Professional Documents
Culture Documents
01
PERFORM ELECTRICAL SINGLE PHASE WIRING
DUTY NO.
DUTY
01.01
CARRY OUT SINGLE PHASE SURFACE WIRING
TASK NO.
TASK
LEVEL
L1
PERFORMANCE STANDARD:
Carry out single phase surface wiring using electrical hand tools, electrical
equipments, electrical materials etc. so that single phase surface wiring,
installation of accessories, fitting and testing is carried out according to IEE
regulation and specification.
SUB TASK/STEP
ENABLING REQUIREMENT
(Knowledge, Skill, Attitude & Safety)
Knowledge of:
2.1 Building structure
2.2 Blue print
Ability to:
2.1 Identify the correct location
2.2 Interpreter blue print/wiring drawing
3. Prepare tools,
equipments and
materials
Knowledge of:
3.1 Electrical hand tools
3.2 Electrical equipments
3.3 Electrical materials
Ability to:
3.1 Select electrical hand tools
3.2 Select electrical equipments
3.3 Select electrical materials
Attitude / safety:
3.1 Personal protection equipments
Knowledge of:
4.1 correct materials
4.2 Tools and equipments
4.3 wiring drawing according to SOP and IEE
regulation
Ability to:
4.1 Select and use correct wiring materials
4.2 Select and use wiring tools and
equipments needed
4.3 Carry out wiring work according to wiring
drawing and IEE regulation
Attitude/safety:
4.1 Personal protection equipment
4.2 General safety
17
18
SUB TASK/STEP
ENABLING REQUIREMENT
(Knowledge, Skill, Attitude & Safety)
4.3 Work shop/environment safety rule and
regulation
Knowledge of:
6.1 Testing procedure
6.2 IEE regulation
Ability to:
6.1 Carry out insulation/polarity and continuity test
6.2 Carry out installation inspection
Attitude/safety:
6.1 IEE rule and regulation
6.2 General safety
6.3 Workshop/environment safety rule and
regulation.
18
ENABLING REQUIREMENT
(Knowledge, Skill, Attitude & Safety)
Knowledge of:
1.1 Electrical symbol
1.2 IEE regulation
1.3 Wiring connection
Ability to:
1.1 Get drawing from Supervisor/superior
Knowledge of:
2.1 Building structure
2.2 Blue print
Ability to:
2.1 Identify the correct location
2.2 Interpret blue print and wiring drawing
Knowledge of:
4.1 Electrical hand tools
4.2 Electrical equipments
4.3 Electrical material
Ability to:
3.1 Select electrical hand tools
3.2 Select electrical equipments
4.4 Select electrical material
Attitude/safety:
Personal Protection Equipments
Knowledge of:
4.1 Correct materials
4.2 Tools and equipments
4.3 Wiring drawing according to SOP/IEE
regulation
Ability to:
4.1 Select and use materials
4.2 Select and use wiring tools and
equipments
4.3 Carry out wiring work according to drawing
and IEE regulation
Attitude/safety:
4.1 Personal Protection Equipment
4.2 General safety
4.3 Work shop/environment safety rule and
regulation
19
SUB TASK/STEP
5.
ENABLING REQUIREMENT
(Knowledge, Skill, Attitude & Safety)
Knowledge of:
5.1 Electrical accessories
5.2 Electrical fittings
5.3 Wiring drawing
Ability to:
5.1 Select and fix electrical accessories
5.2 Select and fix electrical fittings
5.3 Apply IEE regulation to terminate control
cables, accessories and fittings
Attitude/safety:
5.1 Personal Protection Equipment
5.2 General safety
5.3 Work shop/environment
Knowledge of:
6.1 Testing procedure
6.2 IEE regulation
6.4 Standard Operating Procedure
Ability to:
6.1 Carry out insulation, polarity and continuity
test
6.2 Carry out installation inspection
Attitude/safety:
6.1 Safety regulation
6.2 Personal Protection Equipment
6.3 IEE rule and regulation
20
ENABLING REQUIREMENT
(Knowledge, Skill, Attitude & Safety)
Knowledge of:
1.1 Electrical symbol
1.2 Institute of Electrical Engineering
regulation
1.3 Wiring connection
Ability to:
1.1 Get drawing from Supervisor/superior
Knowledge of:
2.1 Building structure
2.2 Blue print/layout
Ability to:
2.1 Identify the correct location
2.2 Interpreter blue print and wiring drawing
Knowledge of
4.1 Electrical hand tools
4.2 Electrical equipments
4.3 Electrical materials
Ability to:
3.1 Select electrical hand tools
3.2 Select electrical equipments
3.3 Select electrical materials such as cable,
fittings, conduit junction box and accessories
Attitude/safety:
3.1 Personal Protection Equipments
Knowledge of;
4.1 Correct materials
4.2 Tools and equipments
4.3 Wiring drawing according to SOP/IEE
Ability to:
4.1 Select and use electrical conduit materials
4.2 Select tools and equipments
4.3 Carry out wiring work according to wiring
drawing and IEE regulation
Attitude/safety:
4.1 Personal Protection Equipment
4.2 General safety
4.4 Work shop/environment safety rule and
regulation
21
SUB TASK/STEP
ENABLING REQUIREMENT
(Knowledge, Skill, Attitude & Safety)
Knowledge of:
5.1 Electrical accessories
5.2 Electrical fittings
5.3 Wiring drawing
Ability to:
5.1 Select and fix electrical accessories
5.2 Select and fix electrical fittings
5.3 Apply IEE regulation to terminate cables to
electrical accessories and fittings
5.4 Type of installation and testing
Attitude/safety:
5.1 Personal Protection Equipment
5.2 General safety
5.3 Work shop and environment
Knowledge of:
6.1 Testing procedure
6.2 IEE regulation
6.1 Standard operating procedure
Ability to:
6.1 Carry out insulation, polarity and continuity
test
6.2 Carry out installation inspection
Attitude/safety:
6.1 Safety regulation
6.2 Personal protection Equipment
6.3 IEE rule and regulation
22
SUB TASK/STEP
1. Identify actual location
through blue print
Knowledge of:
1.1 Blue print
Ability to:
1.1 Interpret blue print
2. Confirm number of
circuit/load
Knowledge of:
2.1 Type of circuit/connection
2.3 Type of load/connection
Ability to:
2.1 Identify type of circuit/controls
2.2 Calculate electrical load/circuit
Knowledge of:
3.1 Building structure
3.1 Blue print
Ability to:
3.1 Identify correct location
3.2 Interpret blue print/wiring drawing
Knowledge of:
6.1 Accessories, fittings and tools
6.2 Accessories connection and function of tools
Ability to:
4.1 Identify accessories and fitting
4.2 Identify connection terminal
Knowledge of:
5.1 Operation of hand tools and equipment
5.2 Blue print
Ability to:
5.1 Identify type of hand tools and equipment
5.2 Interpret blue print
Attitude/safety:
5.1 Personal protection equipment
5.2 General safety
5.3 Work shop and environment safety rules and
regulation
Knowledge of:
6.1 Cable color code
6.2 IEE regulation
6.3 Standard operating procedure
23
SUB TASK/STEP
ENABLING REQUIREMENT
(Knowledge, Skill, Attitude & Safety)
Ability to:
6.1 Identify cable color code
6.2 Interpret wiring drawing
6.4 Inspect cable termination and installation
Attitude/safety:
6.1 Safety regulation
6.2 Personal Protection Equipment
6.3 IEE rule and regulation
24
25