Professional Documents
Culture Documents
BUTTERGOAL
BBG-175
Product Description
The Buttergoal BBG-175 is a compact and light
weight design shut-off valve used in fire protection
systems, providing a visual indication of whether the
valve is open or closed according to NFPA recommendations.
BUCHANNON butterfly valves have been designed
with a slow close hand wheel operator, which effectively minimizes water hammer. These valves feature
minimum flow restriction and pressure loss when in
the fully open position. This valve have cut groove
inlet and outlet connections that are suitable for use
with grooved end pipe couplings that are listed and
approved for fire protection.
Approvals
FM
APPROVED
Technical Data
Model: Buttergoal BBG-175
Connections:
Limited Warranty
Products manufactured by Buchannon Corporation are warranted solely to the original Buyer for two (2) years against defects in material and workmanship when
properly installed and maintained under normal use and service. The warranty will
expire two (2) years from date of shipment by Buchannon Corporation.
This warranty is limited to replacing or repairing the defective product, after evaluation in Buchannon Corporation designated facility, within 2 years after delivery to
the original buyer; which shall be returned with transportation charges prepaid for
examination and inspection to determine the product defect.
No warranty is given for products which have been subject to misuse, improper
installation, corrosion, negligence or accident,or which have not been installed, maintained, modified or repaired in any manner outside of Buchannon Corporation factory
or designated facility or which has been used in a manner contrary to Buchannon
Corporation instructions, recommendations and/or the standards of any other Authorities Having Jurisdiction.
This warranty is made expressly in lieu of any other warranties, expressed or implied,
including any implied warranty of merchantability or fitness for a particular purpose.
Buchannon Corporation nor authorizes any person neither assumes, any other liability in connection with the sale of products or parts of products, such as incidental or
consequential damages for lost profits, lost sales, injury to person or property or any
other incidental or consequential loss, and in no event shall Buchannon Corporation
liability exceed an amount equal to the sales price. Items purchased by Buchannon
Corporation and resold will have the original equipment manufacturers warranty
extended to Buchannon Corporation customers where applicable. Buchannon Corporation shall not be responsible for design errors due to inaccurate or incomplete
information supplied by the Buyer or Buyers representatives.
Sizes: 2
BUCHANNON CORPORATION
www.buchannoncorporation.com
8077 A Drive St
TX 76011. Phone: (000) 000-0000
Fax: (000) 000-000
Ordering Procedure
To place an order, please indicate the full product name. Please specify the quantity, valve model
number and size using part number from the following list.
Valve Size
Part Number
BBG-20
Material Specifications
Materials
Component
Material
Specification
Body
Bronze
ASTM B505
Disc
ASTM D2000
Indicator
Brass
ASTM B16
Housing
Steel
ASTM A619
Handwheel
Steel
ASTM A619
Stem
Stainless Steel
ASTM A564
Type Xm12
Nominal Dimensions
Size(in/mm) A
2
4.5
(114)
2.4
(60.3)
2.3
(57.15)
2.5
(64)
2.3
(59)
1.9
(49)
2.5
(64)
Installation Diagram
S-1
Fire Alarm
Control Panel
Supervisory Circuit
Common (White)
Open (Yellow)
Closed (Red)
(Green)
S-2
Voltage
Source
Common (Black)
End of Line
Resistor or
Next Device
Closed (Orange)
Open (Blue)
Aux. Device
(Bell or Horn)
SWITCH #1
SWITCH #2
BUCHANNON CORPORATION
www.buchannoncorporation.com
8077 A Drive St
TX 76011. Phone: (000) 000-0000
Fax: (000) 000-000
Design Requirements
To ensure best operating conditions, Buchannon butterfly valves must be connected
to the piping system with approved couplings or flange adapters following Buchannon directions, and complying with regulations from the authorty having jurisdiction.
This valve may be positioned in any direction and flow may be from either direction.
Buchannon butterfly valves have been designed to ensure a minimum pressure loss
and flow restriction during operation on fully open position. Furthermore, the valve
also features a slow close hand wheel gear operator which minimizes water hammering.
Switch Installation
Buchannons butterfly valves provide internal supervisor position switches. The tamper switch operates by cam connected to the valve stem. The switch will change
position and close within two (2) full turn of the hand from the fully open position.
BUCHANNON CORPORATION
www.buchannoncorporation.com
8077 A Drive St
TX 76011. Phone: (000) 000-0000
Fax: (000) 000-000
force to seat the valve, as it may distort components or score the sealing surface. Avoid the use
of excessive force to open or close the valve as it
fails to comply with all warranties whether express
or implied. In order to avoid excessive stress on
the valve body, provide adequate support to the
inlet and oulet pipe adjacent to the valve. Under
no circumstances the valve should not be used to
force a pipeline into position as this may damage
or distort the valve body. Conduit and electrical
connections to the optional tamper switch must be
in accordance with requirements of the local authority having jurisdiction. The installing contractor
or product manufacturer should be contacted relative to any questions.