Professional Documents
Culture Documents
CV-H1X
CV-X Series
Simulation-Software
User's Manual
Read this manual before using the software.
Keep this manual in a safe place for future reference.
Introduction
This manual explains how to install, handle, operate, and pay attention to the PC simulation software CV-X Series
Simulation-Software for the "High-speed, High-capacity, Multi-Camera Machine Vision System CV-X Series". It also
covers precautions regarding use of the software. Read this manual thoroughly to understand the CV-X Series Simulation-Software functions in order to maximize performance of the system.
Always keep this manual in a safe place for future reference.
Please ensure the manual is passed to the end user of the software.
Related manual
Be sure to refer to the following manuals when using the CV-X Series Simulation-Software.
CV-X Series Controller Instruction Manual: Contains specifications and precautions for CV-X Series.
CV-X Series Setup Manual: Contains equipment/product specifications for system connection/initial adoption of
CV-X Series.
CV-X Series User's Manual: Contains specifications, functions, and operation methods for CV-X Series.
CV-X Series Simulation-Software User's Manual (this manual)
Symbols
The following warning symbols are used to ensure safety and to prevent injury and/or damage to property when
using CV-X Series Simulation-Software.
It indicates a hazardous situation which, if not avoided, could result in death or serious injury.
It indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
It indicates a situation which, if not avoided, could result in product damage as well as property damage.
It indicates cautions and limitations that must be followed during operation.
It indicates additional information on proper operation.
CV-H1X-M-NO0-E
Trademarks
Microsoft, Windows, Windows Vista, and Word are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
"SD Memory Card" is a registered trademark of the SD Association.
Other company names and product names noted in this document are registered trademarks or trademarks of
their respective companies. The TM mark and mark have been omitted in this manual.
General Cautions
Do not use the system to protect the human body.
Before starting work or before starting the system, confirm that all the functions of the system are working
properly.
If any Keyence product fails, take all safety precautions to prevent damage before using the system again.
If the system is used beyond published specifications or if the system is modified, the functions and performance cannot be guaranteed.
Please note that when the CV-X Series is used in combination with other instruments, its functions and performance may be degraded.
Cautions
When using the CV-X Series Simulation-Software, we recommend closing other applications that are running to
prevent interference with the performance of this software.
Do not run multiple instances of CV-X Series Simulation-Software on the same computer.
An activation code (page 1-13) is required to run this software.
CV-H1X-M-NO0-E
212GB
NOTICE TO USER: PLEASE READ THIS SOFTWARE LICENSE AGREEMENT ("THIS AGREEMENT") CAREFULLY. BY USING ALL OR ANY PORTION OF THE CV-X Series Simulation-Software ("THIS SOFTWARE"), YOU
ARE AGREEING TO BE BOUND BY ALL THE TERMS AND CONDITONS OF THIS AGREEMENT. IF YOU DO
NOT AGREE TO THE TERMS OF THIS AGREEMENT, DO NOT USE THIS SOFTWARE.
If you install, copy and or use all or a portion of this Software on a device or computer, you will be deemed to have
agreed to all the terms of this Agreement, and this Agreement will come into effect.
1. Definitions
1.1. "Use" or "using" refers to the accessing, installing, downloading, copying, operating and or otherwise benefiting
from the utilization of this Software.
1.2. "This Software" denotes the software and all associated documentation provided by KEYENCE.
1.3. "User" or "User's" infers the company or persons who have had the license to use this Software granted to
them by KEYENCE.
2. Grant of License.
2.1. In compliance with all of the terms and conditions of this Agreement, KEYENCE grants the nonexclusive and
non-transferable license to install and use this Software.
2.2. The granting of the license permits the single reproduction and or copying of this Software for the User's backing up or archiving purposes.
2.3. This Software maybe installed on multiple devices and computers for the User's benefit and use.
2.4. The transfer of this Software via devices and computers with this Software installed on them by the User to
third parties is permitted. In such a case, the third party who receives this Software may continue to use this
Software in the same manner as the previous User.
2.5. With the transfer of this Software to a third party, the original User may install this Software to additional
devices and computers for further use as required. In such a case, the third party who receives this Software
may continue to use this Software in the same manner as the previous User.
