Professional Documents
Culture Documents
for
To Design Engineering Manufacture, Test, Supply, Handling, Installation, Testing & Commissioning of
Complete Air Conditioning System , Operating for 5 years and Comprehensive Maintenance Contract for
3 Years at "LG Hospital" Maninagar , Ahmedabad.
TENDER NO : AMC/_______________________/2011
NOTICE NO. : _________________________________
(2)
NOV2011
DESCRIPTION
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
AMOUNT
Note: The Total amount of the above shall be considered for L1 selection.
Signature of Tenderer :
Name
Company Seal
Date
TENDER
Date
ABSTRACT
1 OF 39
DESCRIPTION
1.0
1.1
1.1.1
1.2
UNIT
QTY
Nos
UNIT RATES
IN RS.
TOTAL
AMOUNT
RS.
REMARK
ACCESSORIES
1.2.1
Set
1.2.2
Set
R.O.
1.2.3
Set
Nos
2.0
PRIMARY CHILLED
ACCESSORIES :
WATER
PUMPING
SYSTEM
WITH
2.1
Supply, Installation, Testing and Commissioning of True Backpull out type, single suction, Centrifugal Primary Chilled water
pumps with mechanical seal, CI casing and Bronze Impeller designed to operate at more than 80% overall efficiency; the
pump shall be factory assembled and dynamically balanced
with 4 Pole hi-efficiency- EFF1 - TEFC IP 55 Induction Motor,
Flexible coupling with Guard, Corrosion resistant painted MS
factory fabricated base frame with necessary vibration isolators
and rubber flexible bellows at suction and discharge nozzles;
pump shall be insulated as specified at site and supplied with
100 mm dial type pressure gauge with SS needle valve and
fixtures at suction/disc ports.
2.1.1
HVAC TENDER
VOL_I_PLANT ROOM
2 OF 39
DESCRIPTION
UNIT
QTY
Nos
Set
Set
Set
Set
UNIT RATES
IN RS.
TOTAL
AMOUNT
RS.
REMARK
3.1
Supply, Installation, Testing and Commissioning of True Backpull out type, End (single) suction, mechanical seal, Centrifugal
type Variable Speed Secondary Chilled Water pumps with CI
casing and Bronze Impeller - designed to operate at more than
80% overall efficiency; the pump shall be with 4P / TEFC IP55
motor / EFF1 / 2900 Rpm factory assembled base frame with
Flexible Coupling and Guard, rubber bellows at
suction/discharge, Corrosion resistant painted factory
fabricated base frame; pump shall be insulated as specified at
site and supplied with 100 mm dial type pressure gauge with
SS needle valve and fixtures at suction/disc. ports
Design basis for secondary pumping shall be as per design
specifications enclosed separately
Motor rating indicated in Power demand sheet are tentative ;
Pumps shall be selected for best efficiency point on single
operation for each zone and after calculating actual TDh based
on product specific Water Pressure drops for AHU and
Accessories at the time of supply
3.1.1
HVAC TENDER
VOL_I_PLANT ROOM
3 OF 39
DESCRIPTION
4.0
4.1
Supply, Installation, Testing and Commissioning of True Backpull out type, single suction, Centrifugal Primary Condenser
water pumps with mechanical seal, CI casing and Bronze
Impeller - designed to operate at more than 80% overall
efficiency; the pump shall be factory assembled and
dynamically balanced with 4 Pole hi-efficiency EFF 1 - TEFC IP
55 Induction Motor, Flexible coupling with Guard, Corrosion
resistant painted MS factory fabricated base frame with
necessary vibration isolators and Rubber flexible bellows at
suction and discharge nozzles; pump shall be insulated as
specified at site
4.1.1
UNIT
QTY
Nos
Nos
Set
UNIT RATES
IN RS.
TOTAL
AMOUNT
RS.
REMARK
5.1
5.2
5.2.1
HVAC TENDER
5.2.2
Set
5.2.3
Set
VOL_I_PLANT ROOM
4 OF 39
DESCRIPTION
6.0
6.1
6.2
UNIT
QTY
Set
R.O.
( 1 Working + 1 Standby )
Set
R.O.
6.3
No
6.4
Air Separators
No
Lot
6.2.1
UNIT RATES
IN RS.
TOTAL
AMOUNT
RS.
