Professional Documents
Culture Documents
Academic Proforma
2012/2013
Bachelor of Chemical Engineering Technology
(Biotechnology) with Honours
Faculty of Engineering Technology
Information contained in this proforma is true at the time of printing and the University has the
right to make any ammendment according to needs.
All rights reserved. No part of this proforma may be reproduced in any form or by any means,
electronic, photocopying, recording, visual, or otherwise, without prior written permission of
the Vice Chancellor of Universiti Tun Hussein Onn Malaysia.
Contents
Welcoming Address from the Vice Chancellor
Welcoming Address from the Deputy Vice Chancellor (Academic and International)
Welcoming Address from the Dean of Faculty of Engineering Technology
Vision
Mission
Education Philosophy of University
Logo of the University
Board of Directors
Senate Members
Introduction to Faculty of Engineering Technology
List of Staff of Faculty of Engineering Technology
Curriculum of Bachelor of Chemical Engineering Technology (Biotechnology) with
Honours
Synopsis of Courses
1
2
3
4
5
6
8
9
14
15
Thank you.
Thank you.
Vision
Towards a world class university in engineering, science and technology for sustainable
development
Mission
UTHM is committed to generate and disseminate knowledge, to meet the needs of industry and
community and nurturing creative and innovative human capital, based on tauhidic paradigm
Courage
Co-operation/Loyalty
Quality/Prestige
Repository of knowledge
Science and technology
Knowledge
Levels of study
Resilience and its relation to global characteristics
Confidence
Members
Professor Dato' Dr. Mohd. Noh bin Dalimin
Vice-Chancellor
Universiti Tun Hussein Onn Malaysia
Dato' Sri Sufri bin Hj Mohd Zin
Executive Chairman
TRC Synergy Berhad
Major General (R) Dato' Md. Ismail bin Ahmad Khan
Managing Director
TALHIS-K Sdn. Bhd.
Dato' Abd. Shukor bin Ibrahim
Project Manager
e-Procurement Unit
Ministry of Finance Malaysia
Dato' Ir. Hj. Wahab bin Suhaili
Chairman
Wahba Group Sdn. Bhd.
Professor Dr. Shamsuddin bin Baharin
Director
Division of Industry Relation
Ministry of Higher Education
Dr. Pang Chau Leong
Director
Department of Skills Development
Ministry of Human Resources Malaysia
Professor Ir. Dr. Hj. Abas bin Abdul Wahab
Professor Faculty of Mechanical and Manufacturing Engineering,
Universiti Tun Hussein Onn Malaysia
Mr. Jamalulail bin Abu Bakar
Director
Division of Student Affair and Development
Ministry of Higher Education Malaysia
Secretary
Tuan Haji Sulam bin Hamid
Registrar
Senate Members
Chairman
Professor Dato' Dr. Mohd. Noh bin Dalimin
Vice Chancellor
Members
Professor Ir. Dr. Abdul Aziz bin Dato' Abdul Samad
Deputy Vice Chancellor (Academic and International)
Professor Dr. Wahid bin Razzaly
Deputy Vice Chancellor (Research and Innovation)
Professor Ir. Dr. Amir Hashim bin Mohd Kassim
Assistant Vice Chancellor (Student Affairs and Alumni)
Professor Dr. Hashim bin Saim
Assistant Vice Chancellor (Industry and Community Relations)
Professor Dr. Ahmad Shakri bin Mat Seman
Dean Centre for Graduate Studies
Associate Professor Dr. Ahmad Tarmizi bin Abd Karim
Dean Faculty of Civil and Environmental Engineering
Professor Hj. Ayob bin Hj. Johari
Dean Faculty of Electrical and Electronic Engineering
Associate Professor Dr. Yusri bin Yusof
Dean Faculty of Mechanical and Manufacturing Engineering
Associate Professor Sr. Dr. David Martin @ Daud Juanil
Dean Faculty of Technology Management and Business
Dr. Razali bin Hassan
Acting Dean Faculty of Technical and Vocational Education
Professor Dr. Rosziati binti Ibrahim
Dean Faculty of Computer Science and Information Technology
Associate Professor Dr. Azme bin Khamis
Dean Faculty of Science, Technology and Human Development
Associate Professor Dr. Ishak bin Baba
Dean Faculty of Engineering Technology
Professor Ab. Aziz bin Abd. Latiff
Dean Centre for Diploma Studies
Dr. Sh Salleh bin Sh Ahmad
Dean Centre for Academic Development
Associate Professor Hj. Kamarudin bin Khalid
Director Centre for Co-Curriculum and Culture
Professor Emeritus Dato' Dr. Hj. Ismail bin Hj. Bakar
Faculty of Civil and Environmental Engineering
Professor Dr. Mohammad Zarar bin Mohamed Jenu
Faculty of Electrical and Electronic Engineering
6
DEAN
DEPUTY DEAN
(P&P, HEPA)
DEPUTY DEAN
(A&A)
Head of Dept.