2.6. The User maintains and guarantees that any thirdparties (as detailed in the previous two sections) who receive
and use this Software agree to this license Agreement and comply with all the terms and conditions.
3. Restrictions.
3.1. This Software may not be modified by the User in any form except from the installation of updates or new functions provided by KEYENCE.
3.2. The reverse engineering, decompiling or disassembling of this Software by any persons are not permitted.
3.3. Without the prior permission of KEYENCE, the User may not reproduce or copy this Software for selling or distributing to a third party.
4. Intellectual Property Rights.
Except as stated herein, KEYENCE reserves all rights, titles and interests in this Software, along with all associated
copyrights, trademarks, and other intellectual property rights.
5. Disclaimer.
This Software is licensed to the User "AS IS" and without any warranty of any kind. In no event does KEYENCE or
its suppliers accept or assume any liability for any damages, claims, costs or profit loss as a result of operating this
Software.
CV-H1X-M-NO0-E
6. Termination.
6.1. Under this Agreement the User's license will automatically terminate if this Software and any associated copies of this Software are destroyed or voluntarily returned to KEYENCE.
6.2. Under this Agreement the User's license will terminate immediately and automatically without any notice from
KEYENCE if there is any failure to comply with any of the terms and conditions of this Agreement. Upon termination, the using of this Software shall cease, and all copies (full or partial) of this Software should be
destroyed or returned to KEYENCE.
6.3. Compensation will be sought by KEYENCE should any violation or breach of this Agreement result in any
incurred costs or lost profit to KEYENCE.
7. Governing Law.
7.1. This Agreement will be governed by and construed in accordance with the substantive laws of Japan.
7.2. If any part of this Agreement is found void and unenforceable, the rest of this Agreement will remain intact,
valid and enforceable according to the associated terms and conditions.
CV-H1X-M-NO0-E
Table of contents
Introduction ......................................................................................................................................1
General Cautions .............................................................................................................................................2
Cautions ..........................................................................................................................................................2
Chapter 1 Installation
Package Confirmation .................................................................................................................1-2
Operating Environment ...............................................................................................................1-3
Installation ....................................................................................................................................1-4
Installing from DVD-ROM .......................................................................................................................................1-4
Installing from Downloaded File .............................................................................................................................1-8
Uninstallation .............................................................................................................................1-11
Obtaining an Activation Code ...................................................................................................1-13
Installing the USB driver (CV-X200 Series only) .....................................................................1-14
CV-H1X-M-NO0-E
Tools ...........................................................................................................................................3-13
Printing the Calibration Pattern ............................................................................................................................ 3-13
Help .............................................................................................................................................3-14
Displaying the Help File........................................................................................................................................3-14
Displaying the Version Information....................................................................................................................... 3-14
CV-H1X-M-NO0-E
Chapter 4 Simulator
Starting and Shutting Down the Simulator ................................................................................4-2
Starting the Simulator ............................................................................................................................................. 4-2
Shutting Down the Simulator .................................................................................................................................. 4-2
Functions ....................................................................................................................................4-15
Changing the Simulation ...................................................................................................................................... 4-15
Changing Display Preferences .............................................................................................................................4-24
Tools ...........................................................................................................................................4-27
User Manual Auto-Generator ............................................................................................................................... 4-27
Printing the Calibration Pattern ............................................................................................................................ 4-31
Help .............................................................................................................................................4-32
Displaying the Help File........................................................................................................................................4-32
Displaying Version Information.............................................................................................................................4-32
Appendix
Error Message List ...................................................................................................................... A-2
Index ............................................................................................................................................. A-4
CV-H1X-M-NO0-E
Chapter
Installation
This chapter provides an overview of the software and an explanation of the conditions necessary for the operation of this device.
CV-H1X-M-NO1-E
1-1
Package Confirmation
The following item is included in this package. Confirm that this item is included before use.
This DVD-ROM includes installer, PDF manual and software. Keep the DVD in a safe place once installation is
complete.
A backup of the software should be made in case that the DVD-ROM is accidently damaged.
The item is to be present and functional. If it is missing or broken, please contact your nearest KEYENCE
sales office.
For details on the contents of the DVD-ROM, see the installation guide screen found on the DVD-ROM.