REMARK
HVAC TENDER
7.0
Documentation in 3 Set
7.1
7.1.1
7.1.2
7.1.3
7.1.4
7.1.5
Technical Detail of all the equipments - High Side and Low side
7.1.6
7.1.7
7.1.8
7.1.9
VOL_I_PLANT ROOM
5 OF 39
DESCRIPTION
UNIT
QTY
Lot
UNIT RATES
IN RS.
TOTAL
AMOUNT
RS.
REMARK
8.0
8.1
Name
Company Seal
Date
HVAC TENDER
Date
VOL_I_PLANT ROOM
6 OF 39
Sr. No.
Description
Unit
1.0
1.1
Qty
Unit
Total
Rates in
Amount Rs.
Rs.
Remark
NOS.
AHU Motor starter shall be in the scope of AHU Supply. The starter
should be equipped with required DC supply as per attached
drawing 1-HVAC-19-20. The DC Voltage shall be as per specific
requirement of valve control. Upstream incoming AHU power cable
up to starter panel shall be in electrical contractor's scope and down
stream cable from panel onwards to filed shall be part of AHU SITC
job including terminations. The panel shall be compatible for BMS
system integration.
Areas located as per Load Summary and with following duty points
1.1.1
1.1.2
1.1.3
1.1.4
1.2
HVAC TENDER
7 OF 39
Sr. No.
Description
2.0
2.1
2.1.1
2.1.2
4.0
4.1
Unit
Qty
Sets
R.O.
Sets
R.O.
Unit
Total
Rates in
Amount Rs.
Rs.
Remark
250 mm NB
RMT
R.O.
4.1.2
200 mm NB
RMT
55
4.1.3
150 mm NB
RMT
70
4.1.4
125 mm NB
RMT
60
HVAC TENDER
4.1.5
100 mm NB
RMT
175
4.1.6
80 mm NB
RMT
220
4.1.7
65 mm NB
RMT
45
4.1.8
50 mm NB
RMT
450
4.1.9
40 mm NB
RMT
225
4.1.10
32 mm NB
RMT
135
4.1.11
25 mm NB
RMT
25
4.1.12
19 mm NB
RMT
R.O.
5.0
5.1
8 OF 39
Sr. No.
HVAC TENDER
Description
Unit
Qty
5.1.1
250 mm NB
RMT
200
5.1.1
200 mm NB
RMT
130
5.1.2
150 mm NB
RMT
R.O.
5.1.3
80 mm NB
RMT
50
5.1.4
50 mm NB
RMT
30
6.0
DRAIN PIPING :
6.1
6.1.1
50 mm NB
RMT
150
6.1.2
40 mm NB
RMT
85
6.1.3
32 mm NB
RMT
85
6.1.4
25 mm NB
RMT
25
6.1.5
20 mm NB
RMT
R.O.
7.0
7.1
Nos
7.2
Nos
8.0
8.1
200 mm NB
Nos
R.O.
8.2
150 mm NB
Nos
R.O.
8.3
80 mm NB - CHW Tapping
Nos
R.O.
8.4
65 mm NB - CHW Tapping
Nos
R.O.
8.5
9.0
9.1
250 mm NB
Nos.
9.2
200 mm NB
Nos.
14
9.3
150 mm NB
Nos
16
Unit
Total
Rates in
Amount Rs.
Rs.
Remark
9 OF 39
Sr. No.
Description
Unit
Qty
9.4
125 mm NB
Nos
R.O.
9.5
100 mm NB
Nos
9.6
80 mm NB
Nos
9.7
65 mm NB
Nos
R.O.
9.8
50 mm NB
Nos.
30
9.1
9.1.1
40 mm NB
Sets
57
9.1.2
32 mm NB
Sets
20
9.1.3
25 mm NB
Sets
36
9.2
50 mm NB
Sets
R.O.
9.2.2
40 mm NB
Sets
R.O.
9.2.3
32 mm NB
Sets
R.O.
9.2.4
25 mm NB
Sets
HVAC TENDER
9.3.1
Sets
9.3.2
200 mm NB Wafer Type Dual Plate Check Valve for CDSW pump
Sets
Discharge
9.3.3
Sets
9.3.4
150 mm NB Wafer Type Dual Plate Check Valve for CDSW pump
Sets
Discharge
9.3.5
Sets
9.3.6
Sets
R.O.