Mechanical
Eng Tech
Head of Dept.
Civil Eng
Tech
Head of
Programmes
Head of
Programmes
Administration
Head of Dept.
Electrical
Eng Tech
Head of Dept.
Chemical
Eng Tech
Head of
Programmes
Head of
Programmes
10
11
Supporting Staff
Pn. Masayu binti Maslan
BSc. (Biotechnology) (UM)
12
13
Curriculum
Curriculum of Bachelor of Chemical Engineering Technology (Biotechnology) with Honours
Table 1. Curriculum summary for Bachelor of Chemical Engineering Technology (Biotechnology) with Honours
Year Semester
II
III
II
II
II
Course code
Courses
Credit
UWA10302
Islamic and Asian Civilisations
UWB10x02
Foreign Language
UWB10102
Academic English
UQ*1xx01
Co-Curriculum I
BWM12203
Mathematics for Engineering Technology I
BWM12603
Physics for Engineering Technology
BWM12703
Chemistry for Engineering Technology
BNQ10102
Introduction to Chemical Engineering Technology
UWB10202
Effective Communication
UWB20302
Technical Writing
UWS10103
Nationhood and Current Development of Malaysia*
UWS10202
Ethnic Relations*
BWM12303
Mathematics for Engineering Technology II
BNQ10203
Organic and Analytical Chemistry
BNQ10303
Fluid Mechanics
BNQ10402
Creativity and Innovation
BNN10103
Introduction to Biotechnology
UWA10102/UWA10202 Islamic Studies/ Moral Studies
UQ*1xx01
Co-Curriculum II
BWM22502
Statistics for Engineering Technology
BNQ20103
Chemical Engineering Thermodynamics
BNQ20203
Heat Transfer
BNQ20303
Mass Transfer
BNQ20402
Nature Conservation
BNQ20502
Occupational Safety and Health
BPK30902
Engineering Economy
BNQ20603
Chemical Process and Sustainability
BNQ20703
Chemical Reaction Engineering
BNQ20803
Separation Engineering Technology
BNN20103
Biomolecular Techniques
BNN20203
Principles of Biochemistry
BNQ30103
Fermentation Engineering Technology
BNQ30203
Process Engineering
BNQ30303
Reactor Engineering Technology
BNQ30403
Process Plant and Equipment Design
BNN30103
Cells and Tissues Engineering Technology
BNN30203
Solid and Wastewater Bioremediation
BNQ30512
Industrial Training
BNQ40102
Technologist and Society
BNQ40203
Bachelor Project I
BNQ40303
Process Instrumentation
BNN40103
Enzyme Technology
BNN40203
Pharmaceutical Formulation
BNN40303
Traditional Knowledge and Biotechnology
BPK20802
Entrepreneurship
BNQ40405
Bachelor Project II
BNN40403
Bioproduct Design and Development
BNN40503
Environmental Monitoring
BNN40603
Food Industry and Biotechnology
BNN40702
Quality Control (Biotechnology)
2
2
2
1
3
3
3
2
2
2
3
2
3
3
3
2
3
2
1
2
3
3
3
2
2
2
3
3
3
3
3
3
3
3
3
3
3
12
2
3
3
3
3
3
2
5
3
3
3
2
14
Total
18
18
18
17
18
12
17
18
141
References
1. Saifullah Mohd Sawi (2009), Sejarah Dan Tamadun Islam Di Asia Tenggara, Shah Alam
Karisma Publications. Call no.: BP63.A785 .S24 2009
2. Sazelin Arif, (2007), Tamadun Islam Dan Tamadun Asia, Shah Alam, Selangor: McGraw
Hill. Call no.: BP190.5 .T35 2007
