Professional Documents
Culture Documents
installation guide
1. Printer setting
1.1
If you dont use incompatible cable, the printer may not work properly.
IFA-S type and IFB-S type have Dip switch on the bracket
If you dont use incompatible cable, the printer may not work properly
IFC-S Type is compatible with both Bixolon Samsung and Epson cable specifications.
www. samsungminiprinters.com
2.2
1)
2)
Operating Environment
Microsoft Windows 98 Gold
Microsoft Windows 98 Second Edition
Microsoft Windows Millennium Edition
Microsoft Windows 2000
Microsoft Windows XP
Microsoft Windows 2003 Server
Microsoft Windows Embedded For Point Of Service
www.samsungminiprinters.com
www.samsungminiprinters.com
You can change the baud rate of the printer by setting dip switch of the printer
Refer to the dip switch setting of each model at Appendix A
After changing dip switch setting, please turn off and turn on the printer to affect new setting.
Perform self-test to check if new baud rate was set properly.
In accordance to the printer setting, set the Windows driver properly.
www.samsungminiprinters.com
7) Set the baud rate and other options same as the printer setting (refer to the self-test receipt)
and click OK
6)
Click General tab and press Print Test page to see if the printer works properly.
- End-
www.samsungminiprinters.com
1.
2.
1.
SRP-270
Transmission speed
19,200 bps
2,400 bps
4,800 bps
9,600 bps
SW 2-7
ON
OFF
ON
OFF
SW 2-8
ON
ON
OFF
OFF
Transmission speed
9,600 bps
19,200 bps
38,400 bps
57,600 bps
SW 1-7
ON
OFF
ON
OFF
SW 1-8
OFF
OFF
ON
ON
Transmission speed
9,600 bps
19,200 bps
38,400 bps
115,200 bps
SW 1-1
OFF
ON
OFF
ON
SW 1-2
OFF
OFF
ON
ON
SRP-350
SRP-370/372
www.samsungminiprinters.com
2.
3.
SRP-275
Transmission speed
2,400 bps
4,800 bps
9,600 bps
19,200 bps
SW 2-7
ON
OFF
OFF
ON
SW 2-8
ON
ON
OFF
OFF
Transmission speed
2,400 bps
4,800 bps
9,600 bps
19,200 bps
SW 2-7
ON
OFF
OFF
ON
SW 2-8
ON
ON
OFF
OFF
SRP-500
www.samsungminiprinters.com