9.3.7
Sets
R.O.
9.3.8
Sets
9.3.9
Sets
13
9.3.10
Sets
Nos
29
9.4
Remark
9.2.1
9.3
Unit
Total
Rates in
Amount Rs.
Rs.
9.4.1
15 mm NB
10.0
INSULATED
CHILLED
WATER
PRESSURE
INDEPENDENT
BALANCING CUM CONTROL VALVE (PIBV) WITH MODULATING
ACTUATOR FOR AIR HANDLING UNITS REGULATED BY
CONTROLLER SUPPLIED VIDE ITEM 1.3 OF BOQ VOL 2
10 OF 39
Sr. No.
10.1
Description
Unit
Qty
Unit
Total
Rates in
Amount Rs.
Rs.
Remark
10.1.1
Nos
R.O.
10.1.2
80 mm NB Pipe Size
Nos
R.O.
10.1.3
65 mm NB Pipe Size
Nos
R.O.
10.1.4
50 mm NB Pipe Size
Nos
10.1.5
40 mm NB Pipe Size
Nos
12
10.1.6
32 mm NB Pipe Size
Nos
10.1.7
25 mm NB Pipe Size
Nos
R.O.
10.1.8
20 mm NB Pipe Size
Nos
R.O.
HVAC TENDER
11.0
11.1
11.2
12.0
12.1
12.2
Nos
Nos
12.3
Nos
13.0
13.1
Nos
76
13.2
Dial type pressure gauge with 4" dial - Master Calibrated Set
Nos
11 OF 39
Sr. No.
Description
Unit
14
15
15.1
Qty
Unit
Total
Rates in
Amount Rs.
Rs.
Remark
R.O.
15.1.1
50 mm NB Pipe Size
Nos
R.O.
15.1.2
40 mm NB Pipe Size
Nos
R.O.
15.1.3
32 mm NB Pipe Size
Nos
R.O.
15.1.4
25 mm NB Pipe Size
Nos
R.O.
16.0
16.1
16.1.1
SQM
R.O.
16.1.2
SQM
R.O.
16.1.3
SQM
R.O.
16.1.4
SQM
R.O.
16.2
HVAC TENDER
16.2.1
SQM
R.O.
16.2.2
SQM
R.O.
16.2.3
SQM
R.O.
16.2.4
SQM
R.O.
12 OF 39
Sr. No.
16.3
Unit
Qty
Unit
Total
Rates in
Amount Rs.
Rs.
Remark
16.3.1
16.3.2
350
16.3.3
250
17.0
17.1
17.2
Nos
R.O.
SQM.
10
17.3
SQM.
10
17.4
SQM.
17.5
SQM.
17.6
SQM. R.O.
18.0
18.1
18.2
19.0
19.1
19.1.1
19.1.2
20.0
HVAC TENDER
Description
SQM
R.O.
SQM
R.O.
13 OF 39
Sr. No.
20.1
Description
Unit
Qty
13 mm
SQM
75
20.1.2
19 mm
SQM
R.O.
SQM
40
21.0
21.1
Acoustic insulation for plant room using 50mm thick Twiga 300
rigid board stick and GI frame work. Insulation to be covered with
glass fiber cloth & 28 g perforated aluminum sheet.
For Main AHU Rooms
22.0
22.1
23.0
23.1
23.1.1
24.0
Remark
Supply and fixing of acoustic lining inside sheet metal ducts with
13mm / 19 mm thick class O flame retardant sound absorbing
accosound elastrometric nitrile rubber of density 150Kg/cub.mtr and
thermal conductivity of 0.036 W/m k
20.1.1
21.1.1
Unit
Total
Rates in
Amount Rs.
Rs.
25.0
26.0
PVC DRAIN
26.1
Sets
Set
25
Kgs
2500
26.1.1
25 MM
RMT
100
26.1.2
32 MM
RMT
R.O.
26.1.3
40 MM
RMT
R.O.
26.1.4
50 MM
RMT
50
Name
Company Seal
Date
HVAC TENDER
Date
14 OF 39
Description
Unit
Qty
Unit Rates
Total
in Rs.
Amount Rs.
Remark
1.1
HVAC TENDER
15 OF 39
Unit
Qty
12
Description
Unit Rates
Total
in Rs.