3. Abu al-Fida al Hafiz Ismail ibn Kathir; penterjemah Zaidah Mohd Nor et al., (2005),
Sejarah Tamadun Islam Ibn Kathir, Kuala Lumpur: Dewan Bahasa dan Pustaka. Call no.:
DS36.85.I32 2005 v.1
4. Mohd Liki Hamid, (2003), Pengajian Tamadun Islam, Bentong: PTS Publications and
Distributors. Call no.: DS36.85 .P46 2003
5. Lok, Chong Hoe, (1998), Tamadun Cina : Falsafah, Pandangan Hidup Dan Aspek-Aspek
Kesenian, Kuala Lumpur: Pusat pembangunan dan Pendidikan Komuniti (CEDC) dan
Sekretariat Falsafah dan Sains Islam. Universiti Sains Malaysia. Call no.: DS721 .L64 1998
6. Rajakrishnan Ramasamy, M Rajantheran. (1994). Pengantar Tamadun India. Kuala
Lumpur: Penerbit Fajar Bakti. Call no.: DS425 .R34 1994
7. Arkoun, Mohammed Ruslani (2001), Kontemporer: Menuju Dialog Antara Agama.
Yogyakarta: Pustaka Pelajar. Call no.: BP163 .A74 2001 N
15
Year 1 Semester I
Year 1 Semester I
6.
7.
Abdullah, Mustaffa Siti Rohaya Sarnap Siti Sujinah Sarnap. 2006. Cara mudah belajar
Bahasa Arab. Singapore: Jahabersa. (PJ6106 .A22 2006)
Abu 'Amiir 'Izzat. 2008. Kamus adik: bahasa Melayu-bahasa Inggeris-bahasa Arab.
Kuala Terengganu: Pustaka Darul Iman. (PJ6640 ABU 2008)
Mohd Azani Ghazali, Abdul Aziz Hassan @ Yahya. 2000. Kamus ringkas Bahasa MelayuBahasa Arab. Johor Bahru: Jahabersa. (PL5091.8 .A7 .M393 2000 rd)
Year 1 Semester I
5.
Year 1 Semester I
5.
Robert Di Donato 2004. Deutsch, Na Klar! Boston: McGraw-Hill. (PF3112. D36 2004)
3.
4.
5.
Swan, Michael, Walter, Catherine (2004). How English Works: A Grammar Practice
Book.Oxford: Oxford University Press. Call no.: PE1128.S92 2004.
Richards, Cynthia (2002). Panduan dan Praktis MUET: Malaysian University English
Test.Petaling Jaya: Longman. Call no.: PE1128.P26 2002.
Majlis Peperiksaan Malaysia (2002). Koleksi Kertas Soalan MUET (800). December
2001.Petaling Jaya: Pearson Education Malaysia Sdn. Bhd. Call no.: PE1128.K643 2002.
Pfeiffer, William S. (2000). Technical Writing: A Practical Approach. New Jersey:
Prentice-Hall. Call no.: PE1475.P47 2000.
UQ*1xxx1 Co-Curriculum I
Synopsis
This course is offered in the form of multiple choice of activities for Diploma students and
undergraduates. Eight categories of activities are offered which are Public Speaking,
Entrepreneurship, Sports, Community Service, Volunteering, Leadership, Cultural, Effort and
Innovation.
Year 1 Semester I
2.
Year 1 Semester I
20
4.
5.
21
Year 1 Semester I
3.
Year 1 Semester II
3.
4.
5.
Nazaruddin Mohd Jali, Marof Redzuan, Asnarulkhadi Abu Samah dan Ismail Mohd
Rashid (2005). Pengajian Malaysia. Petaling Jaya: Prentice Hall. Call no.: DS596.6 .P46
2001 N2
Noor Aziah Mohd. Awal (2003). Pengenalan kepada Sistem Perundangan di Malaysia.
Petaling Jaya: International Law Book Services. Call no.: KPG68 .N66 2003
Ruslan Zainudin, Mohd Mahadee Ismail dan Zaini Othman (2005). Kenegaraan Malaysia.
