Professional Documents
Culture Documents
i.Connect the MRI to COM port of PC having SMART 2000 with a serial
cable.
Figure 1
ii.
Figure 2
1.From MRI Type select type of MRI which is to be read i.e. Analogic
MRI.
2.From Protocol Type select protocol to be used for communicating
with MRI. i.e. SMART Protocol.
3.From COM Port select the COM port where MRI is connected.
iv.
Figure 3
Figure 4
Figure 5
Figure 6
ix.After successfully read the MRI the above screen shown and click on OK.
Precaution: Make sure that the MRI is connected on the right COM port and
is in Dump mode.
1.Connect the MRI to COM port of PC having SMART 2000 with a serial
data cable.
2.Select MRI > MRI Communication from the main menu of SMART
2000.
Figure 7
1.From MRI Type select type of MRI which is to be read i.e. Analogic MRI.
2.From Protocol Type select protocol to be used for communicating with
MRI. i.e. SMART Protocol.
3.From COM Port select the COM port where MRI is connected. Click
Prepare MRI.
Click
on this
tab.
Figure 8
1. Select meter Schedule file name from schedule folder AND Select CLEAR
Figure 9
Figure 10
VIII. Then showing following window click yes. MRI will be preparing.
Figure 11
PRECOSION:
During MRI read operation the PC must not running any other program
loaded in the memory which captures the serial port or which can take
away CPU time such as memory resident program.
Unnecessary key pressing should be avoided while data transfer is taking
place.
Figure 12
Figure 13
Click On this
point
Figure 14
This
massage
appears.
e. Then click on the tab and shown fallowing window. Select Your
like Redio button Demand or Energy choice. E.g. Active (E) and
Active (I).
Figure 15