Professional Documents
Culture Documents
References
OptiX T2000 Operator Guide for SDH
OptiX iManager T2000 Administrator
Guide for SDH
OSN3500&2500&1500 Configuration
Guide
OSN7500 Configuration Guide
Page 1
Page 2
Page 3
Page 4
Creating Topologies
Recommended Creation Sequence
Step
Description
Creating Links
Page 5
Creating Topologies
Page 6
Creating Topologies
Page 7
Creating Topologies
Page 8
Creating Topologies
Page 9
Creating Topologies
Page 10
Creating Topologies
Searching fibers
Page 11
Creating Topologies
Creating a Topology Subnet
1. Select [File/Create/Subnet].
2. Select the "Basic Attributes" tab. Enter the
information of the subnet.
3. Select the "Object Selection" tab. Select
the created NEs or subnet from the "Object
Not Selected" pane, and add them to the
"Selected Object" pane by clicking the
double-right-arrow button.
4. Click <OK>.
5. Click in the Main Topology.
Page 12
Page 13
Configuring Protection
Equipment level protection
Configuring SNCP
Page 14
Configuring Protection
Equipment Level Protection
Page 15
Configuring Protection
Page 16
Configuring Protection
Network Level Protection
Creating a Two-Fiber MS-SPRing
Select [Configuration/Protection View]
Select [Protection View/Create SDH Protection Subnet/2f_MS SPRing].
Select the rate of the protection subnet.
Double-click on the nodes to be in the protection subnet.
Click <Next>.
Click <Finish> to send the configurations.
Page 17
Configuring Protection
Page 18
Page 19
10
Configuring Service
Configuration Method
Service type
Configuring
SDH/PDH service
Configuring
Ethernet service
Configuring
ATM service
Page 20
Description
Remark
According to trail level:
Viewing Trail
Deleting a Trail
Optional
Optional
Page 21
11
Page 22
Page 23
12
Page 24
Page 25
13
Page 26
Page 27
14
Configuring Clock
Setting the System Clock Source Priority List
Setting Switching Conditions for a Clock Source
Setting Restoration Parameters for a Clock Source
Setting an External Clock Source
Setting the Clock Subnet
Page 28
Configuring Clock
Page 29
15
Configuring Clock
Page 30
Configuring Clock
Page 31
16
Configuring Clock
Right-click the NE icon in the Clock View and select [Clock Source
Priority List].
Set "External Clock Source Mode" and "Synchronous Status Byte"
for the external clock source.
Click <Apply>. The "Operation Result" dialogue box is displayed
and indicates operation succeeded. Click <Close>.
Page 32
Configuring Clock
Right-click the NE icon in the Clock View and select [Clock Subnet Settings].
On the "Clock Subnet" tab, set the clock subnet parameters.
Click <Apply>. The "Operation Result" dialogue box is displayed and indicates operation
succeeded. Click <Close>.
Select the "Clock ID Status" tab. If a clock ID is assigned to the line clock source, set
"Clock ID Status" to "Enabled".
Click <Apply>. The "Operation Result" dialogue box is displayed and indicates operation
succeeded. Click <Close>.
Page 33
17
Configuring Clock
Right-click the NE icon in the Clock View and select [Clock Subnet Setting]. Click the "Clock
Quality" tab.
Set "Configuration Quality".
Click <Apply>. The "Operation Result" dialogue box is displayed and indicates operation
succeeded. Click <Close>.
Select the "Manual Setting of 0 Quality Level" tab. Set the quality for the unknown clock
source.
Click <Apply>. The "Operation Result" dialogue box is displayed and indicates operation
succeeded. Click <Close>.
Page 34
Configuring Clock
Right-click the NE icon in the Clock View and select [Clock Subnet
Setting]. Click the "SSM Output Control" tab.
Set "Control Status" of the clock source.
Click <Apply>. The "Operation Result" dialogue box is displayed
and indicates operation succeeded. Click <Close>.
Page 35
18
Page 36
Page 37
19
Page 38
Page 39
20
Page 40
NE Security Management
Chapter 9
Configuring Communication
Page 41
21
Page 42
Manual Synchronization
Page 43
22
Networkwide Alarms
Select
[Fault/Synchronize Networkwide
Alarms] from the Main Menu. A progress bar is
displayed.
Synchronizing
Select
NE Alarms
Right-click
Page 44
3.Select
4.Click
5.A
Page 45
23
Management/Backup] from the Main Topology. Select immediate backup, and the
system backs up the NM database to the appointed directory immediately
5.To backup periodically, perform the following settings
Page 46
Page 47
24
Creating an NE User
1.Select
2.Select
3.Enter
the name, user level, user flag, password, and detailed description of the
new NE user: e.g. create a unified NE user t2000 for NE1NE5, as shown in the
diagram below. The length of the password of the NE user ranges from 6 to16
characters, including at least one letter and one numeral. And the length of the NE
User ranges from 2 to 8 characters
Page 48
Page 49
25
Configuring communication
Setting NE Communication
Parameters
1. In the NE Explorer, click the
NE and select
[Communication/Set
Communication Parameters]
from the Function Tree
2. Click <Refresh> to update
the communication
parameters
3. Modify the IP, Extended ID,
Page 50
Configuring communication
Changing an Ordinary NE into a GNE
1. Select [System Administration/DCN Management] from the Main Menu
2. Select the NE tab.
3. Right-click an ordinary NE and select [Change to GNE]. The Change to
Page 51
26
Configuring communication
Adding Standby GNEs for an NE
1. Select [System Administration/DCN Management] from the
Main Menu
2. Select the NE tab
3. Select an NE entry, add standby GNEs
4. Click <Apply>
Page 52
Page 53
27
Page 54
2,
3,
Page 55
28
Page 56
Reports
The Network Diagram
The Network wide Data Report
The NE Information Report
The Physical Location Information Report
The Slot Configuration Report
The Board Information Report
The Slot Information Report
The Board Details Report
The Fiber/Cable Connection
Report
..
HUAWEI TECHNOLOGIES CO., LTD.
Page 57
29
Reports
The
Summary
Page 58
answer
How to configure the clock? answer
How to backup the NE data
configuration? answer
Page 59
30
Thank You
www.huawei.com
31