Shah Alam: Fajar Bakti. Call no.: JQ715 .R87 2005
Zahrul Akmal Damin, Fauziah Ani, Lutfan Jaes, Khairunesa Isa, Siti Sarawati Johar,
Harliana Halim, Khairul Azman Mohd Suhaimy, Shamsaadal Sholeh Saad, Ku Hasnan Ku
Halim dan Mohd Akbal Abdullah (2009). Kenegaraan & Pembangunan Malaysia. Batu
Pahat: Penerbit UTHM. (Modul Kenegaraan dan Pembangunan Mutakhir Malaysia)
23
Year 1 Semester II
2.
Year 1 Semester II
References
1. Kuldeep Singh (2003) Engineering Mathematics through Applications. Industrial Press,
Inc. Call no.: TA330.K84 2003
2. Lopez, R. J. (2001) Advanced Engineering Mathematics. Addision Wesley. Call no.:
TA330.L66 2001
3. ONeil, P. V. (2003) Advanced Engineering Mathematics. 5th Ed. Thomson Brooks/ Cole.
Call no.: TA330.O53 2003
4. Stroud, K. A. & Booth, D.J. (2003) Further Engineering Mathematics. 4th Ed. US: Palgrave
Macmillan. Call no.: QA39.3.S77 2003
5. Stroud, K. A. & Booth, D.J. (2007) Engineering Mathematics. 6th Ed. US: Palgrave
Macmillan. Call no.: TA330.S77 2007
4.
5.
Nevers, N.D. (2005).Fluid Mechanics for Chemical Engineers, 3rded. McGraw Hill, NY.
Call no.: QC145.2 .N48 2005
Panton, Ronald L. (1984). Incompressible Flow.John Wiley. Call no.: TA357 .P35 1984 N2
Darby, Ron. (2001). Chemical Engineering Fluid Mechanics. 2nd Ed. New York: Marcel
Dekker. Call no.: TP155.7 .D37 2001
Year 1 Semester II
3.
25
26
References
1. Eow Boon Hin. (2002). Moral Education. Longman. (LC268 .E48 2008)
2. Ahmad Khamis. (1999). Etika Untuk Institusi Pengajian Tinggi. Kuala Lumpur: Kumpulan
Budiman. (LC315.M3 .A35 1999)
3. Mohd Nasir Omar. (1986). Falsafah Akhlak, Penerbit Universiti Kebangsaan Malaysia /
2010, Bangi. (BJ1291 .M524 2010).
4. Hussain Othman. (2009). Wacana Asasi Agama dan Sains. Batu. Pahat: Penerbit UTHM.
(BL240.3 .H87 2009 a)
5. Hussain Othman, S.M. Dawilah Al-Edrus, Berhannudin M. Salleh, Abdullah Sulaiman,
(2009). PBL Untuk Pembangunan Komuniti Lestari. Batu Pahat: Penerbit UTHM.
(LB1027.42 .P76 2009 a)
UQ*1xxx1 Co-Curriculum II
Synopsis
This course is offered in the form of multiple choice of activities for Diploma students and
undergraduates. Three categories of activities offered are Sports and Recreational, Club/
Associations and Uniform Bodies.
Year 2 Semester I
Sampling distribution difference between two methods, Test sampling distribution: t, chi-square
distribution and F-estimation: Estimation of point of estimation, confidence interval for single
difference mean, difference between two means, single variance and ratio of two variance.
Hipothesis test: Hyphothesis test on single difference mean, between two means, single variance
and ratio of two variance. Simple linear regression: graphical method, simple linear regression
model.
Year 2 Semester I
References
1. Bluman, Allan G. (2012). Elementary Statistics: A Step by Step Approach. McGraw-Hill,
New York. Call no.: XX(117331.1)
2. Montgomery, Douglas C. Runger, George C. (2011) Applied Statistics and Probability for
Engineers. John Wiley & Sons. Call no.: QA276.12 .M664 2011
3. Khor Seng Chye. (1986). Matematik A (Statistik) STPM. Johor Bahru: Penerbitan Pelangi.
J.3. Call no.: QA 276 .K36 1986 J3N2
4. Thomas P. Ryan. (2007). Modern Engineering Statistics. Hoboken, NJ: John Wiley. Call
no.: TA340 .R92 2007
5. Theodore T. Allen. (2006). Introduction to Engineering Statistics and Six Sigma: Statistical
Quality Control and Design of Experiments and System. London: Springer, 2006. Call no.:
TS156 .A44 2006
References
28
1.