Amount Rs.
Remark
AHU-10/11/12/14/15/16/18/19/20/22/23/24
1.1.2
1.1.3
2.0
2.1
Set
R.O.
12
HVAC TENDER
16 OF 39
Description
Unit
Qty
Unit Rates
Total
in Rs.
Amount Rs.
Remark
2.1.2
2.1.3
2.1.4
2.2
Refrigerant piping with hard drawn copper pipes with brazed joints
for liquid and suction lines duly insulated with required thickness
Nitrile Rubber covered with Aluminum Foil interconnecting indoor &
outdoor unit with proper supports and accessories such as
refrigerant shutoff valves at compressor and liquid refrigerant
outlet. Metallic foil membrane shall be applied to provide
resistance against breakdown due to UV radiation for exposed
portion of the Rubber Insulation.
36
Rmt
HVAC TENDER
17 OF 39
2.3
2.3.1
2.4
Description
3.0
OT AHU Accessories
3.1
3.1.1
Unit
Qty
Unit Rates
Total
in Rs.
Amount Rs.
Remark
R.O.
Set
21
Set
R.O.
Set
R.O.
Set
R.O.
4.1
4.1.1
SQM
R.O.
4.1.2
SQM
R.O.
4.1.3
SQM
450
4.1.4
SQM 1450
HVAC TENDER
18 OF 39
Description
4.2
Unit
Qty
4.2.1
SQM
R.O
4.2.2
SQM
R.O
4.2.3
SQM
R.O
4.2.4
SQM
R.O
4.3
Remark
4.3.1
4.3.2
4.3.3
4.3.4
HVAC TENDER
Unit Rates
Total
in Rs.
Amount Rs.
SQM.
350
Set
R.O.
5.0
5.1
SQM.
55
5.2
SQM.
5.3
15
5.4
SQM.
15
5.5
SQM.
15
19 OF 39
Description
6.0
6.1
Unit
Qty
6.1.1
6.1.2
6.1.3
6.1.4
7.0
7.1
Remark
R.O.
SQM 1700
15
Set
R.O.
8.0
8.1
Nos.
R.O.
8.2
Nos.
R.O.
8.3
Nos.
R.O.
9.0
9.1
Job
10.0
10.1
Job
Job
14
10.2
Unit Rates
Total
in Rs.
Amount Rs.
Name
Company Seal
Date
HVAC TENDER
Date
20 OF 39
Description
Unit
Qty
NO.
18
1.0
1.1
Unit Rates
Total
in Rs.
Amount Rs.
Remark
1.2.1
1.3
1.3.1
1.4
1.4.1
20G
SQM
40
1.4.2
22 G
SQM
80
1.4.3
24 G
SQM R.O.
1.5
HVAC TENDER
Supply,
programming,
installation,
testing
and
commissioning of Integrated control and electrical
hardware for operation of Jet Fans and Tube Axial Fans in
Normal and CO/Fire Mode comprising of
VOL_IV_VENTILATION SYSTEMS
21 OF 39
Description
Unit
Qty
1.5.1
1.5.2
1.5.3
NO.
1.5.4
12
1.6
1.7
Power & Control cabling between Jet Fans and Panel / LOT
Signal & Control Cabling between CO Sensors and Jet Fan
Panel PLC/Power Cabling and Control cabling between
TAF Panel and TA Fans
1.8
LOT
1.9
LOT
2.0
Unit Rates
Total
in Rs.
Amount Rs.
Remark
Supply,
installation,
commissioning
2.1
testing,
programming
and
2.1.1
HVAC TENDER
VOL_IV_VENTILATION SYSTEMS
22 OF 39
Description
3.0
3.1
Unit
Qty
Unit Rates
Total
in Rs.
Amount Rs.
Remark
SET
3.1.2
SET
3.1.3
SET
3.1.4
SET
3.1.5
SET
3.1.6
SET
3.1.7
SET
4.0
4.1
NOS
4.2
NOS
4.3
NOS
5.0
5.1
5.1.1
20G
SQM R.O.