1-2
CV-H1X-M-NO1-E
Operating Environment
The following conditions must be met before using this software.
Computer specifications
Compatible OS
Microsoft Windows Vista Home Basic, Home Premium, Business, Ultimate, Enterprise
Microsoft Windows 7 Home Premium, Professional, Ultimate, Enterprise
This software only supports operating systems for the following languages: English, Chinese
(traditional and simplified), Japanese, Korean, Thai, German, French, Italian, Spanish (Mexican),
Portuguese (Brazil), Vietnamese and Indonesian.
Supports the 64-bit version of Microsoft Windows 7 only.
For all other operating systems, only the 32-bit version is supported.
Operating systems that have not been indicated here cannot be used.
CPU
Memory
2 GB or higher.
Display resolution
Minimum: 1024 x 768 pixels or more. Recommended: 1280 x 1024 pixels or more.
DVD-ROM drive
CV-H1X-M-NO1-E
1-3
Installation
The files on the DVD-ROM or the files that have been downloaded will be executed and installed as specified
on the screen.
1-4
CV-H1X-M-NO1-E
CV-H1X-M-NO1-E
1-5
1-6
CV-H1X-M-NO1-E
10
10
The PDF file of the user manual for this software will
also be installed along with this software. This file will
be accessible from the start menu.
CV-H1X-M-NO1-E
1-7
1-8
CV-H1X-M-NO1-E
CV-H1X-M-NO1-E
1-9
1-10
CV-H1X-M-NO1-E
Uninstallation
To uninstall the software, select [Uninstall] from the Windows [Start] menu.
4
CV-H1X-M-NO1-E
1-11
1-12
CV-H1X-M-NO1-E
To obtain the Activation Code, please contact the Keyence representative in your area at Global Home: <http://
www.keyence.com/>.
You will need to supply the User ID that is displayed
when you start the software.
The activation code is only for the user ID for which
a request was submitted.
CV-H1X-M-NO1-E
1-13
1
2
Connect the USB port of the controller with the USB port
1-14
CV-H1X-M-NO1-E
Chapter
CV-H1X-M-NO2-E
2-1
Software Overview
CV-X Series Simulation-Software is for use with the "High-speed, High-capacity, Multi-camera Machine
Vision System CV-X Series".
Overview
This software simulates the CV-X Series and creates manuals according to the content of the program setting. It
consists of the workspace manager, which serves as the CV-X Series controller, and the simulator, which simulates
the operation of the CV-X Series.
In the workspace manager, you can select the workspace to be simulated and start the simulator.
The simulator allows you to edit the CV-X Series settings and check the results from a computer.
You can also use Ethernet, USB (CV-X200 Series only) or an SD card to transfer data between the CV-X Series
controller and a computer.
Settings
Import
Export
Upload
Download
Workspace manager
Simulator
Launch
2-2
CV-H1X-M-NO2-E
Software functions
Workspace Manager
1. Create new workspace
2. Copy workspace
3. Start simulator
4. Upload/Download
5. Import/Export
Simulator
1. Simulator
The operation of the CV-X Series can be simulated on a computer.
This simulator can be used to specify and edit settings, output data, and analyze statistics.
2. User Manual Auto-Generator
You can create the manual that describes the CV-X Series program settings.
The manual is saved in Microsoft Word .doc format.
An activation code is required to run this software.
For more details, refer to "Obtaining an Activation Code" (page 1-13)
Workspace
A simulation environment must be created to use the simulator. This environment is called the "workspace". The
user can register the settings to the "workspace". These settings are required to simulate an operating environment,
including camera settings (such as image folder and image data), the controller type, and the software package.
You can recreate the CV-X Series environments by creating and switching between multiple workspaces on the
computer.
CV-H1X-M-NO2-E
2-3
SD1
cv-x
setting
SimImage
001
SD2
The location for creating the workspace folder (base path) can be changed to a custom location. For details, see
"Changing the Workspace Base Path Settings" (page 3-12).
2-4
CV-H1X-M-NO2-E
CV-H1X-M-NO2-E
2-5
Menu bar
Toolbar
Workspace list
Minimize button
Close button
2-6
CV-H1X-M-NO2-E
Menu bar
This bar displays the menus that contain all of the various commands.