2.
3.
4.
5.
References
1. McCabe, W. L. and Smith, P. H. (2005).Unit Operations of Chemical Engineering,
International. 7th Edition. Boston: McGraw-Hill. Call no.: TP155.7 .M32 2005
2. Theodore, Louis Ricci, Francesco. (2010). Mass Transfer Operations for the Practicing
Engineer. Hoboken, N.J.: Wiley.Call no.: TA331 .T43 2010
3. Sachdeva, R. C. (2009). Fundamentals of Engineering Heat and Mass Transfer. Tumbridge
Wells, Kent: New Age Science.Call no.: TJ260 .S22 2009
4. Basmadjian, Diran. (2007). Mass Transfer and Separation Processes: Principles and
Applications. 2nd ed. Boca Raton, FL: CRC Press.Call no.: QC318.M3 .B374 2007
5. Mills, Anthony F. (2001).MassTransfer. 2nd ed. Upper Saddle River, New Jersey: Prentice
Hall.Call no.: QC318.M3 .M54 2001 N1
Year 2 Semester I
5.
Miller, G.T. Jr. (2005). Living in the environment: Principles, connections and solutions
Pacific Grove, CA: Thomson. Call no.: G E105.N544 2005)
Year 2 Semester I
References
1. Occupational Safety and Health Act and Regulations. MDC Publishers Printer Sdn. Bhd.
2001. Call no.: KPG1390.M34 2001 rw N2.
2. Factories and Machinery Act & Regulations. MDC Publishers Printer Sdn. Bhd. 2001. Call
no.: KPG1390.A31967 .A4 2001 rw N1.
3. Ismail Bahari (2006). Pengurusan Keselamatan dan Kesihatan Pekerjaan. Edisi ke-2.
McGraw Hill Education (Malaysia). Call no.: T55.I85 2006.
4. Davies, V. J. and Tomasin K. (2006). Construction Safety Handbook. 2nd ed. London:
Thomas Telford. Call no.: TH443.R43 2006.
5. Anton, Thomas J. (2009). Occupational Safety and Health Management. 3rd ed. New York:
McGraw-Hill. Call no.: T55.A57 1989.
30
References
1. Gabriele Centi, Siglinda Perathoner, Ferruccio Trifiro, Sustainability Industrial Processes,
Wiley- VCH, 2009.
2. Malhotra, Girish.2011, Chemical Process Simplification: Improving Productivity and
Sustainability. Hoboken: John Wiley. Call no.: TP155.7 .M34 2011
3. Cinar A., Palazoglu A.2007, Chemical Process Performance Evaluation. Boca Raton:
CRC, 2007. Call no.: TP155.75 .C56 2007
4. Scholz, Roland W., Binder, Claudia R.2011.Environmental Literacy in Science and
Society: From Knowledge to Decisions. Cambridge; New York: Cambridge University
Press. Call no.: XX(131560.1) request item
5. Brebbia, C. A.Reniers, G.2011.Sustainable Chemistry. Boston: WIT, 2011. Call no.:
TP155.2.E58 .S97 2011
Year 2 Semester II
2.
3.
4.
5.
Year 2 Semester II
References
1. Harrison, R.G., Todd, P. Rudge, S.R. & Petrides, D.P. (2003). Bioseparations Science and
Engineering, Oxford University Press. Call no.: TP248.25.S47 .B56 2003
2. Seader, J.D. & Henley, E.J. (1998). Separation Process Principle. John Wiley & Sons,
Inc., New York. Call no.: TP156.S45 .S36 1998 N1
3. Geankoplis, C. J. (2003). Transport Processes and Unit Operations. 4th ed. Upper Saddle
River, NJ, Prentice Hall. Call no.: TP156.T7 .G42 2003.