5.1.2
22G
SQM
5.1.3
24G
SQM 1140
5.2
HVAC TENDER
Alu. Powder Coated Supply Air Grill with VCD finished to SQM
match the interiors pre-approved by Architect / Client
before supply
VOL_IV_VENTILATION SYSTEMS
340
15
23 OF 39
Description
Unit
Qty
5.3
5.4
12
Set
Unit Rates
Total
in Rs.
Amount Rs.
Remark
Signature of Tenderer :
Name
Company Seal
Date
HVAC TENDER
Date
VOL_IV_VENTILATION SYSTEMS
24 OF 39
Description
Unit
Qty
Remark
1.1
1.1.1
SET
R.O.
1.1.2
SET
R.O.
1.1.3
SET
1.1.4
8.5 TR Nominal Capacity Ductable Split Unit ( Having Twin Scroll Compressor)
SET
1.1.5
SET
1.1.6
8.5 TR Nominal Capacity Ductable Split Unit ( Having Twin Scroll Compressor - 6
Row Coil )
SET
R.O.
1.2
SITC of 3 Star + Rating Hi Wall Mounted Split AC Unit , Having decorative wall
mounted indoor unit with Cordless remote controller. The unit shall have
extended 4 years compressor warranty. ( Refrigerent piping rates are required to
be quoted seperatly by contractor )
1.2.1
SET
1.2.2
SET
29
HVAC TENDER
25 OF 39
Description
2.0
Unit
Qty
Remark
Refrigerant copper piping duly insulated with required thickness closed cell
elastomeric Nitrile Rubber covered with Aluminum Foil interconnecting indoor &
outdoor unit and accessories such as refrigerant shutoff valves at compressor and
liquid refrigerant outlet. Metallic foil membrane shall be applied to provide
resistance against breakdown due to UV radiation for exposed portion of the
Rubber Insulation.
The refrigerant piping shall be laid with proper supports as required.
The said quantities are single line measurement between indoor unit and out door
unit irrespective of number of refrigerant circuit in a ductable or package ac unit
2.1
Rmt
15
2.2
Rmt
15
2.3
Rmt
45
2.8
Rmt
348
2.9
Rmt
12
3.1
3.1.1
SQM. R.O.
3.1.2
SQM. R.O.
3.1.3
SQM. R.O.
3.1.4
SQM. R.O.
3.2
HVAC TENDER
3.2.1
3.2.2
Supply and Installation of:- 20 mm thick pre-insulated ducting sheets of 4m X SQM. 644
1.2m having a PIR density of 45Kg/CuM with 80 Micron Aluminum facing on
both the sides with stucco type finish, duly Class O certified as per BS along with
the standard installation accessories.(Internal Ducting Not exposed to Sunlight
Ducting)
3.2.3
SQM. R.O.
26 OF 39
Description
Unit
4.0
CANVAS CONNECTIONS
4.1
5.0
5.1
5.2
Qty
R.O.
SQM.
5.3
SQM.
5.4
SQM. 1.5
5.5
SQM. 1.5
6.0
SUPPLY, INSTALLATION,
COATED DUCT DAMPERS
6.1
G I Dampers shall be with opposed blade aerofoil blades and PVC gears for SQM.
smooth operation for volume control
6.2
Fusible Link Type Fire Dampers installed at Wall crossings in SA/ RA ducts ( At all SQM. 0.5
wall crossings )
7.0
7.1
Thermal insulation of SA ducting internally with ' X ' mm thick Class O Flame
Retardant EPDM nitrile rubber having Thermal Conductivity - 0.037 at 20 Deg C
& Density - 60 Kg / M3 +/- 10%.
COMMISSIONING
OF GI POWDER
7.1.1
SQM. R.O.
7.1.2
SQM. R.O.
8.0
Remark
SET
TESTING,
HVAC TENDER
8.1
9.0
9.1
Acoustic insulation for plant room using 50mm thick Twiga 300 rigid board stick
and GI frame work. Insulation to be covered with glass fiber cloth & 28 g
perforated aluminum sheet.
SQM.
55
9.1.1
SQM. R.O.
10.0
10.1
Under deck Insulation with 50 mm thick Fire Retardant Extruded Polystrene Board SQM. R.O.
having density of 32 Kg / M3 and thermal conductivity of of 0.028 W/mK or
better at 24 Deg C. The material shall be stuck to slab by G.I. Screw along with
washers only. The Insulation sheets shall be further fixed with G.I. wires
diagonally fixed to each sheet.