Clicking a menu causes a submenu to appear. Clicking a submenu causes commands to execute.
Minimize button
Close button
Filmstrip
This bar is unique to the simulator. It allows the user to register images and start simulation.
CV-H1X-M-NO2-E
2-7
2-8
CV-H1X-M-NO2-E
Chapter
Workspace Management
This section explains how to use the workspace management software.
CV-H1X-M-NO3-E
3-1
Workspace Menu
This section explains how to use the [Workspace] menu.
3
2
4
5
3-2
CV-H1X-M-NO3-E
lers].
Click [OK].
When the global settings file is uploaded, the
confirmation screen to restart the controller to apply
the settings to the controller appears.
CV-H1X-M-NO3-E
3-3
2
A file to download can be specified by the program
setting.
[Workspace List].
3-4
Click [OK].
CV-H1X-M-NO3-E
Exporting a Workspace
Export setting data in the workspace to a custom location on your computer.
The data can be exported to an SD card, matching the folder configuration of the controller.
CV-H1X-M-NO3-E
3-5
3
Importing a Workspace
Import setting data found in a custom location on your computer to the workspace.
2
3
3-6
removable drive.
CV-H1X-M-NO3-E
Workspace Settings
Perform the following steps to change the workspace settings.
4
5
CV-H1X-M-NO3-E
3-7
Copying a Workspace
Perform the following steps to copy the workspace settings and create a new workspace.
list.
3-8
CV-H1X-M-NO3-E
Deleting a Workspace
Perform the following steps to delete the workspace.
CV-H1X-M-NO3-E
3-9
want to open.
3-10
CV-H1X-M-NO3-E
4
To start simulation, double click the program setting list, or select the program setting you want to simulate, and
then press the Enter key.
CV-H1X-M-NO3-E
3-11
3-12
CV-H1X-M-NO3-E
Tools
This section explains the usage of the [Tool] menu.
3
1
CV-H1X-M-NO3-E
3-13
Help
This section explains the usage of the [Help] menu.
3-14
CV-H1X-M-NO3-E
Chapter
Simulator
This section explains how to run simulations with the simulator and
how to use the User Manual Auto-Generator function that has been
included in the [Tools] menu.
Starting and Shutting Down the Simulator . . . . . . . . . . . . . . . 4-2
Registering Images to be Simulated . . . . . . . . . . . . . . . . . . . 4-3
Running a Simulation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-8
Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-15
Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-27
Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-32
CV-H1X-M-NO4-E
4-1
1
1
button to shut
4-2
CV-H1X-M-NO4-E
Normal Capture
Drag and drop the image you want to simulate onto the
filmstrip.
You can also select multiple image files and drag
CV-H1X-M-NO4-E
4-3
Drag and drop the image you want to simulate onto the
filmstrip.
You can also select multiple image files and drag
and drop them onto the filmstrip at the same time.
4-4
CV-H1X-M-NO4-E
LumiTrax Capture
Registering Images of LumiTrax Capture.
Drag and drop the image you want to simulate onto the
filmstrip.
You can also select multiple image files and drag
and drop them onto the filmstrip at the same time.
CV-H1X-M-NO4-E
4-5
Simulation execution
When you execute a simulation using images that have been captured with LumiTrax, the operation varies
depending on the selected target.
When a LumiTrax image is selected (normal image, shape image 1, shape image 2, shape image 3, texture
image, X tilt image, or Y tilt image): The simulation is executed with the image registered to the filmstrip used as-is
(changing the parameters of the LumiTrax settings will have no effect on the simulation results).
When a source image is selected (normal image, image captured with separate illumination lit, image of a
moving object, or ambient light image): The LumiTrax settings are applied to the image registered to the filmstrip,
and then the simulation is executed (the parameters of the LumiTrax settings have an effect on the simulation
results).