4. Daniel Forciniti. (2008). Industrial Bioseparations: Principles and Practice. Ames, Iowa:
Blackwell. Call no.: TP248.25.S47 .F67 2008
5. B.Sivasankar. (2005). Bioseparations: Principles and Techniques. New Delhi: PrenticeHall of India. Call no.: TP248.25.S47 .S58 2005
32
5.
Luonan Chen, Rui-Sheng Wang & Xiang-Sun Zhang. (2009). Biomolecular Networks:
Methods and Applications in Systems Biology. Hoboken, NJ: John Wiley. Call no.: QH506
.C43 2009
Year 2 Semester II
References
1. Devlin, Thomas M. 2011, Textbook of Biochemistry: With Clinical Correlations. 7th ed.
Hoboken, NJ: John Wiley. Call no.: QP514.2 .T49 2011
2. Bhagavan, N. V.Ha, Chung-Eun. 2011. Essentials of Medical Biochemistry: With Clinical
Cases. Oxford: Academic. Call no.: RB112.5 .B42 2011
3. Denniston, K. J.Topping, Joseph J.Caret, Robert L. 2011. General, Organic, And
Biochemistry. New York, NY: McGraw Hill. Call no.: QD253.2 .D46 2011
4. Horton, H. Robert. 2006. Principles of Biochemistry. 4th ed. Upper Saddle River, NJ:
Pearson. Call no.: QP514.2 .P74 2006
5. Horton, H. Robert. 1996. Principles of Biochemistry. 2nd ed. Englewood Cliffs, NJ:
Prentice Hall. Call no.: QP514.2 .P74 1996 N1
33
Year 3 Semester I
References
1. Himmelblau, David Mautner. James B. Riggs 2004. Basic Principles and Calculations in
Chemical Engineering. 7th ed, Upper Saddle River, NJ: Prentice Hall. Call no.:
1000244887
2. Max S. Peters and Klaus D. Timmerhaus.1991.Plant Design and Economics for Chemical
Engineerr, 4th Ed. New York: McGraw-Hill. Call no.: TP155.5 .P47 1991 N1
3. Sieder, W.D., Seader J.D. & Lewin D.R.2009.Product and Process Design Principles:
Synthesis, Analysis & Evaluation. 3rd ed.Hoboken, NJ: John Wiley. Call no.: TP155.7 .S44
2009.
4. John A. White .et al.1998. Principles of Engineering Economic Analysis. 4th ed. New
York: John Wiley. Call no.: TA177.4 .P74 1998
5. James R. Couper.et al.2010. Chemical Process Equipment: Selection and Design. Rev 2nd
ed. Amsterdam: Elsevier. Call no.: TP157 .C43 2010
References
1. Asenjo, Juan A. Merchuk, Jose C. (1995). Bioreactor System Design. New York: Marcel
Dekker. Call no.: TP2480.25 .B56 1995
2. Shang-Tian Yang. (2007). Bioprocessing for Value-added Products from Renewable
Resources: New Technologies and Applications. Elsevier. Call no.: TP248.3 .B57 2007
3. Gordana Vunjak-Novakovic, R. Ian Freshney (2006). Culture of Cells for Tissue
Engineering. Wiley VCH. Call no.: R857.T55 .C84 2006
4. Hochfeld, William L. (2006).Producing Biomolecular Substances with Fermenters,
Bioreactors and Biomolecular Synthesizers. Boca Raton, FL: Taylor & Franci. Call no.:
TP248.25.B55 .H62 2006
5. Manish L. Srivastava (2008). Fermentation technology. Oxford, UK: Alpha Science. Call
no.: QR151 .S64 2008
Year 3 Semester I
References
1. Green, Don W.Perry, Robert H. (2008). Chemical engineers' handbook. New York:
McGraw-Hill.Call no.: TP151 .P47 2008
2. Mayers, Fred E.Stephens, Matthew P. (2005).Manufacturing Facilities Design and Material
Handling. Columbus, OH: Pearson. Call no.: TS184 .M39 2005
3. M. Peters and K. Timmerhaus. (1991). Plant Design and Economics for Chemical
Engineer. McGraw-Hill. Call no.: TP155.5 .P47 1991 N1
4. Ullmann, Fritz. (2005). Chemical Engineering and Plant Design. Weinheim: John Wiley.
Call no.: TP155.5 .U54 2005 v.1
5. Nandagopal, N. S. (1993). Process plant layout and piping design. Englewood Cliffs, NJ:
PTR Prentice Hall. Call no.: TP155.5 .B38 1993
2.