27 OF 39
11.0
Description
Unit
Qty
SET
Remark
11.1
12.0
PVC DRAIN
U PVC DRAIN PIPING DULY INSULATED WITH 9 MM NITRILE RUBBER AND BOPP
TAPE OF FOLLOWING SIZE DIA.
12.1
25 MM
RMT
210
12.2
32 MM
RMT
R.O.
12.3
40 MM
RMT
25
12.4
50 MM
RMT
R.O.
Name
Company Seal
Date
HVAC TENDER
Date
28 OF 39
Supply, installation, Programming, Configuration,Calibration, Commissioning, of BAS System Hardwares and Customization Of software as
described below
Sr. No.
Description
1.0
1.1
Central Work Station Server/Client with Core 2 Duo Intel processor with
minimum 200Gb HDD, 1 GB RAM, 15" TFT Monitor, DVD Writer, two serial
and one parallel ports, multimedia speakers, infrared mouse; Work station
shall be preloaded with requisite MS Windows Licensed software compatible
with the offered BMS platform
1.2
1.3
Unit
Qty
No
R.O.
No
Nos
1.4
Ethernet Router
2.0
2.1
Development Version (server version with full function edit facility) unlimited
tags IBMS software supporting LONoverIP / BACNEToverIP with Web
browser as specified with all monitoring/control modules including but not
limited to full function Report / Trending / Alarms / MIMIC / LAN / WAN
modules
User
License
2.2
License
2.3
License
2.4
Job
2.5
Open
Protocol
Integrators
supporting
IP
compatible
for
BACNET/LonWorks/modbus rtu output meeting Vendor's communication
platform
For 2 sets of Chillers
No
2.5.2
No
2.5.3
No
2.5.4
No
DDC System No. 1 for Plant Room as per Plantoom Room IO summary
Set
3.1.2
12
Set
3.1.3
Set
3.0
3.1
4.0
4.1
HVAC TENDER
Total Amount
Rs.
R/O
2.5.1
3.1.1
Unit Rates in
Rs.
29 of 39
Supply, installation, Programming, Configuration,Calibration, Commissioning, of BAS System Hardwares and Customization Of software as
described below
Sr. No.
4.1.1
Description
Unit
12
Nos
4.1.2
Absolute Pressure water Transmitter for Chiller and Condenser water inlet /
outlet with fixtures
Nos
4.1.3
Absolute Pressure water transmitter for pump discharge pressure primary/secondary/Cooling water pumps with fixtures
Nos
4.1.4
Absolute Pressure water transmitter for pump return header pressure with
fixtures
R.O.
Nos
4.1.5
Ultrasonic type clamp on type Flow meter for Chilled Water flow
measurement installed on header with 10 Dia straight length_200 mm
Header with fixtures. Should be BMS compatible, give total flow and flow
rate and retain last value in the memory in case of power losss.
No
4.1.6
Ambient T+Rh transmitter (wall mount type for outdoor duty) with fixtures
No
4.1.7
Nos
4.1.8
R.O.
R.O.
Nos
Nos
Digital Energy Meter supporting MODBUS protocol for main HVAC panel
R.O.
No
R/O
Set
Nos
4.1.9
a
4.1.10
Cooling Tower Sump level switch with SS moving and contact parts including
fixtures as per manufacturer
4.1.11
1.1.12
4.2
Qty
Unit Rates in
R
Total Amount
R
R/O
2
Set
4.2.1
Filter & Fan Status Air DP Switch complete with fixtures, tubing, connectors
complete
63
Nos
4.2.2
13
No
4.2.3
13
Nos
4.2.3.1
AHU Chilled Water Inlet Outlet Sensors with SS Thermowells and fixtures
complete
R/O
4.2.4
2 way pressure independent type auto balancing and control valve with
modulating actuator
4.2.4.1
25 mm NB
R/O
4.2.4.2
32 mm NB
R/O
4.2.4.3
40 mm NB
R/O
4.2.4.4
50 mm NB
R/O
4.2.4.5
65 mm NB
R/O
HVAC TENDER
30 of 39
Supply, installation, Programming, Configuration,Calibration, Commissioning, of BAS System Hardwares and Customization Of software as
described below
Sr. No.