4-6
CV-H1X-M-NO4-E
CV-035C/S035C/
H035C
512 x 480 pixels and 640 x 480 pixels / 24-bit color BMP and
JPEG
CV-035M/S035M/
H035M
512 x 480 pixels and 640 x 480 pixels / 8-bit grayscale BMP
and JPEG
CV-H100C
CV-H100M
CV-200C/S200C/
H200C
1600 x 1200 pixels and 1024 x 960 pixels / 24-bit color BMP
and JPEG
CV-200M/S200M/
H200M
CV-H500C
CV-H500M
CA-H2100C
5104 x 4092 pixels and 2432 x 2050 pixels / 24-bit color BMP
and JPEG
CA-H2100M
CA-HX048C/M
784 x 596 pixels, 640 x 480 pixels and 512 x 480 pixels / 8bit
grayscale BMP and JPEG
CA-HX200C/M
CA-HX500C/M
LJ-V
CV-X270/
X170
CV-X250/
X150
CV-X200/
X100
If the settings for the connected camera do not match the format of the image data being loaded, a black
screen will be displayed while performing measurements. Also, the thumbnail numbers in the filmstrip will
turn red.
CV-H1X-M-NO4-E
4-7
Running a Simulation
This section uses a sample file to explain the simulator.
Trigger Types
1 Top button
Executes the first image on the filmstrip.
2 Reverse button
Executes the image above the selected image on the filmstrip. When the first image is selected, the last image is
processed.
3 Forward button
Executes the image below the selected image on the filmstrip. When the last image is selected or no image is
selected, the first image is processed.
4 Bottom button
Executes the last image on the filmstrip.
5 Retry button
Executes the selected image on the filmstrip.
6 Continuous trigger button (simulation only)
Executes the images on the filmstrip, starting from the image at the top, at the interval (in seconds) specified in [Set
Trigger Interval...]. When the last image is processed, the first image is selected again and processing continues.
The button changes to
while the images are being executed. Click the
button to stop.
4-8
CV-H1X-M-NO4-E
You can also enable the triggers by clicking a thumbnail on the filmstrip.
CV-H1X-M-NO4-E
4-9
Click the trigger button, or press the corresponding trigger key on the keyboard.
The image processing result is displayed on the screen.
The currently selected image is highlighted by a yellow box.
You can also start the simulation of an image by
clicking the corresponding thumbnail on the
filmstrip.
For Multi- Capture/connector capture, click any
image to simulate images of the same generation.
4-10
CV-H1X-M-NO4-E
4
2
Click the trigger button, or press the corresponding trigger key on the keyboard.
The image processing result is displayed on the screen.
The currently selected image is highlighted by a yellow box.
You can also start the simulation of an image by
clicking the corresponding thumbnail on the
filmstrip.
CV-H1X-M-NO4-E
4-11
Language
Character Code
Language
Character Code
English
ASCII
Thai
TIS620
Japanese
SJIS
German
Simplified Chinese
GB13000
French
Traditional Chinese
BIG5
Italian
Korean
Wansung(KSX 1001)
Spanish
CP1252
You can use the software keyboard in the edit numeric operations screen. Double click the screen to use the
computer keyboard.
4-12
CV-H1X-M-NO4-E
There are 11 differences between the simulator and the physical device.
1.
Security Settings
The current controller ID is not registered automatically when the controller ID lock is enabled.
8. System Information
The serial number, controller ID, MAC address, and hardware version are displayed as items on the screen.
Their values are not displayed.
9. Result and image output
The results and images can only be output to an SD card.
10. HDR/Calibration Settings
It is possible to change setting parameters, but it does not work actually.
11. LJ-V Settings
The [Import Program from LJ-V] button will not work.
Names cannot be edited in the [Active Program Selection] dialog.
It is not possible to confirm the LJ-V connection status, error status, or version information in the connection
settings.
It is not possible to confirm using [Display Light Reception Image] and [Display Profile].
CV-H1X-M-NO4-E
4-13
4-14
CV-H1X-M-NO4-E
Functions
This section explains how to use the simulator functions.
2
2
Enter the folder name, and then click the [OK] button.
The following characters cannot be used in the file
name:
[/], [:], [*], [?], ["], [<], [>], [|], [\], [\t] (tab character)
(Note that [\] may be displayed as [].)
CV-H1X-M-NO4-E
4-15
4
2
Enter the folder name, and then click the [OK] button.
The following characters cannot be used in the file
name:
[/], [:], [*], [?], ["], [<], [>], [|], [\], [\t] (tab character)
(Note that [\] may be displayed as [].)