3.
4.
5.
Year 3 Semester I
References
1. Henze, M. 2008. Biological wastewater treatment: principles, modelling and design.
London: IWA. Call no.: TD755 .B57 2008
2. Metcalf and Eddy, Inc. 2001. 9, 4th ed., McGraw-Hill Inc., New York, NY. ISBN:
9780070418783. Call no.: TD645 .W38 2003
3. Henze, M., Harremoes, P., la Cour Jansen, J., and Arvin, E. Wastewater Treatment,
Biological and Chemical Processes, 3rd edition, Springer-Verlag, Berlin Heidelberg,
Germany. Call no.: TD745 .W37 2002 N1
4. Wise, Donald L.2000. Bioremediation of contaminated soils. New York: Marcel Dekker.
Call no.: TD878 .B56 2000
5. Singh, Shree N.Tripathi, Rudra D.2007. Environmental bioremediation technologies.
Berlin: Springer. Call no.: TD192.5 .E58 2007
6. McCarty, Perry L. Rittmann, Bruce E. 2001. Environmental Biotechnology: Principles and
Applications. Boston: McGraw-Hill. Call no.: TD192.5 .R58 2001 N1.
36
References
1. Penerbit UTHM. 2008. Garis panduan latihan industri. Unit hubungan korporat dan
industri (UHKI).
37
Year 3 Semester II
Year 4 Semester I
5.
Year 4 Semester I
4.
Year 4 Semester I
40
BPK20802 Entrepreneurship
Synopsis
The course introduces students to the fundamental aspects of entrepreneurship. The course
includes introduction to entrepreneurship, characteristics and motivations of a entrepreneur,
search for opportunity by analysing business environment, and developing and managing
business. Students will also be exposed to the real business.
Year 4 Semester II
References
1. Charles E. Bamford, Garry D. Bruton (2011). Entrepreneurship: a small business approach.
New York: McGraw-Hill. Call no.: HD62.5 .B35 2011
2. Schaper M., Volery, T, Weber, P., Lewix, K., (2011). Entrepreneurship and small busiess;
3rd Asia-Pacific Edition. John Wiley & Son. Call no.: HD2341 .E57 2011
3. Hisrich, R.D., Peter, M.P., Shepherd, D.A., (2010). Entrepreneurship, 8th Edition. McGraw
Hill. Call no.: HD62.5 .H57 2010
4. Donald F. Kuratko, Richard M. Hodgetts. (2007). Entrepreneurship: theory, process,
practice, 7th Edition. Mason: Thomson South-Western. Call no.: HB615 .K87 2007
5. John. B., Tidd. J., (2011). Innovation and entrepreneurship. 2nd Edition. Chichester, West
Sussex, UK Call no.: HD53 .B48 2011
Year 4 Semester II
References
1. Montgomery, D.C. 2005. Introduction to Statistical Quality Control, 5th edition,
Hoboken, NJ: John Wiley. [TS156 .M66 2005]
2. Foster, S. Thomas, 2004. Managing quality: An integrative approach, 2nd ed. Upper
Saddle River, NJ: Pearson Education. [HF5415.157 .F67 2004]
3. Haider, Syed Imtiaz and Ashok, Anika 2009. Biotechnology: A comprehensive training
guide for the biotechnology industry Boca Raton, FL: CRC. [TP248.22 .H34 2009]
4. Moo-Young, Murray 2011. Comprehensive biotechnology: Principles and practies in
industry, agriculture, medicine and the environment, Boston, MA: Elsevier. [TP248.15
.C65 2011 v. 1 ca]
5. Funk, W., Dammann, V. and Donnevert, G. 2007. Quality assurance in analytical
chemistry: Applications in environmental, food and materials analysis, biotechnology and
medical engineering, 2nd ed. Weinheim: John Wiley. [QD75.4.Q34 .F86 2007]
43
Year 4 Semester II
Year 4 Semester II