Professional Documents
Culture Documents
This Certificate is subject to terms and conditions overleaf. Any significant change in design or construction may render this Certificate invalid.
The validity date relates to the Type Approval Certificate and not to the approval of equipment/systems installed.
If any person suffers loss or damage which is proved to have been caused by any negligent act or omission of Det Norske Veritas, then Det Norske Veritas shall pay compensation to such
person for his proved direct loss or damage. However, the compensation shall not exceed an amount equal to ten times the fee charged for the service in question, provided that the maximum
compensation shall never exceed USD 2 million. In this provision "Det Norske Veritas" shall mean the Foundation Det Norske Veritas as well as all its subsidiaries, directors, officers,
employees, agents and any other acting on behalf of Det Norske Veritas.
DET NORSKE VERITAS AS, Veritasveien 1, NO-1322 Hvik, Norway, Tel.: +47 67 57 99 00, Org.No. NO 945 748 931 MVA.
Form No.: TA 1411a Issue: 2013-10
www.dnv.com
Page 1 of 3
Manufactured at
Master links to be manufactured at one of the following plants in the Crosby Group:
Place of manufacture
Lebus Manufacturing, Longview, Texas, USA
McKissick Products, Tulsa, Oklahoma, USA
Crosby Canada Ltd., Brampton, Ontario, Canada
Crosby Europe NV, Putte (Mechelen), Belgium
Responsibility
The Holder of Certificate takes responsibility that both design and production at all places of manufacture are in compliance with
the Rules, Standards and/or Regulations listed on page 1 of this Type Approval Certificate.
Product description
Links for use in Lifting Sets for Offshore Containers certified to DNV 2.7-1 Offshore Containers.
Detailed product information and range of certified products covered by this Type Approval are listed in Appendix 1 of this Type
Approval Certificate.
Application/Limitation
Tests to be carried out:
Production testing: According to DNV Standard for Certification No. 2.7-1, EN standard EN 1677-4 "Components for
slings Safety - Part 4; Links, Grade 8 and Quality control procedure No. 4331, Rev. 9 in agreement with the DNV
surveyor.
Material to be impact tested by Charpy impact method according to DNV 2.7-1 Offshore Containers, Chapter 8.4.
For application of links the minimum working load limit (WLL) shall be decided according to the strength requirements for lifting
sets on offshore containers as given in DNV 2.7-1 Offshore Containers, Chapter 8.
The manufacturer shall issue product certificates according to Sec. 8.5 in DNV 2.7-1, using the certificate form listed below. This
certificate form is only to be used for links certified according to this Type Approval.
Marking of product
Marking should be according to DNV 2.7-1 Offshore Containers, Chapter 8, EN 1677-4 "Components for slings Safety - Part 4;
Links, Grade 8 and Crosby QC procedure 4331, Rev. 9.
Periodical assessment
In order to maintain the validity of the type approval, certificate retension surveys are to be carried out according to DNV 2.7-1.
END OF CERTIFICATE
DET NORSKE VERITAS AS, Veritasveien 1, NO-1322 Hvik, Norway, Tel.: +47 67 57 99 00, Org.No. NO 945 748 931 MVA.
Form No.: TA 1411a Issue: 2013-10
www.dnv.com
Page 2 of 3
Appendix 1
Product description and details
WLL
[lbs]
36,200
54,300
84,900
102,600
MPF
[lbs]
90,500
135,750
212,250
256,500
Min. BF
[lbs]
144,800
217,200
339,600
410,400
WLL
[t]
1.6
2.12
3.15
5.3
6.0
8.0
11.2
13.0
16.0
21.2
25.0
31.5
32.0
40.0
MPF
[t]
4.0
5.3
7.88
13.25
15.0
20.0
28.0
32.5
40.0
53.0
62.5
78.8
80.0
100.0
Min. BF
[t]
6.4
8.48
12.6
21.2
24.0
32.0
44.8
52.0
64.0
84.8
100.0
126.0
128.0
160.0
P/N
Type
1262701
1262710
1262729
1262738
1262751
1262747
1262756
1262765
1262774
1262783
1262792
1262804
1262797
1262813
344
344
344
344
344
344
344
344
344
344
344
344
344
344
Dia.
[mm]
12
13
17
19
22
22
25
28
31
36
40
45
45
51
MPF
[lbs]
Min. BF
[lbs]
90,500
135,750
212,250
256,500
144,800
217,200
339,600
410,400
WLL
[t]
MPF
[t]
Min. BF
[t]
2.36
3.15
4.25
4.5
6.7
11.2
17.0
23.6
31.5
45.0
5.9
7.88
10.63
11.3
16.75
28.0
42.5
59.0
78.8
112.5
9.44
12.6
17.0
18.0
26.8
44.8
68.0
94.4
126.0
180.0
DET NORSKE VERITAS AS, Veritasveien 1, NO-1322 Hvik, Norway, Tel.: +47 67 57 99 00, Org.No. NO 945 748 931 MVA.
Form No.: TA 1411a Issue: 2013-10
www.dnv.com
Page 3 of 3