4 Only provides for PDH
2007-01-17
Displayed in HS only
Displayed in HS/Twin Path
*1 Not applied
*2 Not displayed on LCT
January 17, 2007
10
2007-01-17
*1 Not applied
11
Displayed in HS only
Displayed in HS/Twin Path
12
2007-01-17
13
14
2007-01-17
15
16
2007-01-17
17
18
2007-01-17
Note:
From INPUT3 to INPUT6 can be assigned to Cluster IN4 to Cluster IN1.
Note:
From OUTPUT1 to OUTPUT4 can be assigned to HK OUT1 to HK OUT4.
From OUTPUT1 to OUTPUT4 can be used to Cluster OUT1 to Cluster OUT4.
19
20
10
2007-01-17
STM-1 (O)
STM-1 (E)
E3
21
22
11
2007-01-17
23
24
12
2007-01-17
25
26
13
2007-01-17
Channel Setting 1
Channel Setting 2
BER Threshold Setting
SC Assignment
LAN Port Setting
TX Power Control
Condition for TX/RX SW
Relay Setting
TCN Threshold (15min)
TCN Threshold(1day)
PMON Select
Others
A Setup is possible
* MDI/MDI-X is selected according to the
cable type or terminal type to be used
(Straight or cross type).
27
Channel Setting 1
Channel Setting 2
BER Threshold Setting
SC Assignment
LAN Port Setting
TX Power Control
Condition for TX/RX SW
Relay Setting
TCN Threshold (15min)
TCN Threshold(1day)
PMON Select
Others
1.
2.
3.
4.
5.
28
14
2007-01-17
Channel Setting 1
Channel Setting 2
BER Threshold Setting
SC Assignment
LAN Port Setting
TX Power Control
Condition for TX/RX SW
Relay Setting
TCN Threshold (15min)
TCN Threshold(1day)
PMON Select
Others
29
Channel Setting 1
Channel Setting 2
BER Threshold Setting
SC Assignment
LAN Port Setting
TX Power Control
Condition for TX/RX SW
Relay Setting
TCN Threshold (15min)
TCN Threshold(1day)
PMON Select
Others
30
15
2007-01-17
31
SC Assignment
STM-1 Setting
TX Power Control
Condition for TX/RX SW
Condition for APS
Relay Setting
TCN Threshold (15min)
TCN Threshold(1day)
PMON Select
Others
1.
2.
3.
4.
5.
32
16
2007-01-17
33
34
17
2007-01-17
Note:
1 No.1
1.
No 1 and No.2
No 2 are indicated only for 1+1 configuration.
configuration
2. Both TX Power values of No.1 and No.2 are indicated in Twinpath configuration only.
3. TX Power value * is indicated for standby ODU in HS configuration.
4. Power supply voltage of the ODU DC input varies depending on IF cable length.
5. During total number of erroneous bits and total number of correctly received bits are calculating, Calculating is displayed.
35
36
18
2007-01-17
RX Level
Total
RMON(Line)(15min)
RMON(Line)(1day)
RMON(DMR)(15min)
( )( y)
RMON(DMR)(1day)
37
RX Level (24H/15min)
RX Level (7days/day)
Total (24H/15min)
Total (7days/day)
RMON(Line)(15min)
RMON(Line)(1day)
RMON(DMR)(15min)
RMON(DMR)(1day)
38
19
2007-01-17
RX Level (24H/15min)
RX Level (7days/day)
Total (24H/15min)
Total (7days/day)
RMON(Line)(15min)
RMON(Line)(1day)
RMON(DMR)(15min)
RMON(DMR)(1day)
39
40
20
2007-01-17
41
42
21
2007-01-17
END
Thanks!
43
22