4-16
CV-H1X-M-NO4-E
CV-H1X-M-NO4-E
4-17
4-18
CV-H1X-M-NO4-E
CV-H1X-M-NO4-E
4-19
4
Delete Capture File
2
2
4-20
CV-H1X-M-NO4-E
4
2
Update Thumbnails
Reloads all the capture image storage folders for the camera and updates the thumbnails on the filmstrip.
1
1
CV-H1X-M-NO4-E
4-21
4
2
4-22
CV-H1X-M-NO4-E
4
You can specify an interval of 0.1 to 999.9 seconds. Intervals
can be specified in increments of 0.1 seconds.
The trigger interval cannot be set during repeat
execution.
CV-H1X-M-NO4-E
4-23
To end the full screen view, click the [Close Full Screen
Display] button.
4-24
CV-H1X-M-NO4-E
CV-H1X-M-NO4-E
4-25
4
Show Title Bar and Toolbar
Thumbnail Size
4-26
CV-H1X-M-NO4-E
Tools
This section explains the usage of the [Tool] menu.
menu.
A confirmation dialog that asks whether you want to save the
program setting currently being used in the simulator and create the manual is displayed.
2
2
CV-H1X-M-NO4-E
4-27
1
5
2
3
4
6
Enter the text to be printed in the upper left of the cover page.
You can enter up to 255 single-byte or double-byte characters (including two line breaks).
Enter the text printed at the lower right of the cover. The text is justified to the right.
You can enter up to 255 single-byte or double-byte characters (including 2 line breaks).
When printing the manual on paper, we recommend that you select High Quality. Note that selecting High Quality
may significantly increase the file size.
5
Cover Layout
Specify the reference positions of Text 1, Text 2, and Title in Cover Setup.
Output Language
Select one of the following: English, Japanese, Simplified Chinese, Traditional Chinese, Korean, Thai, German, French, Italian, or
Mexican Spanish.
4-28
CV-H1X-M-NO4-E
2
1
The items that can be output to the manual are displayed in a tree view.
If you want to configure the details of the items to be output to the manual, select the check boxes for those items.
You can expand the tree by pressing [+]. To collapse the tree, press [-].
2
The items to be output to the manual are preconfigured for their respective use.
Check All: Select this option to output all the items to the manual.
Check for Operator only: Select this option to create a manual for operators. The following check boxes are selected: Cover, Display Type
and View, Custom Menu, Supplement, Appendix, and Back Cover.
Check for Admin only: Select this option to create a manual for administrators. The following check boxes are selected: Cover, Display
Type and View, Tool Adjustment, Position Adjustment, Execute Conditions, Supplement, Appendix, and Back Cover.
CV-H1X-M-NO4-E
4-29
Specify the save destination and file name for the manual, and then click the [Save] button.
Files can only be saved in .doc format.
4-30
CV-H1X-M-NO4-E
4
2
used.
Dot Grid: A dot pattern is used.
Pattern interval
Specify the pattern interval. (Default: 10.000)
Ratio of Pattern Interval to Dot Diameter
When selecting [Dot Grid] for [Pattern type], select the ratio
between the pattern interval and dot diameter (dot size) with
% (Default: 30).
CV-H1X-M-NO4-E
4-31
Help
This section explains the usage of the [Help] menu.
4
Displaying Version Information
4-32
CV-H1X-M-NO4-E
Appendix
CV-H1X-M-NOA-E
A-1
A-2
Error ID
Message
Cause
Resolution
W01002
W01003
W01102
W01201
W01202
W01234
W01402
W01404
W01448
W01449
W01450
W01451
W01452
W01453
W01454
CV-H1X-M-NOA-E
Error ID
Message
Cause
Resolution
W01455
S03013
M05002
M05003
No specified workspace is
available.
M05602
M05915
A07001
I00002
I00003
We strongly recommend
installation on a PC that has
Windows Vista/7, as this
software is guaranteed to
operate with these operating
systems.
I00004
Retry installation.
CV-H1X-M-NOA-E
A-3
Error ID
Message
Cause
Resolution
I01001
Unable to uninstall.
Please try again after
terminating the target
application.
