Professional Documents
Culture Documents
[Product Name]
[Product Version]
[Manual Title]
[Manual Subtitle]
Issue
[Manual Version]
Date
[Publish Date]
Copyright Huawei Technologies Co., Ltd. [Copyright Year Declaration]. All rights reserved.
No part of this document may be reproduced or transmitted in any form or by any means without prior written
consent of Huawei Technologies Co., Ltd.
Notice
The purchased products, services and features are stipulated by the contract made between Huawei and the
customer. All or part of the products, services and features described in this document may not be within the
purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information,
and recommendations in this document are provided "AS IS" without warranties, guarantees or representations
of any kind, either express or implied.
The information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute the warranty of any kind, express or implied.
Website:
http://www.huawei.com
Email:
support@huawei.com
[Product Name]
[Manual Title]
Contents
Contents
1 Introduction to the N68E Cabinet...........................................................................................1-1
1.1 Appearance......................................................................................................................................................1-2
1.2 Technical Specifications.................................................................................................................................1-2
1.3 Components.....................................................................................................................................................1-3
1.4 Operating Environment...................................................................................................................................1-5
1.5 Structural Features...........................................................................................................................................1-5
Index.................................................................................................................................................i-1
iii
[Product Name]
[Manual Title]
1-1
[Product Name]
[Manual Title]
1.1 Appearance
The N68E cabinet complies with the requirement of the Dimensions of Mechanical Structures
of the 482.6 mm (19 Inch) Series (IEC 60297-2 Standard). The N68E cabinet is designed with
a modular structure, which facilitates expansion and maintenance. The surface of the cabinet
and the rack is NC purplish grey.
Figure 1-1 shows the appearance of the N68E cabinet.
Figure 1-1 Appearance of the N68E cabinet
Maximum
Installation
Height
Inside the
Cabinet
Dimension (W x D x H)
Weight of an Empty
Cabinet
N68E-22
46U
100kg
243187
1-2
[Product Name]
[Manual Title]
l 1 U = 1.75 in. or 44.45 mm. U is the height unit defined in the IEC 60297 standard.
l The weight of an empty cabinet includes the weight of the front door, rear door, left side panel, and
right side panel.
1.3 Components
The N68E cabinet consists of a front door, a rear door, two side panels, and a rack.
Figure 1-2 shows the structure of the N68E cabinet.
1-3
[Product Name]
[Manual Title]
1
3
1 Front door
1-4
2 Rear door
3 Side panels
4 Rack
[Product Name]
[Manual Title]
Relative Humidity
NOTE
l The temperature and humidity of the equipment room refers to the values measured 1.5 m above the
ground and 0.4 m in front of the equipment.
l The short term means that the operating time does not exceed 48 hours continuously or 15 days a year.
Cabinet Material
The N68E cabinet is a cabinet with electro-galvanized steel sheets and cold-rolled steel sheets
assembled by screws. The fireproof performance of internal materials complies with the
standards of the Underwriter Laboratories (UL).
Cabling Mode
Cable holes are reserved on the top and at the bottom of the N68E cabinet. The N68E cabinet
supports overhead cabling and underfloor cabling.
ESD Jack
Before installing the N68E cabinet, you must wear an ESD-preventive wrist strap and ensure
that the connector of the ESD-preventive wrist strap is connected properly to the ESD jack in
the middle of the N68E cabinet, as shown in Figure 1-3.
1-5
[Product Name]
[Manual Title]
Heat Dissipation
The front door, rear door, and bottom plate of the N68E cabinet have high-density air vents.
Therefore, the N68E cabinet supports front air intake, back air exhaust, and upper air exhaust
and provides good heat dissipation performance.
Protection Performance
The protection performance of the N68E cabinet is described as follows:
l
The cabinet design takes full account of electromagnetic compatibility (EMC). Therefore,
the N68E cabinet has excellent electromagnetic shielding performance.
The air vents on the bottom plate of the cabinet are installed with air filters. The same
enhances the dust-proof capability of the N68E cabinet.
The grounding resistance of the N68E cabinet does not exceed 0.1 ohm.
Installation Scenarios
The installation scenarios of the N68E cabinet are as follows:
l
The N68E cabinet can also be installed on the antistatic floor. In such a case, the N6X series
supports are required.
Cabinet Combination
The N68E cabinets can be installed side by side. When installing the N68E cabinets side by side,
connect them by using connecting plates, as shown in Figure 1-4.
1-6
[Product Name]
[Manual Title]
1-7
[Product Name]
[Manual Title]
Index
Index
i-1