4.2.4.6
80 mm NB
Description
Unit
R/O
4.2.5
4.2.6
4.3
Spring Return type Fire rated Actuators (for OT Smoke Isolation dampers)
with linkages complete
4 Nm
R/O
4.3.2
8 Nm
26
4.3.3
12 Nm
R/O
4 Nm
R/O
4.4.2
8 Nm
R/O
4.5.1
4.6
4.6.1
Nos
Nos
Calibration Work
Calibration of Field devices supplied at site with documentation
Lot
Rmt
4.6.1.1
2Cx1.0 sq. mm
1500
Rmt
4.6.1.2
3Cx1.0 sq mm
1000
Rmt
4.6.1.3
4Cx1.0 sq mm
600
Rmt
4.6.1.4
8Cx1.0 sq mm
R/O
Rmt
4.6.2
R/O
Rmt
4.6.3
2000
Rmt
4.6.4
4.6.4.1
20 NB
1500
Rmt
4.6.4.2
25 NB
1000
Rmt
4.6.4.3
32 NB
R/O
Rmt
4.6.5
Total Amount
R
4.4.1
4.5
Unit Rates in
R
R/O
4.3.1
4.4
Qty
4.6.5.1
100 x 25
150
Rmt
4.6.5.2
200 x 50
R/O
Rmt
4.6.5.3
300 x 50
R/O
Rmt
HVAC TENDER
31 of 39
Supply, installation, Programming, Configuration,Calibration, Commissioning, of BAS System Hardwares and Customization Of software as
described below
Sr. No.
4.7
4.7.1
4.7.2
Unit
Qty
Lot
Lot
Description
Unit Rates in
R
Total Amount
R
TOTAL
Signature of Tenderer :
Name
Company Seal
Date
HVAC TENDER
Date
32 of 39
BILL OF QUANTITY FOR ELECTICAL WORK FOR THE PROPOSED HVAC SYSTEM
Sr. No.
Description
1.0
Unit
Qty
No.
Unit Rates
in Rs.
Total
Amount
Rs.
HVAC PANEL
1)
2)
3)
4)
5)
6)
7)
8)
9)
10)
1.1
1.2
Supply, installation, testing and commissioning of First Floor HVAC Panel No.
as per the IS, specification and single line diagram No. 9-E-DG-2
R.O.
1.6
Supply, Installation, Testing and commissioning of 32 A TPN MCB with IP23 No.
Enclosure as per the IS, Specification. Suitable termination arrangement to
be provided to allow for termination of cable size 4Cx16 Sq. mm. Al. XLPE
Armoured Cable both as incomer and outgoing.
1.7
Supply, Installation, Testing and commissioning of 25 A TPN MCB with IP23 No.
Enclosure as per the IS, Specification. Suitable termination arrangement to
be provided to allow for termination of cable size 4Cx16 Sq. mm. Al. XLPE
Armoured Cable both as incomer and outgoing.
30
1.8
Supply, Installation, Testing and commissioning of Eigth Floor HVAC panel No.
as per the IS, Specification and Single Line Diagram No. 9-E-DG-6
1.9
Supply, Installation, Testing and commissioning of Ninth Floor HVAC panel No.
as per the IS, Specification and Single Line Diagram No. 9-E-DG-7
1.10
Supply, Installation, Testing and commissioning of Tenth Floor HVAC panel No.
as per the IS, Specification and Single Line Diagram No. 9-E-DG-8
1.11
Supply, Installation, Testing and commissioning of Roof Floor HVAC panel No.
as per the IS, Specification and Single Line Diagram No. 9-E-DG-9
1.12
Supply, Installation, Testing and commissioning of Roof Floor Chiller panel No.
as per the IS, Specification and Single Line Diagram No. 9-E-DG-10
HVAC TENDER
VOL-VII-ELECTRICAL DISTRIBUTION
33 of 39
2.0
BILL OF QUANTITY FOR ELECTICAL WORK FOR THE PROPOSED HVAC SYSTEM
Unit Rates
Total
1)
2)
3)
4)
5)
6)
7)
2.1.1
MTR
35
2.1.2
MTR
885
2.1.3
MTR
150
2.1.4
MTR
25
2.1.5
MTR
185
2.1.6
MTR
70
2.1.7
MTR
1125
2.1.8
MTR
925
2.1.9
MTR
125
2.1.10
MTR
1320
2.1.11
MTR
290
2.1.12
MTR
190
2.1.13
MTR
270
2.1.14
MTR
80
2.1.15
MTR
120
2.1.16
MTR
130
HVAC TENDER
VOL-VII-ELECTRICAL DISTRIBUTION
34 of 39
2.2
BILL OF QUANTITY FOR ELECTICAL WORK FOR THE PROPOSED HVAC SYSTEM
Unit Rates
Total
No.