C33001
C33004
A-4
CV-H1X-M-NOA-E
Index
P
Paste Capture File ......................................... 4-18
E
Error Message ................................................. A-2
Filmstrip ............................................................2-7
S
Set Trigger Interval ........................................ 4-21
CV-H1X-M-NOA-E
A-4
Symbols .............................................................. 1
Version Information (Simulator) ..................... 4-30
Version Information
Toolbar .............................................................2-6
Tools ...............................................................4-25
Top button ........................................................4-6
A-5
Uninstallation ..................................................1-11
User ID ...........................................................1-13
CV-H1X-M-NOA-E
Revision History
Date of printing
Version
Revision contents
March 2012
First Edition
April 2012
Second Edition
October 2012
Third Edition
March 2013
Fourth Edition
April 2014
Fifth Edition
September 2014
Sixth Edition
(1) KEYENCE warrants the Products to be free of defects in materials and workmanship for a period of one (1) year from
the date of shipment. If any models or samples were shown to Buyer, such models or samples were used merely to
illustrate the general type and quality of the Products and not to represent that the Products would necessarily conform
to said models or samples. Any Products found to be defective must be shipped to KEYENCE with all shipping costs
paid by Buyer or offered to KEYENCE for inspection and examination. Upon examination by KEYENCE, KEYENCE, at
its sole option, will refund the purchase price of, or repair or replace at no charge any Products found to be defective.
This warranty does not apply to any defects resulting from any action of Buyer, including but not limited to improper
installation, improper interfacing, improper repair, unauthorized modification, misapplication and mishandling, such as
exposure to excessive current, heat, coldness, moisture, vibration or outdoors air. Components which wear are not
warranted.
(2) KEYENCE is pleased to offer suggestions on the use of its various Products. They are only suggestions, and it is
Buyer's responsibility to ascertain the fitness of the Products for Buyers intended use. KEYENCE will not be
responsible for any damages that may result from the use of the Products.
(3) The Products and any samples ("Products/Samples") supplied to Buyer are not to be used internally in humans, for
human transportation, as safety devices or fail-safe systems, unless their written specifications state otherwise. Should
any Products/Samples be used in such a manner or misused in any way, KEYENCE assumes no responsibility, and
additionally Buyer will indemnify KEYENCE and hold KEYENCE harmless from any liability or damage whatsoever
arising out of any misuse of the Products/Samples.
(4) OTHER THAN AS STATED HEREIN, THE PRODUCTS/SAMPLES ARE PROVIDED WITH NO OTHER
WARRANTIES WHATSOEVER. ALL EXPRESS, IMPLIED, AND STATUTORY WARRANTIES, INCLUDING,
WITHOUT LIMITATION, THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE,
AND NON-INFRINGEMENT OF PROPRIETARY RIGHTS, ARE EXPRESSLY DISCLAIMED. IN NO EVENT SHALL
KEYENCE AND ITS AFFILIATED ENTITIES BE LIABLE TO ANY PERSON OR ENTITY FOR ANY DIRECT,
INDIRECT, INCIDENTAL, PUNITIVE, SPECIAL OR CONSEQUENTIAL DAMAGES (INCLUDING, WITHOUT
LIMITATION, ANY DAMAGES RESULTING FROM LOSS OF USE, BUSINESS INTERRUPTION, LOSS OF
INFORMATION, LOSS OR INACCURACY OF DATA, LOSS OF PROFITS, LOSS OF SAVINGS, THE COST OF
PROCUREMENT OF SUBSTITUTED GOODS, SERVICES OR TECHNOLOGIES, OR FOR ANY MATTER ARISING
OUT OF OR IN CONNECTION WITH THE USE OR INABILITY TO USE THE PRODUCTS, EVEN IF KEYENCE OR
ONE OF ITS AFFILIATED ENTITIES WAS ADVISED OF A POSSIBLE THIRD PARTYS CLAIM FOR DAMAGES
OR ANY OTHER CLAIM AGAINST BUYER. In some jurisdictions, some of the foregoing warranty disclaimers or
damage limitations may not apply.
E 1101-3
Copyright (c) 2014 KEYENCE CORPORATION. All rights reserved. 124266E 1094-6 212GB Printed in Japan