2.2.2
No.
16
2.2.3
No.
2.2.4
No.
2.2.5
No.
2.2.6
No.
28
2.2.7
No.
22
2.2.8
No.
2.2.9
No.
48
2.2.10
No.
10
2.2.11
No.
2.2.12
No.
18
2.2.13
No.
2.2.14
No.
12
2.2.15
No.
Mts.
7670
Mts
1790
3.0
3.1
3.1.1
3.2
3.2.2
Signature of Tenderer :
Name
Company Seal
Date
HVAC TENDER
Date
VOL-VII-ELECTRICAL DISTRIBUTION
35 of 39
DESCRIPTION OF ITEM
QTY
UNIT
UNIT RATE
RS.
AMOUNT
RS.
1.1
Set
1.2
Set
1.3
Set
1.4
Set
1.5
14
Set
1.6
Set
Set
Set
1.7
2.1
Brick work using common burnt clay building bricks having crushing
strength not less than 35 kg/Sq. cm. in foundations and plinth in
cement mortar 1:5 (1 cement : 5 fine sand) (A) Modular
92.1
CuM
3a
739
Smt
3b
Providing and laying Mala plaster in two coats with backing coat in
C.M. 1:4 and finishing coat in C.M. 1:3 finished smooth with mala,
watering etc. complete. No extra shall be paid for plaster grooves.
Internal Walls (Min 15 mm thickness)at all hts.
739
Smt
20mm th.sandface cement plaster on walls upto all hts above ground
level consisting of 12mm thk backing coat of C.M.1:3(1 cement :3
sand) & 8mm thk finishing coat of CM(1:1)1 cement :1
sand,etc.complete
739
Smt
401
Smt
3c
36 of 39
DESCRIPTION OF ITEM
QTY
UNIT
4a
Providing and fixing M.S.hollow structural steel section like SHR, RHS,
tubes etc. or as suggested in contractors's drawing including of all
labours
and
materials
for
all
levels
Profile
Cutting,threading,drilling, Nut-Bolting, Welding and applying Rust
remover and 1-coats of Zinc Chromate / red lead paint and three or
more coats of synthetic enamel paint of approved shade and
made (Asian or Tata or" equi.) as directed and specified as directed
by Architect / Clerk-Of-Work. For all levels, lift and leads.
401
Smt
5.a
R.O.
Set
5.b
Cut out in rcc slab including handling cutting & removing debris from
site and finising plaster of the cutting edges.
23.34
Smt
33
per unit
6a
15.2
CuM
7
7.1
Repainting
Providing & applying 3 coats of water based 100% acrylic emulsion
paint, waterproof and weather proof, Internal paint Apex or
approved equivalent of desired shade, after thoroughly brushing the
surface to remove all dirt and remaining all loose powdered Walls
1050
Smt
UNIT RATE
RS.
AMOUNT
RS.
Name
Company Seal
Date
Date
37 of 39
Unit
Qty
Sq.Mtr.
R.O.
1,800.00 x 2100.00
Sq.Mtr.
R.O.
Sq.Mtr.
952
R.Mtr.
R.O.
Nos.
R.O.
Nos.
R.O.
Door Accessories ;
Nos.
R.O.
Nos.
R.O.
Pair
R.O.
LOT
R.O.
LOT
R.O.
LOT
R.O.
LOT
LOT
Installation Charges :
Sq.mtr.
R.O.
Sq.mtr.
R.O.
Sq.mtr.
816
Aluminium Covings
R.Mtr.
R.O.
Description
Total Amount
Rs.
4
5
TOTAL
Signature of Tenderer :
Name
Company Seal
Date
HVAC TENDER
Date
VOL_IX - PARTITION
38 of 39
DESCRIPTION
1.0
2.0
3.0
4.0
COMPREHENSIVE AMC
RS.
PART OF CONTRACT